Question about Sharp AR-M350N Copier
System error e007 for canon copier ir2016j copier needs solution
Posted on May 25, 2009
Canon copier ir 2016 system error E007
Posted on Jun 11, 2012
Canon photocopier IR2016J show error code E007. Please advised me on how to resolve it or rese it. Thanks
Posted on Dec 10, 2013
Your fixing film is damaged. replace the fixing film or take to a dealer and have them do it.
Posted on May 30, 2008
ERROR E007 FIX..... FILM
Posted on Mar 30, 2015
SOURCE: Canon iR-2016 System erro E007
The erreor code E007 has to do with the fixing ***'y upper film ***'y or roller. It is saying that the film is not moving in and out of "HP" Most of the time it means that the fusing film is torn and not moving properly. If you are getting paper jams in the fusing area and or unfixed or smeared copies. You most likly need to have the fusing film ***'y replaced. It could also be that it is out of place and needs to be readjusted. The only problem is that it's a little tricky to get to and not a bad idea to have a new film to replace the old one while you have it out. Good Luck
Posted on Mar 16, 2008
Thanks for using FixYa. Error E007 means there is a jam in the Fixing/Fuser Assy. Error E007 is related to a non-detection of the Fixing Film/Upper Roller, the fixing film sensor didn’t detected the rotation of the film for 6 sec or more while the fixing motor is driven. Please check the condition of your Film also check the green handle in this area for paper jam removal if it is broken or removed, may also cause this error. If everything is fine then try clearing the error by entering the service mode, you can do it by pressing *(star), then press 2 and 8 keys at the same time & then press *(star) again.
Now press COPIER>FUNCTION>CLEAR>ERR, to clear the error code.
Please do rate the solution and revert for further assistance.
Posted on Sep 28, 2009
SOURCE: Canon copier ir 2016 system
i have canon ir2016 photocopier machine and its given me system error, and the error code is E007. i now when its happen so, its the fuser film that is worn out. i change the fuser and fix a new one but still the error is there. what should i do next to clear the error?
Posted on Sep 14, 2011
Tips for a great answer:
Apr 03, 2013 | Printers & Copiers
May 12, 2011 | Canon iR 2016i Black and White Copier
Dec 24, 2010 | Canon CLC 1140 Copier
Nov 20, 2009 | Canon PC-940 Black and White Copier
May 02, 2009 | Canon iR 2016i Black and White Copier
Mar 15, 2008 | Printers & Copiers
15,698 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: