Question about Peavey 32fx USB 32 Channel Mixer

1 Answer

Hai iam from india my name is logu i have problem in my 24 fx mixer the display is not working and control fadder failing one by one now 13 fadder not working please give me a suggestion as soonas possible

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Peavey Master
  • 5,603 Answers

I don't know if you have a product there that is available here in Home Depot stores.
If you can find CRC226, using the spout put a small amount in your faders through the slot, including the dead ones. Do NOT use any product like DeOxit as it will wreck the faders as will WD40. Find CRC226 (there are other CRC products so make sure to get the right one) in the electrical department of Home Depot stores.

Posted on Sep 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i connect a monitor to the 1202FX mixer


Hi, you can use the Control Room outputs to give you an additional output with it's own level control but of you want a separate "mix" rather that overall level you could try the FX send & use the FX controls per channel to set the mix - depends how / if you are using the FX of course! - Else upgrade to a mixer with 2 Aux sends - use one for FX & the other for monitor :-) e.g. some of the Alesis do this! 'Good Luck!

Dec 21, 2014 | Behringer Xenyx 1202fx Mixer 12 Input 2...

1 Answer

I have a behringer eurorack ub1204fx hooked up to a bose L1. I can't seem to get the reverb to work


you have to set three gain controls to pass the FX into the mix. The FX send gain for each input channel, the FX fader which sends the FX mix to the effects unit, and finaly the gain that sends the FX output to the mix. Depending on which effect you choose, some are very subtle.

Aug 06, 2011 | Behringer Pmp3000 16 Channel Audio Mixer

1 Answer

I NEED A SERVICE MANUAL FX 24 MIXER PEAVEY


I believe the manual you are looking for can be found here: http://www.manualnguide.com/manual-get/4220/

May 04, 2011 | Peavey 16FX 16 Channel Mixer

1 Answer

2442FX. When the mixer is switched on the numerical displays on the twin digital FX units flash and the FX units don't work.


The flashing means the FX hasn't been activated yet. Dial up the number you want THEN push DOWN on the knob to activate and the flashing stops and the FX takes effect.

Mar 29, 2011 | Behringer XENYX 2442FX Mixer

1 Answer

I have the PMP1680S and the vocal effects do not work, a friend researched this and found it to be a common problem with this unit, thank you


The most common problem is improper setup.

One needs to control the FX SENT to the effects unit with the FX1 and FX2 controls for each mic channel. You should see the levels on the tiny histogram alongside the effects selection dials/indicators. Next select the effect number you want so it is displayed in the window. Then PUSH in on the selector for each of the two effects to activate the selected effect. Now, lastly advance the FX to MAIN knobs to control the amount sent to the main mix. Some of the effects are subtle so try different ones.

Mar 26, 2011 | Behringer Pmp3000 16 Channel Audio Mixer

1 Answer

HELLO, I HAVE A BEHRINGER PMP 3000 MIXER, AND I CANT SEEM TO GET THE FX TO WORK EVEN THOUGH I FOLLOWED THE INSTRUCTIONS IN MANUAL, IME JUST WONDERING IF THERE IS SOMETHING IME OVERLOOKING? SCINCE I KNOW...


Do the following:

Set each of the FX mix knobs to 12 o'clock (halfway up to start)... I believe they are orange tops for each channel effects are desired for.

Next select the number of effect by rotating the selection knob. The display will flash.

Push DOWN on the selection knob to activate the selected effect number... the display will cease to flash. Note that you can mute the effects with a small button in the effect area and decimal point will come on showing effect, even though selected, is disabled. That small button can toggle the effects on and off.

Next, adjust the "FX to main knob" above the MAIN fader... set it to 12 o'clock to start with.
Note that there are two others that send the resultant same effect to stage monitors if used...

Now ADVANCE the FX (orange) fader to increase the input to the FX. You should start to hear the effects... SOME of the effects are subtle, so maybe choose a long delay one to get the hang of it... choose #3 for example...

The manual is NOT too clear how to use the effects and is confusing... they assume you have knowledge common to mixers... and new users don't.

I would recommend watching several YouTube videos about mixer setup... there are some good ones there !!! Most mixers have a lot in common and once you learn what is there, you can work most any of them... some of the new digital ones are a bit more confusing.

Feb 14, 2011 | Behringer Pmp3000 16 Channel Audio Mixer

1 Answer

I have Behringer PMP 3000 2 channels not working fx not working and fan not working but unit turns on ok


Fan speed depends on temp sensors. If doesn't run at all when unit is loaded, take in for repair immediately.

If FX window changes with the control, chances are you have not set the controls properly. You need to havew THREE places turned up for effects: The FX knob in the desired channel(s), The FX slider and finally the knob to send the FX to the mains and/or monitors.

OFTEN the stereo channels aopear to not be working because of the A/B switch between the RCA and 1/4 inch jacks.

You did not give me enough info regarding which channels appear to not work.

Sep 26, 2010 | Behringer Pmp3000 16 Channel Audio Mixer

1 Answer

I have the Xenyx 2442Fx for about 6 months. I know it's still with in the warrenty period, but I have something rather strange happening to the digital fx on Aux 3. This is a bit of a long winded one but I...


This sounds like a breakdown in the digital circuits. You are seeing/hearing digital noise. This is most likely an IC that is breaking down internally. This will take some time to find/fix. Use the unit for your gig, then return it under warranty for repair. Pay close attention and note WHEN the problem occurs. If possible, try this multiple times and record any pattern to when it happens. The more detailed the "timing" the easier it will be for the repair shop to reproduce the problem and fix it.

Keep us posted.

Dan

Aug 17, 2010 | Behringer XENYX 2442FX Mixer

1 Answer

How to hook up alesis air fx to 16channel makie mixer what jack it goes into


Go to http://www.zzounds.com/item-ALEAIRFX.Under the picture you will see About This Product. Click on DOCs and you can download the manuals for it. Read the manual carefully and it is explained very well. Use your mixer manual to get the best set up. I would recommend using it in an FX loop that lets you mix the individual channels FX into the output you have hooked up to your computer.

May 17, 2009 | Alesis Music

Not finding what you are looking for?
Peavey 32fx USB 32 Channel Mixer Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peavey Music Experts

Michial Gueffroy

Level 3 Expert

1138 Answers

Ben Armstrong

Level 2 Expert

357 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Are you a Peavey Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...