FUSER REPLACEMENT HOW TO REPLACE FUSER BROTHER 4100

Hello,

The problem should be from the printer fuser assembly, the other party will need to replace there fuser assembly on there printer, once that is done, the problem should be fix.

Take care.

Check out this Article for Replacement and Reset Procedure for the Brother 8460
http://www.fortwayneprinterrepair.com/wordpress/2012/02/12/replace-fuser-message-reset-brother/

If you need further help, I’m available over the phone at https://www.6ya.com/expert/kevin_6c091a6aba0555a3

THIS IS A HARD ONE, THE BEST THING THAT CAN TELL YOU IS TO LUBRICATE ALL THE GEARS IN THE MACHINE, THERE IS A SLIGHT POSIABLITY THAT IT IS COMING FROM THE FUSER MODULE

Hi,
you need an maintenance kit 4100

ACC C8057A Maintenance Kit, Fuser, 110V, LJ 4100 LJ 4100 Series ACC C8057-67901 Maintenance Kit, Fuser, 110V, LJ 4100 LJ 4100 Series ACC C8058A Maintenance Kit, Fuser, 220V, LJ 4100 LJ 4100 Series
Selected Item RG5-5069-000 See RG5-5069-090 Not Available 0
Alternate Item(s) RG5-5069-090 Fuser Film ***'y, 220V, LJ 4100 180.50 2 http://www2.printerworks.com/cgi-win/tpwall.exe/find?RG5-5069-000

HP LJ 4100 Fuserkit RG5-5069 HP

Although it fit the broken fuser, it does not mean it's ok.
1-they must have the same number of teeth ( diif. gears have diff. amounts of teeth)
2-it must be the same diameter ( so they can mesh together, otherwise it's touching the tip of hte teeth and may be skipping.

But I'm not sure the double image is coming from there, it would jam the paper because the timing is off.
Anyway you need to eliminate the obvious then see what happens, I think you said you had another tonertry putting that in, if it doesn't work then change the gear for the correct one.

try precisionroller.com

dont. the whole machine has to be taken apart. not worth the time and the fuser is 85.00 wholesale.

Either the laser unit is dirty or blocked. Or the drum cartridge.

I also have a unit that makes noise and I was told by "Verdie" to try replacing the fuser. I have no idea even where to start... full detailed instructions would be greatly appreciated. I am a computer Tech and fax repair is new to me.

change out the fuser unit!

if this happens every time you need to replace the fuser. but there is a possibility it could be the main gear drive assembly, 9 times out of 10 it's the fuser. a gear on the fuser usually breaks a few teeth. the fuser is very easy to replace and is a part that will eventually need replacing on all printers.