An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: No Function Menu on BT-Tel mode
Disconnect from power source. Wait for a few minutes for the device to reset. Switch it on and put the DVD ROM inside and enter your destination. Once calculated, remove the DVD and check for functionality.
If you still have the same issues, the device is probably defective and its best to take in in for servicing or replacement if under warranty.
Hope that helps! Should you have any further questions,
please post them here.
If you are satisfied with my solution or have no further queries, please take a
moment to "Accept" this solution.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your stereo has 2 blue or 1 will b blue with white. One will supply power to a power antenna which will only have power on radio mode not cd do check wires with test light coming out of your head unit for the remote turn on and not power antenna
To answer your question;
You do not need to connect that wire but you need to bypass the parking brake function in the menu.
Here`s the parking brake bypass procedure:
1: Go into AM/FM mode 2: Hit "setup" on the remote control 3: Enter 543210 on the remote, listening for the beep for each numberentered 4: A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen. 5: Select Brake bypass to "ON" and hit the "X" near the bottom of the screen. 6: Use the unit wisely and above all safely. A ticket is one thing, causing a fatal accident due to negligence is another. Hope this help Cheers
Have you tried going into the menu and searching for this function?Also some car stereo's have a sub menu when the radio is turned off or in stanby mode it usually can be reached by pushing your menu button and holding for a few seconds also again the power has to be in standby mode. if this works look through menu for your problem.
Service Mode Function
MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can
be adjusted by remote control in Service Menu
How to enter SERVICE
In main menu, move to choose sound menu, set BASS to MAXIMUM, and set TREBLE to MINIMUM.
Simultaneously press " i " button on remote control and DOWN button (-/v) on the TV set.
Exit with off switch on tv.
When you next switch on TV it is as brand new giving you the option of setting pin number and user ID.
It actually sounds like you don't have your parking break wire (light green wire on wireing harness) grounded. I have an 06 F150 and the same thing happened to me when I instaled it. I had no address search and some other functions didn't work as well. Try to locate the light green wire and ground that to anything metal. Hope this helps, the install manual isn't very good at describing this.
i really hope you have a receipt from the store you purchased it. that sounds like if theres no menu functions you can access to try and enable the screen, than it probably is not a good idea to try and solve this unless your astrophyscisist