Question about Clarion VRX935VD Car DVD Player

1 Answer

ERROR CODE 6

IT SAYS THAT THE ERROR IS THAT THE DISK WAS INSERTED UPSIDE DOWN AND TO EJECT IT AND RE-INSERT IT AND IT WILL FIR THE PROBLEM BUT THAT DOESNT WORK! ANY IDEAS HOW TO FIX THIS PROBLEM?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem with my 925, and when I shipped it to clarion for repair, they told me that the dvd drive is shot... They quoted me a price of $700 to repair. I've been trying to find a dvd drive that I can put in myself, but haven't had much luck as of yet. Sorry to say that it sounds like you've got bad news there.

Posted on Jun 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot eject upside down DVD


There should be a small hole somewhere in the front of the player on or very close to the door. This is an "emergency" door latch.

If you straighten out a paper clip, you can (WITH THE POWER OFF) insert the end of the paper clip into the hole. Just inside the hole, you will feel the clip stop (about 1/2 inch). press slightly on the paper clip, and you will over ride the door latch.

If you have any doubts about doing this, contact the manufacturer first.

Joe

Dec 26, 2009 | Delphi Car Video Players

2 Answers

Mecha error


Otherwise known as a mechanical error. The CD will not eject/insert without assistance. I have found a workaround for this, but have yet to fix it. If you take another CD and hold it inside the CD slot just beneath the ejecting CD, it will help to guide the CD out of the track. I also have to use a similar method to push the disc into the track as well.

Aug 14, 2009 | Kenwood DDX-6019 Car DVD Player

1 Answer

E1 Error on Panasonic CQ-C1110W Car CD Player


If you receive an error reading or the cd ejects automatically briefly after being inserted, the headunit needs to be repaired or replaced

Jul 01, 2008 | Panasonic CQ-VD7001U Car DVD Player

4 Answers

Carrozzeria avic drv 250 problem


check out bootdisc.ru

I have the drv-250 and download the disk from here....works perfectly now

Jun 21, 2008 | Pioneer AVIC-N2 Car DVD Player

2 Answers

AVIC-N1 wont read navigation disc


If your error message is reading "insert appropriate disk" or "inappropriate disk inserted" than I have the solution. Can you just let me know exactly what the message is?

Jun 05, 2008 | Pioneer AVIC-N1 Car DVD Player

1 Answer

Is there a way to "reset" the memory


This is the total reset process step by step i found it on
www.avicx1forums.com and it worked fine.



REMOVE DISK

HOLD RESET AND EJECT
RELEASE RESET BUT HOLD EJECT
SCREEN WILL GO BACK IN AND OUT-THEN SAYS PLEASE PRESS THE RESET BUTTON…DON’T
THEN WITH JOY PAD PRESS …
UP,RIGHT,UP,RIGHT,DOWN,RIGHT,DOWN,RIGHT…THEN OK (JOYPAD BUTTON INWARDS)
PASSWORD SCREEN WILL COME ON SCREEN BREIFLY
TEST MODE SCREEN APEARS-CLICK JOYSTICK TO RIGHT ONCE
SCROLL DOWN TO NUMBER 6-PROGRAM FORCED WRITE (OK)
FIND NUMBER 1 SYSTEM PROGRAM (INSERT DISK --CNDV 40/50/60?)
PRESS 1 SYSTEM PROGRAM (OK)
SELECT 2 DVD/CD ROM (OK)
SELECT LANGUAGE… (ENGLISH)
PRESS (VIEW –POS) BUTTON
SHOULD SEE SYSTEM PROGRAM GOING UP IN %

WHEN FINISHED PRESS (BACK)
FIND NUMBER 6 PROGRAM FORCED WRITE AGAIN (OK)
NUMBER 3 APPLICATION PROGRAM (OK)
SELECT 2 DVD/CD ROM (OK)
SELECT 1 UK ENGLISH...THEN PRESS (VIEW – POS) BUTTON
SHOULD SEE SYSTEM GOING UP IN %

WHEN FINISHED PRESS (BACK)
TEST MODE PAGE 1
SELECT 6 - CLEAR BACK UP MEMORY (OK)
SHOULD SAY FINISHED THEN ASKS FOR RESET BUTTON TO BE PRESSED
PRESS RESET ON FRONT OF UNIT

START SAT NAV AGAIN

ASKES FOR LANGUAGE PRESS NO (READ TEXT)
SYSTEM STARTS


BUTTONS

OK = JOYPAD INWARD
BACK = JOYPAD TO THE LEFT…NOTE THIS WILL BRING YOU BACK TO PREVIOUS PAGE
BACK = BAND BUTTON ….NOTE THIS WILL TAKE YOU BACK TO THE MAIN MENU

May 09, 2008 | Pioneer AVIC-N1 In-Dash DVD Multimedia AV...

1 Answer

Dvd disk won't eject???


this is device do not play dvd-video, onli dvd-rom with maps for gps-navigation.

Apr 28, 2008 | Eclipse AVN5495 Car DVD Player

1 Answer

Dvd dose not play


1. Insert any disc
2. Press Eject on remote (Once you eject, don’t pull the disc out)
3. Press DVD Setup on remote
4. Press 8800 on remote
5. Press DVD Setup on remote
6. Press Angle on remote
7. Region code number (0 : free, 1 : USA, 2: Europe)
8. Press (Skip Fwd) on remote.

Apr 20, 2008 | Blaupunkt IVOD-1022 Overhead LCD Monitor...

1 Answer

Directions are off and the alert comes too late


This is the total reset process step by step i found it on
www.avicx1forums.com and it worked fine.



REMOVE DISK

HOLD RESET AND EJECT
RELEASE RESET BUT HOLD EJECT
SCREEN WILL GO BACK IN AND OUT-THEN SAYS PLEASE PRESS THE RESET BUTTON…DON’T
THEN WITH JOY PAD PRESS …
UP,RIGHT,UP,RIGHT,DOWN,RIGHT,DOWN,RIGHT…THEN OK (JOYPAD BUTTON INWARDS)
PASSWORD SCREEN WILL COME ON SCREEN BREIFLY
TEST MODE SCREEN APEARS-CLICK JOYSTICK TO RIGHT ONCE
SCROLL DOWN TO NUMBER 6-PROGRAM FORCED WRITE (OK)
FIND NUMBER 1 SYSTEM PROGRAM (INSERT DISK --CNDV 40/50/60?)
PRESS 1 SYSTEM PROGRAM (OK)
SELECT 2 DVD/CD ROM (OK)
SELECT LANGUAGE… (ENGLISH)
PRESS (VIEW –POS) BUTTON
SHOULD SEE SYSTEM PROGRAM GOING UP IN %

WHEN FINISHED PRESS (BACK)
FIND NUMBER 6 PROGRAM FORCED WRITE AGAIN (OK)
NUMBER 3 APPLICATION PROGRAM (OK)
SELECT 2 DVD/CD ROM (OK)
SELECT 1 UK ENGLISH...THEN PRESS (VIEW – POS) BUTTON
SHOULD SEE SYSTEM GOING UP IN %

WHEN FINISHED PRESS (BACK)
TEST MODE PAGE 1
SELECT 6 - CLEAR BACK UP MEMORY (OK)
SHOULD SAY FINISHED THEN ASKS FOR RESET BUTTON TO BE PRESSED
PRESS RESET ON FRONT OF UNIT

START SAT NAV AGAIN

ASKES FOR LANGUAGE PRESS NO (READ TEXT)
SYSTEM STARTS


BUTTONS

OK = JOYPAD INWARD
BACK = JOYPAD TO THE LEFT…NOTE THIS WILL BRING YOU BACK TO PREVIOUS PAGE
BACK = BAND BUTTON ….NOTE THIS WILL TAKE YOU BACK TO THE MAIN MENU

Aug 28, 2007 | Pioneer AVIC-N1 In-Dash DVD Multimedia AV...

1 Answer

No audio, and error 6


Okay, I'll throw out the "is the disc upside down???" question...

If not, and you are using a regular store bought CD or DVD ( I think I've seen error 6 when using some homemade discs)then maybe the player's lens needs cleaning. There are DVD/CD lens cleaners out there. See if that helps. Maybe pressing the reset button if nothing else helps?

Mar 08, 2007 | Clarion (VRX765VD) Car DVD Player

Not finding what you are looking for?
Clarion VRX935VD Car DVD Player Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Clarion Car Video Players Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Larry Spears
Larry Spears

Level 3 Expert

625 Answers

Are you a Clarion Car Video Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...