Question about RCA 36V430T 36" TV

1 Answer

Question/ Bkalipi@cox.net Is there an area where I can find the specs for my television set on the computer. so that way I can find the part i need for my television.

Posted by on

  • Bronz May 23, 2008

    The make and model of my television is a 35", 36" RCA model# F35750ST. I'm looking for the vertical curcuit. Where can I locate the VERTICAL CURCUIT with in my television set?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

What part are you looking for? The schematics or service manual can be purchased. Is your model 36V430? Describe the part you are looking for.
Dan

Posted on May 23, 2008

  • ABRsvcs May 23, 2008

    Look for a small flat IC with about 9-14 pins attached to a heatsink. It should be marked LA7837 or something similar. Try resoldering that first. If that does not resolve your problem, replace the IC and report the results here.

    Dan

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a code to put into my Cox remote so I can turn the TV on and control the volumn, TV model is L32HD31R


Here you go:
http://www.cox.com/support/cable/pdf/remotecodes_sa2000.pdf

Let me know if this helped you out a lot dude.

Oct 29, 2009 | RCA Standard (CRT) Televisions

1 Answer

No Picture. I do have sound and it will change channels. I have unplugged power cord and let set. Lights flash on front like it is re-setting itself, but still no picture. I have also removed the DVD...


This could be one of several things, the line or frame stage may have developed a fault which would put the set into a protection mode to stop any damage to the CRT. You would need to remove the rear cover & use a mutil-meter to check which voltages are present & which are missing to the timebase stages. It could be the frame IC or the line output transistor/ output stage.

Sep 29, 2009 | Toshiba Standard (CRT) Televisions

1 Answer

Is DTV converter box compatible with this set


how do u get cable ? now who form direct from wall cox cable charter or dish ?

Oct 08, 2008 | Durabrand DWT1304 13" TV

1 Answer

I lost my instruction manual and can only get local, non cable channels.


Go into the menu to channel setup and change the setting from tv back to cable(catv).

Jun 26, 2008 | Durabrand DU1301 TV

1 Answer

DEAD SET


Try addressing the vertical problem first. If the vertical IC has shorted, it can prevent the set from starting properly. That being said, it is also possible that there is a power supply problem (regulator) that was not providing the proper voltages for the vertical circuit. If that is the case, addition troubleshooting needs to be done with test equipment. Figure on a parts cost between $12-$25. Add in the local labor rate for the total repair cost.
Dan

Jun 03, 2008 | Durabrand DWT2704 TV

1 Answer

Picture format ?


This tv maxes out at 1080i, but that is for the HDMI input. 720p for the Component video input.

Feb 02, 2008 | Philips 30PW8420 TV

1 Answer

Tuner


no the tuner may be damaged and have missing SMT parts. replace the tuner part# 23321435

Jan 20, 2008 | Toshiba 32A33 32" TV

1 Answer

TV Problem


picture is milky white is due to crt.if it is old set. or check video section

Sep 20, 2007 | Zenith B25A10Z 25" TV

Not finding what you are looking for?
RCA 36V430T 36" TV Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

John mullen

Level 2 Expert

245 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...