Question about Sharp Notevision PG-M10X Multimedia Projector

1 Answer

Sharp PG-M10X projector

We replaced the bulb in our Sharp PG-M10X projector. When we turned it back on, it projects the image in three parts. We don't have the original remote control. Is there any way to get the images to align with out the remote?
Alan
703.377.7121

Posted by on

  • Anonymous Mar 06, 2009

    Me again, in response to punk39. I'm not sure what you mean by "ghosting". The image has 3 sections, all the same. Any help I've been able to find says it can only be fixed with the original remote control, which has long since disappeared. A replacement on the web runs a couple of hundred dollars. I keep hoping there's a way around spending that kind of money. It is still a very good projector and I'd love to resue it.

  • punk39 May 11, 2010

    is it a ghosting 3 part image if so it may be the colour wheel is out of synic

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Tel 703 377 7121 Hi Allan
It might be a digital or optical problem. This symptom was often part of the CRT type projector setup but i have not seen in the digital single lens type.
Is the lamp sitting 100% proper. Have you displayed the content machine and source on another display device? Was the machine dropped or knocked? It is an unusual symptom to have just be replacing the lamp..so something else has occurred.
If a digital problem in could either be a circuit malfunction or software (IC rom issue)
Re your Sharp PG-M10X We are able to supply replacement lamp delivered next time you need one, as we ship internationally and also the same with our revolutionary ICE Digital Daytime projection screens.
http://www.youtube.com/watch?v=HvZ2DlVJ790 http://www.youtube.com/watch?v=qL_44xfK9y8 Regards Kevin Andreassend ICE AV Technology Ltd http://www.digitaldaytime.com iceavtech@gmail.com +64-9-414 2348

Posted on Sep 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Projector only showing background of computer


1,check the interface of the input port
2,change the solution of the computer, you can change to 800*600 ...
We supply original projector lamp,bulb,parts,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry,Lampdeng Limited

Jan 29, 2014 | Sharp Notevision PG-C20XU Multimedia...

1 Answer

I have replaced the bulb in a Sharp PG-F211X and all is working well. How do I reset the lamp hours back to 0?


While simultaneously holding down MENU/HELP, ENTER and the down arrow on the projector, press STANDBY/ON.
LAMP 0000H is displayed, indicating that the lamp timer is reset.

May 16, 2011 | Sharp PG-F211X Projector

1 Answer

My sharp PG 10s Notevision comes on. However, is not projecting my computer images on the screen


Make sure the connection from the pc to the projector is secure, also make sure the display settings on the computer are set to extend the desktop onto the projector, and that the projector is set to pc mode.

May 12, 2011 | Sharp Notevision PG-B10S Multimedia...

1 Answer

Rest light imer on sharp pg c45x


Turn on projector, press and hold the input, enter and undo buttons on
the projector then while still holding those three press the on button. Make sure you do this before the timer goes to 0% or it wont turn on again.

Apr 21, 2011 | Sharp Notevision PG-C45X Multimedia...

1 Answer

Hello, i have a sharpe PG-M20S, and just replaced the bulb. I accidently threw the power cable away; I found another in a drawer; i plugged that in; I power the projecter on, and it stays on for 1 second...


There is no problem with the cable as the voltage ident on it is the maximum safe voltage that may pass through it without risk of electric shock.
I would imagine that you have to find your instructions and reset the lamp life now.
Hope that helps.

Feb 17, 2011 | Sharp Notevision PG-M20S Multimedia...

2 Answers

Projector shut down after replacing the bulb and wont turn on now


are any of the leds on the top of the projector lit? if so, which ones? red or green?

Apr 09, 2009 | Sharp Notevision PG-B10S Multimedia...

1 Answer

Flickering image


Have you check your cable? Are you using the component(RGB) to vga cable? Your vga to vga cable may be defective.

Dec 12, 2008 | Sharp Notevision PG-M10X Multimedia...

1 Answer

Video turns on and off


Hi, Switch the input to RGB, you will need the remote to do this.

Jun 28, 2008 | Sharp Notevision PG-M10X Multimedia...

1 Answer

PG-C30XU projecting criss-cross plaid image.


i suggest you do not have the projector too far away... 7ft away distance would be a Good resolution will also dimm don the square's image in the picture

Nov 08, 2007 | Sharp Notevision PG-C30XU Multimedia...

Not finding what you are looking for?
Sharp Notevision PG-M10X Multimedia Projector Logo

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Multimedia Projectors Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

kc5mgc

Level 1 Expert

8 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sharp Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...