Question about MSI MS-6734-10 (-6734-010) Motherboard

1 Answer

Board will not boot.power supply changed - MSI MS-6734-10 (-6734-010) Motherboard

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 270 Answers

The power supply and motherboard have a connection (4pin) that communicate to each other. Without this connection, the board will not boot and the power supply will not come on.
The power supply can be fooled by jumping certain pins, but the motherboard must be connected.
Please consult your motherboard manual for the location of this connector.
Visit this site for more clarification please.

http://www.pcguide.com/ref/power/sup/partsMotherboard-c.html

Posted on Sep 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't get my system to boot up


The power mapping grid on the motherboard may be defective

Sep 15, 2012 | ASUS P8Z77 WS Z77 LGA 1155 ATX Intel...

1 Answer

Do not turn on I change the power supply and still doing nothing


Assume you have made the connections on the main atx plug to the motherboard AND the smaller 4 pin Black and yellow wired plug (cpu power).

If the PSU you have just installed was sure to be a good one, then the issue lies with the motherboard or the switch to the power supply on the board (2 pin wire connector labelled PW). Try to remove the connector and then bridge the connection manually with an insulated screwdriver by BRIEFLY touching the 2 pins on the board. If the switch was faulty, this will bypass it and the computer will boot.

If it still will not boot, try removing all non -essential components. leave only 1 stick of ram and the video connection. if it boots, replace each in turn and see which one causes the computer not to boot.

If that fails, examine the board carefully, look closely at the capacitors ( small cylinders) on the board if any are bulging or the top is leaking a rusty coloured crust, the board is dead and will need replacing

Mar 26, 2011 | Gateway GM5472 PC Desktop

1 Answer

My computer does not boot though it has power, does it mean that i have to change the motherboard?


it may also be your power supply unit even if the led is on on *********** board power supply may be faulty so try to find a power supply to test *********** board before replacing .

Jan 17, 2010 | Asrock K7VM3 Motherboard

2 Answers

System will not boot the motherboard gets power the green light on the mother board comes on and the hard drive has a green light that comes on there is no beep though. I fooled around with it and it...


Hi,

Remove your ram and put it back again. Sometimes this helps, otherwise check if your power supply is giving enough power to run the board and all of the components.

Hope this helps!
Please rate!

Cheers

Sep 27, 2009 | ASUS P4GE-MX Motherboard

1 Answer

E-Machine PC with only a green LED on MB on Boot attempt


Hello,

We have repaired many of these systems. The board was damaged when the power supply shorted. You can get replacement motherboards at www.barebonekit.net click on the link on the left side for motherboards and look for Emachine.

I hope this helps, if so please rate my solution.

Buddy
Corporate Computer
www.ccl-la.com

Jul 16, 2009 | Intel D845EPI (INTELKD845EPILPAK10)...

2 Answers

I have a emachine PC. PowerSupply blew up. changed it still down


Dear,

ELECTRIC SHOK OR IMPROPER EARTHING IS DAMAGE POWER SUPPLY,MOTHERBOARD,PROCESSOR,RAM
HOW TO CHECK IT.

(WHEN CHECKING KEEP CAUTION :- REMOVE HARD DISK DRIVE POWER SUPPLY SOCKET)

1. check power supply watt 400/450 and same another power supply install and check it. if power supply change and system is working ok so problem in your power supply.

2. check CMOS cell on motherboard,(3 volt)

3. Bfore power supply changing check on mother board any capasitor is like as damaged or not.
OR check main chipset ic is marked as intel.whenpower on it is very hitting or
normal)if very hitting require to repair your motherboard.(intel chipset ic near cmos cell or pci slot,)
4. checking of ram on other pc (working or not)(one beeps coming or not,if one beep coming ram is working ok)

Feb 27, 2009 | Intel D845EPI (INTELKD845EPILPAK10)...

1 Answer

L440Gx server board do not boot


1: Check wether the on/off button on your power supply is turned to on.
2: Check your cables. Try switching with those from other pc's.
3: Check wether all the connections from power supply to the mainboard/ram/video/harddisk are OK.

Hope this helps,
Yannick

Feb 18, 2009 | Intel Server Board L440GX (KMS440GXTPAK10)...

1 Answer

No Power On Start


Problem Solved, changed the power supply with a 450watt one and it booted fine .

Jan 30, 2009 | PC Chips P25G Motherboard

1 Answer

No boot or wake up


Chances are you need to change the power supply,, but first you need to check to see if its workingm this is quite easy

1.) unplug it
2.) remove the power connector from the main board
3.) on the power connector is a green wire(ONLY ONE) and right next to it is a blact wire(any black will work)
4.) use a peper clip or unisulated wire to bridge the green and black wire by inserting it into the jack contacts.
5.) plug in the power supply, if the fans spins then its working..

If the power supply is fine then you will need to check the power button connectors *wire from power button that connects to the main board),, if the connection is fine, then unjack the connectors and use a bladed screwdriver to bridge the pins for the power button connector on the main board,it should boot up. If not then you need to have that mainboard replaced

Jul 27, 2008 | EliteGroup P4M800-M7 Motherboard

1 Answer

Gt4022 boot problem


if your motherboard is getting power .try changing the boot sequence

Jul 27, 2008 | Gateway GT4022 PC Desktop

Not finding what you are looking for?
MSI MS-6734-10 (-6734-010) Motherboard Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top MSI Computers & Internet Experts

vsri9

Level 2 Expert

73 Answers

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a MSI Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...