Question about Lexmark X1270 All-In-One InkJet Printer

1 Answer

Connecting to printer

I have connected all the cables properly. Installation is complete on my laptop comes to the crunch when printing off then says I have to recheck my cables or restart the computer which I have done HELP!!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Uninstall the software and reinstall it and read all options carefully.

Posted on Jun 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to install a printer on laptop?


If you don't have the original installation disc, look at the brand and version of your printer. Go to the main website for the manufacturer and search for the version of your printer. There should be a download available. Download this to your laptop. Use a USB cable or the cable that comes with the printer and plug it into your computer and the back of the printer. After you've done this, run the installation software on your laptop and follow the instructions. Unplug when the installation is complete, or if you have wifi and the printer is compatible, follow the instructions to also connect it for wireless printing.

Oct 31, 2014 | Printers & Copiers

1 Answer

Myhpj4680 printer wont stop printing the same thing over over over


What print it is?. >Might be askew codes are printing. remove usb cable, cancel all the pending documents, un install the drivers. Once system cleared every thing restart the system,load printer drivers with original cd..when system asked to connect the printer.. Switch off the printer wait couple of minutes..connect the usb cable.. complete the drivers installation..check for print..

Jan 31, 2012 | HP Printers & Copiers

2 Answers

How do i connect my laptop to my printer so i can print things of my laptop


I will try to guess that you want your printer connected to your laptop as wireless.
-first you need to prepare all the things needed and make sure that you connected/installed the cartridges and you have located the port where your power cable needs to plug-in.
-2nd I hope your laptop does have an optical drive (CD/DVD drive).
-on the package of your printer there should be a drivers disk.
-you need to enter the drivers disk on the optical drive then just let it run.
-when you have the GUI of the driver there is an option to install everything.
-make sure that you did not connect your USB cable to the laptop if theres any.
-when running the driver it will come to a point where it will ask you to connect the printer (USB, Network, Wireless)
-if you have the USB cable, use that cable first to connect after you turn on the printer.
-later after the installation was completed, run the disk again then there should be an option to convert the connection from wired to wireless.
-if you dont have the USB cable comeback to me then I will give the the steps to connect it using wireless connection.

Apr 10, 2011 | HP DeskJet F380 All-In-One Printer

1 Answer

Installing HP4795 printers in Windows XP. During install XP cannot find print drivers. Can you tell me how to point install to the print drivers?


Hi,

Click on the link below to download the Printer Drivers and later install them.
Download Link

After you download the file, run the file to start installation and complete the installation.
Disconnect the Printer cable before the installation starts and connect it when asked to.
If for any reasons, it does not recognize the printer connected, complete the installation by clicking on the option ( I will connect the printer later ) and complete the installation.
Then Click on the Diagnostic download option below to run the diagnostic tool to diagnose the issue.

HP Print Diagnostic Tool

My Suggestion would be to completely uninstall the software and reinstall it using the Download Drivers option above in this solution.


Thank you for contacting FixYa

Regards,
Ron

Dec 23, 2010 | HP C4795 AllInOne InkJet Printer

1 Answer

We have giant company & having CANON LBP 2900.Whenever i am going give print it,s not printed .message shown ready to print but error occuring please help


try checking the printer if it is installed properly, by going to the printers and faxes folder, right click lbp2900 and check its properties, verify if the port used is correct. check printer if it is online and also the usb connection. if everything is ok, try replacing the usb cable. if after replacing the cable and the printer still doesn't print, uninstall it and remove the connection. Restart the computer and begin installation, do not connect the printer unless the system prompt you to do so. Run test print after the installation.

Jun 22, 2010 | Canon LASER SHOT LBP-2900 Printer

3 Answers

Printer is not print properly


hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
237c944.jpg

http://www.hp.com/printer/prob676ijt65/solution

aswq3

Aug 28, 2009 | HP Officejet 5610 All-In-One InkJet...

2 Answers

Hp printer wont print through print server


Share printer option needs to be turned on
Realize that the scan option only funtions on local connection

Aug 11, 2009 | HP PhotoSmart C4480 All-in-One Printer ...

1 Answer

Is the Pixma MX310 compatible with Apple's Airport Extreme?


Try to check your cable connection maybe its properly inserted in your port. If it continues to appear try reinstalling your printer. When installing follow the steps in the installation. Disconnect the usb cable to the PC prior to installation. You will be ask to attached it to the PC during installation before completing the installation. Check also your network settings maybe some plug ins are disconnected. After installation it needs also to restart the pc so that new changes of the settings will be detected.
Please rate this solution so that I will have more bases to suggest if you will elaborate on the result.

thank you.

Nov 28, 2008 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Installed with enclosed disc


Looking at the setup guide, it does indeed tell you to not connect the usb cable until prompted by the software. It is Step 7.

Here a link to the setup guide:

Kodak 5100 AIO Setup

Kodak Support has step-by-step instructions for uninstalling and reinstalling the software. Just make sure you remove the USB cable from the computer and reboot before you reinstall.

Here is the support page to begin on:

Kodak Support 5100 Reinstall

Comment back to let me know how it went.

Nov 13, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

Not finding what you are looking for?
Lexmark X1270 All-In-One InkJet Printer Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...