Question about DISH Network EZ Remote Remote Control

1 Answer

I need the programming codes for a Magnovox DVD player. I have a dish network remote. I've searched dozens of sites with no results. =(

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 358 Answers

Jlhakes2,

I saw your post. Are you still having problems programming your DISH remote to the Magnavox DVD player? Some of the codes are different for the different remote models. I have supply some codes for you. The codes are 829, 685, 533, 554, or 556. The instructions are also included below. I hope this helps.

Address To Other Equipment Using Code

  • Remotes: Multiple Mode Buttons (TV,VCR, AUX)
    1. Press and hold the desired Mode button until all mode button backlights come on, then release.
    2. Use the number buttons to enter the device code corresponding to the equipment. AUX Mode: Before entering the device code:
      • Press 0 for a TV
      • Press 1 for a VCR/DVD
      • Press 2 for any other device.
    3. Press the pound (#) button Note: The light will blink off after each digit is entered and then return to a steady light.
    4. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

Ray Calo
DISH Network - Executive Offices

Posted on Jan 15, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Programming dish remote for dvd player


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window " to get gathered related posts.

Jul 03, 2016 | Televison & Video

1 Answer

I need the programming codes for a Dish Network remote controller and a Magnavox DVD/VCR combo player. I also need step by step programming instructions plz. Here's the specific information for both...


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Nov 28, 2014 | Televison & Video

1 Answer

Can't find codes to program my dish remote to


053,018,033 are the codes to check. If you wish to get more details, check this site. Pull up previous posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Three digit, four digit, five digits and two-digit code list are there. Check the site with patience. Surely you'll get a solution to your problem. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter"

Apr 04, 2013 | Televison & Video

1 Answer

Remote code


yes you need to read the manual

Dec 31, 2011 | Aspire Digital AD-1000 DVD Player

2 Answers

I am trying to set a dish network to control my samsung dvd-1000 and a daewoo tv


Hi henry walters,

I know it can be frustrating trying to get the codes to program equipment. You can view the link below to search for any codes you may need for your equipment!

Link: http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx

Let me know if you have any other questions!

Tommy Faust
DISH Internet Response Team

Nov 29, 2011 | DISH Network IR Remote Control

1 Answer

We need the code to type in to control the power on our dish network remote.


Hi my nameis Mike Houston of DISH Network and I see you need the code for the Mintek DVDplayer. We currently do not have a code that goes to the DISH Network remote, wedo have what we call a Power Scan to program the DISH remote to the DVD player.I will send the link to help with these steps, http://www.dishnetwork.com/SupportSection/power-scan-instructions.

May 01, 2011 | Mintek DVD-2580 DVD Player

2 Answers

Device code for mintek dvd. No code for mintek dvd in my user guide for dish network to control power for dvd on my dish remote.


You may want to search for the code by performing a Power Scan, I will include the steps below. If this doesn't resolve this there is most likely a compatibility issue.
Power Scan:
1.) Press and hold the correct VCR button (about six seconds) until all mode button backlights come on, then release.
2.) Press 500 pound (#)
3.) With the desired equipment on, press and hold the VCR/DVD button until all mode button backlights illuminate (about 3 seconds), then release.
4.) Press and release the Power button.
5.) Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
6.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
To verify the code works try several different functions for that equipment.

Daniel Busa
DISH Network
Customer Service

May 01, 2011 | Mintek DVD-1600 DVD Player

1 Answer

Trying to set up dish network remot to apex dvd player


dr172120,

I'm sorry you are having problems programming your DISH Network remote to your Apex DVD player. I looked through our remote codes but I don't show we have a code for an Apex DVD player. We do have remote codes for an Apex TV. You can run a power scan to see if you can find a code for the DVD player. I have provided the instructions to conduct the power scan below. If you have any other question, please post to this site.

Ray Calo
DISH Network - Executive Offices

Address To Other Equipment Using Power Scan
  • Remote: All Remotes (except Basic)
    1. With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate, then release.
    2. Press and release the Power button. AUX Mode: Before pressing and releasing the Power button
      • Press 0 for a TV
      • Press 1 for a VCR/DVD
      • Press 2 for any other device.
      Then Press STAR (*)
    3. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
    4. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

Jan 14, 2011 | DISH Network IR Remote Control

1 Answer

Magnavox blue ray dvd. model nbmgf c need remote code for dish network


Hi there! In order to be able to provide the definite codes that will allow you to program your remote to your Magnavox Blue Ray DVD player, I would need the type of remote that you have- this can be found on the back of your remote, it would be displayed as something along the lines of 3.0, 4.0, 5.0, etc. To obtain a few codes that will likely allow you to successfully program the remote I used 5.0 because it is a common remote that is used with quite a few of our DISH Network receivers. The codes you can try for your DVD player would be, 829 (most successful) if not then please try the following, 685, 533, 554, or 556. After trying those codes if your attempts are still unsuccessful you can also check the manual that came with the DVD player from the manufacturer or just contact us here at DISH Network - although I do know sometimes the remote codes can be located in the manual. Hope the codes help & work for you!

-Kirstie DISH Network

Oct 05, 2010 | DISH Network IR Remote Control

3 Answers

Dish network


With the dish remote and do a code search as described in the remote manual and see if you can find it that way. If you go through the entire code search and none of them turn off the VCR/DVD combo, then there is nothing you can do, as those codes in the remote are all stored in the remote and they cannot be programed in. If you do not have a remote manual to set up the remote, to do a code search, simply go to the dishnetwork web site and search for it.

Sep 27, 2006 | Emerson EWD2004

Not finding what you are looking for?
DISH Network EZ Remote Remote Control Logo

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

S. Gontko

Level 2 Expert

142 Answers

john milligan

Level 3 Expert

514 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...