Question about Linksys WRT300N Wireless Router

1 Answer

I lost the password and access code & CD to set up other computers to my wireless router. Is there any way of reseting it?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 177 Answers

Hi Friend,

Make sure that the wires are connected properly to the oruter and the computer. Push and hold the reset button for 30 seconds and turn off the router. Turn it on and perform the steps;

1. Type 192.168.1.1 in the web vrowser and hit enter. Leave the username blank and type admin in password,hit enter.
2. In the setup page, if you have cable connection, make sure Automatic DHCP configuration is selected. If you have DSL connection, select PPPoE from the menu and enter the username and password. Click Save settings.
3.Click Wireless and fill as mention:
Wireless Network Mode:Mixed
Wireless Network Name:As per your choice
Radio band: Wide
Wide Channel;3
Standard Channel:1-2.41GHz
SSID Broadcast:Enabled. Click Save settings

4.Click Wireless security and fill as mention:
Security Mode-WPA personal
Pre-shared key-Enter 10 digit password(e.g-your 10 digit telephone number) and click Save Settings

I hope this will resolve the issue.

Regards
Chiranjeet

Posted on Sep 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost password for belkin router


To reset the Belkin back to the default settings -
Press and hold the pinhole RESET button at the back of the router and then power for at least 15 secs. Then release the RESET button.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Dec 30, 2012 | Belkin Basic Wireless Router

1 Answer

What is facotry user & password to set up wireless


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Sep 15, 2011 | Linksys Computers & Internet

1 Answer

I have lost the CD for my Belkin Surf wireless modem-router, and cannot install any wireless capabilities in my house.


You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Aug 22, 2011 | Computers & Internet

1 Answer

I have lost my network key password. Do I have to reset the whole system again ? Can I locate it on my computer ?


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Feb 10, 2011 | Buffalo Technology AirStation G54...

1 Answer

I have lost the installation cd to my linksys router and I need software to change the wep password. I cant seem to remember what I have set it to before.


You can know your password without disk too. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Oct 06, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

I lost my password and lost the WGT624 installation CD, how can i get the router to work on a new laptop


If you have lost the password to access the router page then you have to reset the router

Ensure that you have all the details regarding your internet connection before resetting the router

If you reset the router you can run the smart setup wizard and get connected by entering correct information in all the pages of the wizard

If you are looking for the wireless password:
--------------------------------------------------------------
Access your router page ( Open Internet Explorer --> Type 192.168.1.1 and enter it--> Login name(default)-admin, Password(default)-password) --> GO to wireless settings,under Wireless settings you will find the wireless password.

Jan 17, 2010 | NetGear WGT624 Wireless Router

1 Answer

Reset router and add a new netkey . I have a Router G MIMO Plus. Model F5D9230-4. I move my office and I lost manuals and CD installation. We also change computer so we forgot the netkey. How can we reset...


You can secure your wireless network wit WEP or WAP code.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.0.1
or
http://192.168.1.1
For belkin router http://192.168.15.1
or
http://192.168.2.1

If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on wireless settings then enable WEP Security then add WEP code .It is your password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
Thanks for using FixYa.

Dec 10, 2009 | Belkin (F5D9230-4) Wireless Router...

3 Answers

How do i install my WIRELESS G ROUTER without the cd


you don't need to install a router on a PC. The wireless card or ethernet cable should talk to the router.

Sep 21, 2009 | D-Link DIR-300 Wireless Router

2 Answers

Lost pasword for linksys wrg54s


User the reset button on the bottom of the router to reset it to factory defaults

Jun 17, 2009 | Linksys Wireless-G WRT54GS Router...

Not finding what you are looking for?
Linksys WRT300N Wireless Router Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...