Question about Samsung HPT5054 50 in. HD-Ready Plasma Television
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Broken Plasma TV
I'm looking for a broken screen HP-S5053 to buy from someone. I have a new screen that needs a home. I need one that is complete and working other than the screen. Or I would sell my screen to you. Thanks, Wade email@example.com
Posted on May 21, 2008
I had the same problem and had the TV serviced and found that the y board was blown $350 total. The repair guy explained that the board has a hot transister underneath that slowly leaked onto the board, but says that they can not get Samsung to admit to the problem. Works fine now but only have a 90 day warrenty on the parts.
Posted on Jul 01, 2009
Yes the diffusion problem on your tv is due to the pdp panel aging. What you can try is readjusting the VSCAN voltage, there is a test point marked VSCAN using a DVM you can first check the voltage, should be around -- 190 turn the adjustment counter clockwise this should reduce the voltage, watcthing the picture turn control untill the sparkling pixels stop. That should do it. The panel is starting to age this may occur again until you can't adjust it out meaning a bad panel.
Posted on Nov 08, 2010
I just had a similar issue with my 46" Samsung LCD and fixed it myself for $5.11! I realize we have different tvs, but I bet it is the same issue ... crapped out capacitors.
I researched the problem online and most places, like samsung's site, referred me to call a repairman and called for the whole control panel or power supply to be replaced for anywhere between $400-$1000. I was like ... "screw that" ... I refuse to put in a fautly part in the place of a faulty part. So I continued to research.
That's when I stumbled on youtube. There are many how to videos on how to tackle this daunting task. I read that the issue was more than likely faulty capacitors and there is a very easy way to tell if it is in fact the capacitors that are blown. instead of having a flat top, faulty capacitors are crowned or even ruptured! When I opened up my TV I saw 3 blown capacitors!
So I bought 3 new capacitors all with the same uf and higher volts ... I think all three of my capacitors were 1000 uf and 25 volts. I kept the uf the same (recommended) and raised the voltage to 35 volts. It doesn't mean more volts, it just means it COULD handle more volts if it had to (which was the problem those cheap Samsung bastards screwed up on). This is a very common problem with Samsung TVs.
Anyway, I have never soldered before, but I did it. I warmed up the solder on the bad capacitors and removed them them slid thenew ones in and soldered them in and popped everything back together ... and PRESTO .... the damn thing works better than ever!
3 capacitors= $5.11
1 solder gun and solder= about $18
fixing an incredibly intimidating TV by yourself= PRICELESS!
Seriously ... don't be afraid to F up ... check it out on youtube and other place and save yourself a bundle. Source(s): I just fixed my TV!!!!!!!!
Posted on Mar 17, 2011
Tips for a great answer:
Jan 18, 2016 | Samsung HP-R5072 50 in. Plasma HDTV
Dec 21, 2015 | Samsung PN60F5500 60-Inch 1080p 600Hz 3D...
Jul 16, 2011 | Samsung 50 in. Plasma TV
Jul 21, 2010 | Samsung HP-R5072 50 in. Plasma HDTV
Jan 11, 2010 | Samsung HP-R5072 50 in. Plasma HDTV
Oct 16, 2009 | Televison & Video
Jan 29, 2009 | Samsung HPT5054 50 in. HD-Ready Plasma...
Dec 09, 2008 | Samsung HP-R5072 50 in. Plasma HDTV
Sep 10, 2007 | Samsung HP-R4252 42 in. Plasma HDTV
514 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: