Question about Belkin (F5D7230-4) Router (587009)

1 Answer

Can't go online from Main Compter after Installation

After setting up my Belkins FSD7230-4 using the provided CD instructions everything looks great according to the instructions. Lights on, network activity flashing on both cable modem and router, software says I have a network connection but I can't logon to the internet from my main computer. I'm plugged in correctly from modem to router to computer.

I called Belkins. This was months ago. They gave me a bunch of IPs and other settings to check which were ok. They didn't seem to know what was going on. I also put in a password but I assume that only applies when logging on from a remote PC and doesn't affect the main desktop PC.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 187 Answers

Does your router tell you it has an internet connection? (you can check this from the routers status page on it's web interface). If not, unplug the router and modem, then plug in the modem (wait approx 10 seconds). Once the modems status lights are static, plug in the router, and check the internet connection.

Posted on May 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i connect this router to my cable modem i dont have any drivers for it


If you are looking for any firmware drivers for the Linksys WRT160N Wireless Router you can find them on this page link: http://www.linksysbycisco.com/LATAM/en/support/WRT160N
However, I am not sure you need drivers for the router if you want to hook it up to your cable modem. If you have the installation CD you can easily follow the instructions for installing a new router and you should get through with the installation in a matter of minutes.
I hope you get everything up and running soon. Thanks for choosing FixYa.com!!

Apr 18, 2010 | Linksys WRT160N Wireless Router

Tip

How to set up router


Router set up is very easy. You will need to access the router set up interface to make changes on the router.

If you are not able to go online using the router then you will need to check the settings of the router.
First make sure that your computer is able to go online when connected directly to the modem without the router.
If your computer is able to go online through the modem only then your modem is working properly, we will need to check the settings of the router.ind network key.


Router set up for Cable Internet service provider :

This connection type uses the MAC address of the main computer to identify your connection. They generally register the MAC address of the main computer. So the MAC address is everything in this connection type. Now we set up router using the MAC address of the main computer. Main computer is the computer which was able to go online through the modem. Use only the main computer to set uo the router.
Connect the modem and the computer to the router . Check the IP address on the computer.
According to the Default gateway value open the set up interface of the router. Once you open the set up interface, you will need to clone the MAC address of the computer. Then change the wireless settings on the router and your router is ready to go.

Router set up for DSL Internet service provider.

What is DSL connection?
DSL (Digital Subscriber Line) is a high-speed Internet service that competes with cable Internet to provide online access to local customers. DSL operates over standard copper telephone lines like dial-up service, but is many times faster than dial-up. In addition to being faster than dial-up, DSL does not tie up the phone line. Coexisting with telephone service in this way allows users to surf the Net and use the phone at the same time.

There are two types of DSL connection

1 ) PPPOE : In this connection type you will get user name and password from the Internet service provider. Your computer will not be able to go online when connected to the modem only. You can open the router set up and change the Internet connection type to pppoe and type the user name and password for the ISP. After that change the wireless settings of the router and it will be ready to go.
2) DHCP : In this connection type your computer will be able to go online when you connect it directly to the modem.
you don't require the user anme and password for the ISP.
In this connection your computer will get a private IP address from the router. According to this the IP address of your router will change. Change the wireless settings of the router and it will be ready to go online.

Click Here for step bi step instructions

on Dec 03, 2009 | Computers & Internet

1 Answer

I cant configure my mbr624gu router with usb 598 mobile 3g internet


Router set up is very easy. You will need to access the router set up interface to make changes on the router.

If you are not able to go online using the router then you will need to check the settings of the router.
First make sure that your computer is able to go online when connected directly to the modem without the router.
If your computer is able to go online through the modem only then your modem is working properly, we will need to check the settings of the router.ind network key.


Router set up for Cable Internet service provider :

This connection type uses the MAC address of the main computer to identify your connection. They generally register the MAC address of the main computer. So the MAC address is everything in this connection type. Now we set up router using the MAC address of the main computer. Main computer is the computer which was able to go online through the modem. Use only the main computer to set uo the router.
Connect the modem and the computer to the router . Check the IP address on the computer.
According to the Default gateway value open the set up interface of the router. Once you open the set up interface, you will need to clone the MAC address of the computer. Then change the wireless settings on the router and your router is ready to go.

Router set up for DSL Internet service provider.

What is DSL connection?
DSL (Digital Subscriber Line) is a high-speed Internet service that competes with cable Internet to provide online access to local customers. DSL operates over standard copper telephone lines like dial-up service, but is many times faster than dial-up. In addition to being faster than dial-up, DSL does not tie up the phone line. Coexisting with telephone service in this way allows users to surf the Net and use the phone at the same time.

There are two types of DSL connection

1 ) PPPOE : In this connection type you will get user name and password from the Internet service provider. Your computer will not be able to go online when connected to the modem only. You can open the router set up and change the Internet connection type to pppoe and type the user name and password for the ISP. After that change the wireless settings of the router and it will be ready to go.
2) DHCP : In this connection type your computer will be able to go online when you connect it directly to the modem.
you don't require the user anme and password for the ISP.
In this connection your computer will get a private IP address from the router. According to this the IP address of your router will change. Change the wireless settings of the router and it will be ready to go online.

Click here for step by step instructions

Dec 03, 2009 | Computers & Internet

1 Answer

Just bought an idect N1i, followed installation instructions, everything looks ok but doesnt make or receive calls.


Hi

Sorry to bother you, but would you be able to upload the user manual, I just bought an idect N1i, it came without a user manual, and I am struggling to find one online, your help would be greatly appreciated.

thanks

Sunita

Dec 01, 2009 | Lands Phones

1 Answer

Can't configure my router to my modem, i follwed the instruction already from the manual. it still didn't work. still can't connect to the internet


Router set up is very easy. You will need to access the router set up interface to make changes on the router.

If you are not able to go online using the router then you will need to check the settings of the router.
First make sure that your computer is able to go online when connected directly to the modem without the router.
If your computer is able to go online through the modem only then your modem is working properly, we will need to check the settings of the router.ind network key.


Router set up for Cable Internet service provider :

This connection type uses the MAC address of the main computer to identify your connection. They generally register the MAC address of the main computer. So the MAC address is everything in this connection type. Now we set up router using the MAC address of the main computer. Main computer is the computer which was able to go online through the modem. Use only the main computer to set uo the router.
Connect the modem and the computer to the router . Check the IP address on the computer.
According to the Default gateway value open the set up interface of the router. Once you open the set up interface, you will need to clone the MAC address of the computer. Then change the wireless settings on the router and your router is ready to go.

Router set up for DSL Internet service provider.

What is DSL connection?
DSL (Digital Subscriber Line) is a high-speed Internet service that competes with cable Internet to provide online access to local customers. DSL operates over standard copper telephone lines like dial-up service, but is many times faster than dial-up. In addition to being faster than dial-up, DSL does not tie up the phone line. Coexisting with telephone service in this way allows users to surf the Net and use the phone at the same time.

There are two types of DSL connection

1 ) PPPOE : In this connection type you will get user name and password from the Internet service provider. Your computer will not be able to go online when connected to the modem only. You can open the router set up and change the Internet connection type to pppoe and type the user name and password for the ISP. After that change the wireless settings of the router and it will be ready to go.
2) DHCP : In this connection type your computer will be able to go online when you connect it directly to the modem.
you don't require the user anme and password for the ISP.
In this connection your computer will get a private IP address from the router. According to this the IP address of your router will change. Change the wireless settings of the router and it will be ready to go online.
Click Here for more info

Nov 16, 2009 | Cnet CWR-854 Router

2 Answers

I need set up disk for belkin rooter fsd07050


Are you trying to set up the router.
To set up the router you don't need the set up CD.
You can do it manually also.
Click Here for more info

Nov 14, 2009 | Belkin N1 Wireless USB 2.0 Network Adapter...

2 Answers

I am missing the instalation disc, can I install using online process?


All major mfr.s I know of, provide the contents of that original installation CD on line for downloading.

Oct 27, 2009 | Lexmark C500n Laser Printer

2 Answers

I have lost my installation cd for my router and cant connet it to my pc


Now you´re not writing wich model it is, but try to go to the Belkins homepage here and write the model number in the search field, maybe you can find all the software there.

Belkins homepage : http://www.belkin.com/uk/

Hope you can find the drivers there

Aug 25, 2009 | Computers & Internet

1 Answer

I bought a new desk, so i had to redo my internet, because it quit working on main computer when i hooked my computer back up, so i had to call my internet provider and i got main computer back up, and now...


you may need to reset router to factory settings. look in documents or their website for instructions that apply to your router.
Also, I assume you have everything powered off when switching cables.

Jan 02, 2009 | Computers & Internet

Not finding what you are looking for?
Belkin (F5D7230-4) Router (587009) Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...