Question about Janome 2049LX Mechanical Sewing Machine

1 Answer

I have a Janome DC 2010. The machine has started to continue to sew even when my foot is off the foot control. I turn the machine off and then back on and it goes to error message fc....then goes to normal setting. I've been told it is a mechanical problem by one place and that I need a new foot control by another place...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Janome Master
  • 7,365 Answers

My book show the FC stands for Foot Control
have you tryed repluging the foot control into the machine to see if that stops the problem
if you have & it didn't stop the problem
then I agree you need a new foot control

Posted on Sep 28, 2010

  • fionajshanno Dec 05, 2010

    I am having the exact same problem!! very frustrating as it didn't happen when I took it back to the shop I bought it from yesterday. The fc error message does come up, so thanks for that

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHERE CAN I BUY A WALKING FOOT FOR MY RX-1804.


The Janome even feed foot will work with your machine

http://janome.com/en/accessories/sewing-machine-feet/even-feed-foot/

Jan 08, 2015 | Rex RX-1804

1 Answer

My Janome Model DC 3018 sewing machine keeps on sewing after I take my foot off the pedal, how do I stop this from happening?


Check that the pedal has not slipped back under your machine cupboard and is being pressed down continually by cupboard frame and not your foot.
Good Luck

Sep 28, 2014 | Sewing Machines

1 Answer

Schematic singer foot controller model yc 485ec


Backmto the dealer with it and DEMAND a new machine or contact manufacturer,

Apr 29, 2017 | Janome Sewing Machines

1 Answer

Machine does not stop


Foot Control is metal... White non-retractable ??
We probably have a solution for you here
Instant Download Solution for Sewing Machine DC foot control pedal not...

Dec 28, 2013 | Janome Memory Craft 9000 Computerized...

1 Answer

Sewing machine continues to sew after my foot is released from the foot controller


the sewing machine and foot pedal need to be checked for a short in the connections of the machine or the foot pedal or if the foot pedal needs to be replaced

Sep 14, 2013 | Janome DC3050 Computerized Sewing Machine

1 Answer

My Janome sewing machine wont stop.


The only thing I can think of is that the foot pedal may be slightly stuck and not returning fully up after being depressed. Unplug the foot pedal and check for anything stuck there then give it a good wiggle up and down a few times.

Oct 19, 2011 | Janome Memory Craft 9000 Computerized...

1 Answer

How does one attatch the fanome even feed foot to


It sounds like you may have the wrong even feed food. It should be a simple task to put on. the packaging on the foot should say its for Janome horizontal bobbin machines.

May 22, 2010 | Janome 8080 Computerized Sewing Machine

1 Answer

Janome 9000 willl not work when turned on


My Janome 9000 has always done that. I can prevent it by raising the needle when I first start the machine, getting it to sew quickly or raising the needle and letting the machine sit for a few minutes. I think my computer wants to warm up a minute. As you can see I.m not a technical person but it works for me.

Nov 16, 2006 | Janome Memory Craft 9000 Computerized...

Not finding what you are looking for?
Janome 2049LX Mechanical Sewing Machine Logo

Related Topics:

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...