Question about Televison & Video

1 Answer

Technika 151-700 no picture no sound 2 sec. raster at switch on.

Posted by on

  • bigivie38 Sep 27, 2010

    Hi, many thanks for your help ginko ,The prob. was the PSU, which I had found just before you replied .But thats OK.Kind regards Ivie.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Hi.

It is probably a defective power supply or a defective inverter, parts must be tested before replacement. General testing procedure explained here: test of PSU, main controller and inverter.

Note:boards and spares for Technica TV are difficult to find, this TVs are often fixed at component level. Here a seller .

Posted on Sep 27, 2010

  • Ginko
    Ginko Sep 27, 2010

    Hi Ivie.

    Thanks for the feedback.

    Have a good day.

    Ginko.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Denon AVR - 2807 flickers in TV mode with picture & sound.


Change the hdmi cable and try. If not then you have an hdmi fault module.

Dec 15, 2013 | Denon AVR-2807 Receiver

1 Answer

Toshiba CZ32V61 no picture


1) you have problem with the Raster
2) the main causes are a) raster b) picture c) sound d) synch
3) since this are not video, the problem is raster. your must
test the voltage from section horizontal out +125vdc+vertical output +80v+all other circuit +12vdc
4) test the power supply for defective. see the diagram attached

7_13_2012_10_30_34_am.png

Jul 12, 2012 | Toshiba CZ32V61 32" TV

1 Answer

KP-61HS30 has sound but no video


1) the problem you have is lack of raster , the problem in tv has 4 phase 1) raster 2) picture 3) synch 4) sound.
2) test the power supply , check the horizontal output +125vdc ,vertical output from +80vdc, +al other circuit +12vdc, if there are missing fix it, see the diagram attached.
3) TEST the signal from tuner,i-f, detector, AGC
GOD BLESS YOU
7_13_2012_10_41_28_am.gif

Jul 12, 2012 | Televison & Video

1 Answer

I have a Technika 32" LCD TV . when switching it


Check the connections??? Maybe get it replaced or repaired.

Jun 05, 2011 | Televison & Video

1 Answer

Picture rasterization


It sounds like the LCD controller board problem, usually if you cool it down the problem will go away, and comes back when it heats up again.

Nov 23, 2009 | Syntax-Brillian Olevia 242TFHD 42 in. LCD...

1 Answer

42 lg lcd no sound but picture on for about 2 sec and then still?


I would call LG and have them assist you with a repair. The most helpful number is 877-543-8325. It doesn't matter if you are in or out of warranty.

Dec 09, 2008 | LG 42LC2D 42 in. LCD HDTV

1 Answer

POWERS DOWN AFTER 4 SEC


crt beam current too high causing shutdown as you know. Check cathode voltage of each cathode, normal levels depend on picture is around 130-150V. Missing 200V to crt board. Screen voltage problem normal 300-500V. Flyback or bad crt. ABL circuit problem. Jungle IC.

Oct 29, 2007 | Philips Magnavox TP3285C 32" TV

1 Answer

NO PICTURE


do you see anything on screen.no picture doesnt mean no raster ,raster mean anything that comes out in display.no raster with sound only mean failure in either,connection in heater which means, loose connection or some new sets declare failure in vertical circuit.so be more specific ok?

May 08, 2007 | Sony FD Trinitron WEGA XBRKV-40XBR800 40"...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...