Question about Canon (6981A002AA) for imagerunner 2200, 2800, 3300 Print Server

1 Answer

Solution Hi, How is doing? I have a problem for my Canon IR 2200 photo copier machine with an error message E000014-0000. What does this error means & how can i solve this problem? Thanks Binyam A.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 54 Answers

Hai, its a fixing moter problem ,replace the fixing motor

Posted on Aug 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to solve canon ir 3300 error code e0000190000


Neele, Error code E000019-0000 is a waste toner full , to get rid of this error, remove the waste toner bottle located left rear side of the machine,dispose of waste toner and clean the neck of the bottle because waste toner could obstruct the toner sensor beam. Switch off then on, OK to use.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Thread Canon IR 2200 Error E000019 0000
Canon ERROR 19 Waste Toner Tank

Jun 13, 2014 | Canon (6981A002AA) for imagerunner 2200,...

2 Answers

What does error code E602-0003 mean on an IR 2200?


A HDD (iScsi most probably) failure - Internal HD. (Hard Disk Drive = HDD).

Jun 02, 2010 | Canon (6981A002AA) for imagerunner 2200,...

1 Answer

What does error code E0002020001 mean on a Canon IR 2200?


check the platen glass & adf scanning Glass is proper
That mean white plate error.

May 06, 2010 | Canon (6981A002AA) for imagerunner 2200,...

4 Answers

Canon ir 3300 error code display e000019-0000


It means that your waste toner box is full.

You can do the next:

On left side of copier, on lower left side you have small cover with screw.With screw driver unscrew it and remove cover. Remowe the waste toner box/container, and clean it, after you removed toner wash it with water and clean the inside and outside of box neck with alcohol to remove the antistatics. Place it back and restart the copier.

Mar 31, 2010 | Canon (6981A002AA) for imagerunner 2200,...

4 Answers

Error code E000002-0000


Get in the service mode *28* and there under function, clear, err.

If not replace the fixing film unit

Jan 02, 2010 | Canon (6981A002AA) for imagerunner 2200,...

6 Answers

CANON IR 3300 HAS ERROR CODE: E000002-0000


OK, but first try to clear the error under service mode, then replace fixing film assy, for EU 240V is FG6-6041.
To clear the error:
* 2 8 *
COPIER
FUNCTION
CLEAR
ERR
OK
Turn off and on ( main switch )

If this dont help - replace fixing film assy.

Dec 02, 2009 | Canon (6981A002AA) for imagerunner 2200,...

3 Answers

E000014-0000


E000014-0000 ir 3300 canon machine solution

May 03, 2008 | Canon (6981A002AA) for imagerunner 2200,...

7 Answers

E000007-0000


Hello Evank,
I will gladly help you understand what's going on, but I am afraid nothing short of service call will actually resolve your problem. First off, the error code you are getting will cause the copier to just suddenly STOP...... which indeed will cause you to wind up with a paper stoppage but not a true paper jam. I apologize for what is like a distinction without a difference,but i just wanted to give the benefit of as much information as possible.The error code you are getting refers a subsystem of the copier called the fuser, which is a high temperature high pressure area that is common to all copiers. Because of the potential danger of high temp and pressure, all copier manufacturers design their products to be VERY sensitive to monitoring all aspects of the fuser as they do not wish to burn your building down. (bad 4 marketing) The E000007 error code refers to the fusing system. The code basically means that the on board computer of the copier did not get the signal it requires telling it that the fuser was working properly. That in fact it was not turning at the same time /speed as the copier. There is a sensor on this "fusing unit" that detects this speed. Either the sensor is bad, the fusing unit is indeed not turning at the correct speed and therefore is defective, or the dc controller ( a circuit board on the machine that processes most inputs) is defective. Most likely its the fuser/fusing unit which indeed is a "unit" and if it needs to be replaced will include the sensor previously described. The fuser (Canon also refers to it as a fixing unit) is good for @150000 copies more or less according to Canon and that is one of those things that I would call "according to the manufacturer" promises.In short, after this long winded description, unless you are a well trained copier tech, you will need one. But at least I have given you enuff info that you won't get screwed by the "copier dude" . :-) Of course I "IS" one. LOL . Good luck and I hope this helps you at least a little. ...........SPINAL........

Apr 23, 2008 | Canon (6981A002AA) for imagerunner 2200,...

3 Answers

Error Code description


The Canon is coming on with a code E602-0003 can somebody please help it is only 9 months old and the company we bought it from is out of bussiness. Please email me @ reception@biscayneroofing.com

Thanks
Madlyn

Feb 25, 2008 | Canon (6981A002AA) for imagerunner 2200,...

Not finding what you are looking for?
Print Servers Logo

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Print Servers Experts

old marine
old marine

Level 3 Expert

1464 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

quennie732

Level 2 Expert

393 Answers

Are you a Canon Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...