Question about Nordic Track NordicTrack Treadmill, A2550

1 Answer

I have a C2050 and the treadmill will not go flat on the incline setting. It says it is 0.0 but it is not can you help me fix this problem.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

If the incline motor does move, try the calibrating process. Call ICON for step by step procedure. If it won't calibrate properly, pull off the cap that has a black wire going to the controller board. You can gently pry up with a small flat blade screwdriver. Pull out the wire with the motor sensor at the end and clean off the oil on it. It may have too much that prevents the sensor from seeing the motor movement. Last and more difficult way is to manually adjust the motor shaft position. Turn the treadmill on its side. Remove the pin and bolt that goes through the plastic belly pan. Be careful that if the deck swings about, that you don't get your hands or anything hit by it. Now you need to turn the motor shaft to a new position and reassemble and see how it sits. You may have to do this several times until you get it where you want it. Important to know: The machine will slam to the floor if you don't turn it on its side to work on it and have the motor bolt inserted when standing it upright. You would hurt yourself.

Posted on Oct 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix a NordicTrack C2050 treadmill that has abruptly stopped?


see if you can remove the motor hood and look at the drive belt. it is a little belt from the motor to the front pulley to turn the walking belt. its either broke or fell off

Oct 21, 2014 | Nordic Track Nordictrack C2050 Treadmill...

1 Answer

Sportsart treadmill error 7


Treadmill Parts for SportsArt Belts Motor Brushes SPORTSMITH net
ERR7 Definition: The display board main IC didn't receive the incline variable resistor (VR) value, or the value exceeds the set range. Explanation: The incline VR voltage changes as the incline motor operates, and the display board CPU uses the VR voltage to calculate the incline position. Without this value, the CPU cannot instruct the incline motor what to do, so ERR? appears. Or when the incline set is out of alignment, the VR value exceeds the set range.

The following is a list of possible solutions:

1. Incline Set a) Inspect whether the Incline ERR LED on the drive board lights. This LED indicates that the incline set has exceeded the range. b) Inspect whether the incline set mechanically exceeds range. On DC incline motors, at the 0% position, the line on the thin incline pipe will not align with the end of the thick pipe. On AC motors, at the 0% position, the red line will not appear even with the bottom of the incline window in the incline set. See Incline Troubleshooting Manual for details. c) Inspect whether the incline VR voltage exceeds the range: Put multimeter probes on the incline VR set blue and green wire connectors, while keeping the wires connected. Refer to Incline Troubleshooting Manual for the voltage range for your treadmill. If the incline range is exceeded, either mechanically or electronically, calibrate the incline set. Refer to the Incline Calibration in the Incline Troubleshooting Manual for directions. If the incline set cannot be calibrated electronically, replace the incline VA. If the incline set is stuck and cannot be unstuck, replace the whole incline set. 2. Drive Board Inspect incline voltage on the blue and green wires at the drive board. If voltage is within range, and ERRl appears, inspect drive board component connections and components for wear. 3. Ribbon Cable Inspect ribbon cable for breaks. Inspect connections at the display and drive boards. 4. Display Board Inspect IC connections. Push down to secure connections. Re-insert les.


Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

Feb 04, 2014 | Exercise & Fitness

1 Answer

Error code 660 & 595


Ray here, I had the same codes Icon couldn't ID them, new motor, then motor control board was troubleshot by me & my tech guy has never been the same, if it's a commercial grade unit, it starts wth a C, the motors have a lifetime warranty, so don't buy one, 9 out of 10 times it's the MCB ">

Oct 15, 2013 | Nordic Track Nordictrack C2050 Treadmill...

1 Answer

Treadmill incline


RUN the software calibration for easy diagnostic, and fix it. Go to THE HOOD cover for the motor and follow the steps or use the owner manual.
God bless you

Sep 30, 2013 | Exercise & Fitness

1 Answer

Sportsart 3000 treadmill problems


ERR7 Definition: The display board main IC didn't receive the incline variable resistor (VR) value, or the value exceeds the set range. Explanation: The incline VR voltage changes as the incline motor operates, and the display board CPU uses the VR voltage to calculate the incline position. Without this value, the CPU cannot instruct the incline motor what to do, so ERR? appears. Or when the incline set is out of alignment, the VR value exceeds the set range.

The following is a list of possible solutions:

1. Incline Set a) Inspect whether the Incline ERR LED on the drive board lights. This LED indicates that the incline set has exceeded the range. b) Inspect whether the incline set mechanically exceeds range. On DC incline motors, at the 0% position, the line on the thin incline pipe will not align with the end of the thick pipe. On AC motors, at the 0% position, the red line will not appear even with the bottom of the incline window in the incline set. See Incline Troubleshooting Manual for details. c) Inspect whether the incline VR voltage exceeds the range: Put multimeter probes on the incline VR set blue and green wire connectors, while keeping the wires connected. Refer to Incline Troubleshooting Manual for the voltage range for your treadmill. If the incline range is exceeded, either mechanically or electronically, calibrate the incline set. Refer to the Incline Calibration in the Incline Troubleshooting Manual for directions. If the incline set cannot be calibrated electronically, replace the incline VA. If the incline set is stuck and cannot be unstuck, replace the whole incline set. 2. Drive Board Inspect incline voltage on the blue and green wires at the drive board. If voltage is within range, and ERRl appears, inspect drive board component connections and components for wear. 3. Ribbon Cable Inspect ribbon cable for breaks. Inspect connections at the display and drive boards. 4. Display Board Inspect IC connections. Push down to secure connections. Re-insert les.

Treadmill Parts for SportsArt Belts Motor Brushes SPORTSMITH net

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

Mar 25, 2013 | Sportsart Exercise & Fitness

2 Answers

E7 error message


see this steps and fix it. God bless you

ERROR CODE # 7

E7- 1) Alternative Elevation Motor

1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection

2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate

3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation

4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor



2)Alternative:

Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet

c) Cause: Line Cord Damaged Solution: Replace Line Cord

d)Cause: Fuse Solution: Check Fuse on MCB

11_27_2012_11_30_01_pm.gif

Nov 27, 2012 | Exercise & Fitness

1 Answer

I have a series 7 Bowflex treadmill. Though the incline reads 0, it is still somewhat inclined. We can raise the incline but it will not go flat. This prevents us from folding it up as well as using it...


There will be some faulty in the transformer and controller board:
Watch this videos and tips:
http://www.youtube.com/watch?v=TquYcOzGIw4&feature=related
http://www.youtube.com/watch?v=9G4MZh8JO2Q
http://www.youtube.com/watch?v=M7qJrRbdfBc
http://www.youtube.com/watch?v=MIIxoPtvhy8hthttp://www.fixya.com/support/r10724803-measure_voltage_in_transforme_fitnesshttp://www.youtube.com/watch?v=bF3OyQ3HwfU&feature=relatedIf need further assistance, reach me, sincerely.



Nov 13, 2011 | Bowflex Series 7 Treadmill Msrp 199999

1 Answer

How to activate my ifit


I will try to help you, the feature of software is the same. you can do it, activate your ifit. Nordic Track C2050 ACTIVATE IFIT -The Nordic Track C2050 is a treadmill that was targeted toward the budget-minded fitness enthusiast. It is a model of treadmill that is no longer being manufactured by the company. When it was still being manufactured, it developed a reputation for being an entry-level treadmill that featured a console that was easy to read because of its brightness. 1. Incline Change

o The Nordic Track C2050 allows users to change the incline of the treadmill with a simple touch of a button. This treadmill features both increase and decrease buttons for the incline. The incline of the machine will change by .5 percent every time the buttons are pressed. With each press on the incline buttons, the machine will take a moment to actually reach the incline setting that was just selected.
Capacity of Weight

o Users who are larger than or weigh more than the average person will be pleased with the added capacity of weight that the Nordic Track C2050 allows. Unlike most treadmills in its economy class that only allow a weight limit of 200 to 250 pounds, this model lets users who weigh as much as 300 pounds use the machine safely. Larger people can get the benefits of a cardiovascular workout on this treadmill without worrying about damaging it.
Heart Rate Measurement

o This Nordic Track model allows users to measure their heart rate. All the machine requires is for users to place their feet on its foot rails and grasp the metal contacts with their hands. The Nordic Track C2050 then works to determine your pulse, and the symbol of a heart will eventually show up in the display. After a couple of dashes show up, your heart rate will be displayed. Users who want to be certain of getting an accurate reading should ensure their hands are clean when gripping the metal contacts.


sincerely. God bless you.


E.CUADRA

MANAGUA, NICARAGUA. C.A.

Oct 22, 2011 | Nordic Track NordicTrack Treadmill, A2550

Not finding what you are looking for?
Nordic Track NordicTrack Treadmill, A2550 Logo

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nordic Track Exercise & Fitness Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Nordic Track Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...