Question about M-Audio Delta 1010 PCI CARD Sound Editing & Recording Sound Card

1 Answer

No sound from output 3/4

Hello,
my sound card only has sound out of the first audio output to my monitor speakers. I want to use another output for headphones. How do i get sound out of both outputs at the same time?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 36 Answers

Hi
u can try this , please update the driver update for the same issue and update the driver for the sound device or please unistall and reinstalle the sound drivers on the system, or do systemrestore if it was working some days back .... check the

  1. Click Start , Run , and enter services.msc into the Open field. A services window opens.
  2. Scroll down the list of services and find Windows Audio.
  3. Right-click Windows Audio and select Properties .
  4. Select Automatic from the Startup type dropdown list, and click Start to start the audio service.
  5. Click OK and test for sound.

Posted on May 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, my name is jimmy. I have just had a problem with my 1212m pci card. There is no signal coming out of the two 1/4inch jacks, even though there is signal showing in the patch mix programe. It was all...


Are you using a PC? If so check to make sure you have no "conflicts" going on in your system. Default the patch mix, the re assign the default audio devices in your system settings and try again with the patch mix and monitors. Unplugging normal jacks/xlrs should not cause this to happen. Just a fluke it happened at the same time.
I would check for any software/firmware updates too

Jan 06, 2011 | E-Mu 1212M Sound Card

4 Answers

Maudio 192 output


You need the plug/cable that inputs to your mixing desk and outputs from your sound card.

Sep 09, 2008 | M-Audio Audiophile 192 Sound Card

2 Answers

At a time only two speaker works out of 4


1. Open Control Panel > Sounds and Audio Devices. 2. Click 'Advanced' Button near the bottom. 9d7466a.jpg
3. Select proper sound system (Quadrophonic or surround sound) according to your speaker system.fc6ac4d.jpg 4. Click 'OK'. 5. Also check volume. 6. Double-click Volume icon in taskbar. 7. Click Options > Properties (From menu) and select 'Playback'. 8. Select all Audio components. 9. Click 'OK' 10. Increase all the volumes.
Now try playing a sound. Good Luck!

Jul 30, 2009 | Audio Cards

1 Answer

Bose Companion 3 and Realtek HD Audio Card


i think your spund drivers are not updated as per your requirement and they are not working properly....
secondally it might b a problem in your volume controler or audio pin

Feb 22, 2009 | Creative Labs Audio Cards

2 Answers

TASCAM US-122 OUTPUT, WHAT SPEAKERS TO USE?


You simply need a cable that converts this rca output to a Jack output.

Here's a link I think is right, though to make sure we would need more info about your model of soundcard:

http://www.kabeltje.com/audio-jack-tulp-c-54.html

I hope this helps,
Yannick

Feb 17, 2009 | Tascam US-122 Sound Card

1 Answer

Connect Creative 5.1 A500 speaker system to Phillips DVD 3256


moz-screenshot.jpg 2d65f17.jpg
Just buy two connectors(shown above). Its having two holes upside.
1. Connect the connector to one hole of the other.
2. Connect the audio cable to the dvd.
3. Then connect the connectors to the other side of the audio cable.
4. Lastly, connect the three stereo output cables of the Creative speakers to the three holes of the connector simultaneously.
I have tried this at home with my Creative Inspire M5300 speakers and philips dvd. All the five speakers are working.
--------------------------------
Rovan C

Jan 29, 2009 | Creative Labs Sound Blaster Live! 5.1...

1 Answer

Hooking up speakers to MacPro


goto straight to the aja card if its final cut pro compatable and upto date.   Look for studio monitors, a good brand for instance yamaha hs80m 8inches that have built in amp other wise you'll need an amp generally for studio monitors.

Jan 25, 2009 | Audio Cards

1 Answer

How to connect 5.1 speakers to a notebook


yes it will :) if it has 6 female ports (the normal 3 + 3 extra) it will work just fine :)

Jan 07, 2009 | Creative Labs Sound Blaster Live! 24-bit...

1 Answer

No Windows Media Player Audio from Surround channels


On WMP - go to Tools > Options > Devices > Select Speakers > click Properties > Audio Device to Use - ensure you select your audio Card (Not direct sound - just a precaution) > Advanced > Volume Tab > Speaker settings click on Advanced > Select the type of Speakers you have. - Hope this helps, let me know!

Oct 28, 2008 | Creative Labs Audigy 4 Sound Card

1 Answer

Terratec phase 22 problems with getting stereo sound


You must make stereo cable (adapter), from 2 mono outputs to 1 stereo.

Jun 16, 2008 | TerraTec Electronic PHASE 22 Sound Card

Not finding what you are looking for?
M-Audio Delta 1010 PCI CARD Sound Editing & Recording Sound Card Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top M-Audio Audio Cards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Are you a M-Audio Audio Card Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...