Question about Amana ACS7270AS Electric Kitchen Range

1 Answer

My amana gas stove keeps beeping and the code F1 is flashing?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers

Hi!
The F1 code means that the Key Pad is defective, the book says that if pressing CANCEL for 10 seconds don't stop the beeping and resets, the Pad should be replaced. I have learned that if you unplug the unit from the wall outlet for a couple of minutes, most of the time the pad will reset by itself.
Good Luck!! Don't forget to rate this post!!

Posted on Sep 27, 2010

  • r11d12 May 24, 2011

    Thanks, THIS time, on the Amana ACS7270AS pressing the cancel button for 10 seconds stopped the beeping. We were getting F1 and then F5 codes, All parts of oven and range top sem to be working. Last year the repair guy replaced the inside panel & glass top. Thanks.

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 126 Answers

SOURCE: amana stove with F1 beeping code.

Amana is now owned by Whirlpool. The customer service number is 800-253-1301. If you have reciepts (Proof ) of service calls you may be able to negotiate some form of concession. Good luck it can be a frustrating process.

Posted on Dec 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an amana artc8600 and the error code it has is f1. could you tell what the code means. Also, when i try to turn the oven on no matter what setting it keeps turning off i have to try a bunch of...


HI,
Disconnect power to stove
Gain access to the back of the clock (electronic range control or ERC).
Unplug the pad ribbon connector from the ERC. This will be a flat wire approx. 1 1/2" to 2" wide.
Make sure everything is clear and will not short out when power is turned back on.
Turn power back on to stove.
Watch for the F1 and the beep
If you see f1 and hear the beep its the ERC
If after approx. 30 minutes you do NOT get the F1 and hear the beep, replace the touch pad.

Thank you for using fixya
Leo Ponder
Please rate me if this helped.

Jul 23, 2011 | Ovens

1 Answer

My stove has F1 on the screen,and i beeping. I


Sorry it can not be reset.
The F1 code is a failed electronic control. The clock/oven control must be replaced.

Jul 05, 2010 | Amana ACS7270AS Electric Kitchen Range

1 Answer

I have a tappan range that keeps getting F1/F3 in on the display panel.


How to test many brands of Ranges that are flashing a F1 fault code: You have either a bad ERC (clock) or a bad touch pad.
  1. Disconnect power to stove
  2. Gain access to the back of the clock (electronic range control or ERC).
  3. Unplug the touch pad ribbon connector from the ERC. This will be a flat wire approx. 1 1/2" to 2" wide.
  4. Make sure everything is clear and will not short out when power is turned back on.
  5. Turn power back on to stove.
  6. Watch for the F1 and listen for the beep.
  7. If you get the F1 and beep, replace the ERC.
  8. If after approx. 30 minutes you do NOT get the F1 and hear the beep, replace the touch pad.
    NOTE: Some models incorporate the touch pad and the clock as one part. * We have seen a few of the newer Maytag ranges with a F1 fault code and the problem was the oven temp sensor, check carefully the wires to and from the oven temp sensor!!

Mar 03, 2010 | Tappan TGF363 Gas Kitchen Range

1 Answer

My daughter's Amana gas oven ARGS765OSS turns off.


The F1 code is a faulty electronic control board EOC(clock).
Go to repairclinic. com and put in your model number for a good price.

Jan 03, 2010 | Ovens

2 Answers

The stove just says F1 and beeps won't let me do


Hello with the limited information and no make or model I can only give a generic response to this one. Most manufacturers F1 code indicates a bad control board (EOC) and or a bad touch-pad. If you have any other questions please feel free to comment. Mike

Nov 03, 2009 | Ovens

1 Answer

Amana stove with F1 beeping code.


Amana is now owned by Whirlpool. The customer service number is 800-253-1301. If you have reciepts (Proof ) of service calls you may be able to negotiate some form of concession. Good luck it can be a frustrating process.

Dec 29, 2008 | Kitchen Ranges

1 Answer

Amana acs7270ax stove beeping and flashing panel


The F1 error code indicates a control board failure. You need to replace the electronic control board. Good Luck Please rate

Dec 18, 2008 | GE Spectra JBP78 Electric Kitchen Range

1 Answer

Stove reads "F1" on the display and beeps


Go to www.applianceaid.com/images/ge-built-in-oven-faultcodes

Jun 14, 2008 | Frigidaire FGF326AS Gas Kitchen Range

Not finding what you are looking for?
Amana ACS7270AS Electric Kitchen Range Logo

700 people viewed this question

Ask a Question

Usually answered in minutes!

Top Amana Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you an Amana Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...