I am trying to install a SN9C103 webcam on my Windows Vista laptop but when I insert the disc, it tells me there is no disc inserted. Therefore, is there another way I can install the webcam? I will be grateful for your help

A solution to that is to install Windows Vista Ultimate on top of your old vista installation. Just insert your Vista DVD and restart your computer. And simply follow the instructions for the installation.

If you place your Win7 disk in the DVD drive boot the laptop from the disk and choose to install a new system.
Follow the menu and prompts.
When it has installed download the drivers from Acer.com otherwise you will get problems.
Hope that helps.

its probably because the disc or the disc drive is not working properly....please check it and try again.......if possible burn a new copy of the disc and try it...

Axis & Allies is designed to be used with Operating System: Windows 98/SE/Me/2000/XP, therefore I'd suggest to run your Axis & Allies in Vista using Compatibiliity Mode --> Right click on the program icon--> properties-->Compatibility--> select one of the versions above

Do you know what model # the webcam is ??



This Driver is the most popularly used for Mikomi Webcams & should work

• Mikomi Webcam Driver SN9C103 for WINDOWS
• Mikomi Webcam Driver SN9C103 for MAC

There are currently no windows vista drivers available for your webcam.

I tried to install the sonix driver post here, but it doesn't work.
It work perfect whit the Trust driver.
The 32Bit version driver of webcam Trust WB-3400T work well.

Ceck this link:
http://forums.cnet.com/5208-6142_102-0.html?forumID=67&threadID=282364&messageID=2694940

http://www.trust.com/products/product_detail.aspx?item=14383&section=drivers

good Luck!

hi i lost my cd for my webcam SN9C103 Video/Audio Single-Chip Processor (Webcam) can u help me too get it back up and runnin

http://members.driverguide.com/driver/detail.php?driverid=1006906

Driver Guide claims this driver works with all versions of windows. Let me know if it does.

http://www.jascoproducts.com/cgi-local/SoftCart.exe/online-store/scstore/pro/vista_ready_list.html?E+scstore On this page near the bottom they claim that easycam will not be supported for vista - a lot of companies have decided to just add vista to their new products - I had no luck at all with GE but you might find that in a few months or so someone out there has figured out how to do it - keep searching. Sorry no solution, but I hope it helps anyway :)