Question about Canon PIXMA MP160 All-In-One InkJet Printer

1 Answer

Resetting Pixma iP5200R to Factory setting

After installing Time Capsule, my printer would only work by being plugged into the usb point on my mac.
How can I restore the printer to the factory setting and then reinstal it so that it works wirelessly?
Hope you can help me ,
Thanks.
Ann Corby

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 377 Answers

Hi dear

this the error code
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full




First, download the software at http://www.box.net/shared/4yblbn34kg

Secondly, to run the software your printer has to be in service mode. Do that by
- unplug cable
- press and hold "power" button
- plug cable
- press "resume" and release
- release the "power" button
At this stage, your computer will detect a new hardware

Run the software.

oke


Posted on Jun 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A CANON IP5200R IF I TURN IT ON, YELOW LIGHT FLASES 5 TIMES AND THEN 5 TIMES AND IT GOES ON LIKE THAT CAN ENYONE HELP ME TO FIX THIS PROBLEM


hello leif mo, these are the instructions from the CANON support page Probably your waste ink counter. Should be cleaned or replaced before resetting but usually you can get away with resetting once.
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Select functions below with RESUME, execute with POWER

0 presses - green light - Test Print (exit service for i960)
1 press - orange light - EEPROM info print
2 presses - green light - EEPROM initialise
3 presses - orange light - reset waste ink counter.

Hope this answers all your questions Please remember to Rate/vote for any solution that helps you out. Leave a comment if you need more help. Thanks for using Fixya

Aug 09, 2011 | Canon PIXMA iP5200R InkJet Photo Printer

1 Answer

How to recieve fax from canon pixma-mx 330


You will need to plug in a phone cable to the back of the printer. Then enter the printer's set up page by typing in the IP address of the printer into a browser and walk through the fax setup steps.

Mar 01, 2011 | Canon IP5200R Colour BubbleJet with...

1 Answer

I dont have a driver to install my Pixma iP5200R printer. Need some help..


on this page
http://software.canon-europe.com/products/0010234.asp
select a operating system and a language
download your driver and success

Feb 20, 2011 | Canon PIXMA iP5200R InkJet Photo Printer

1 Answer

I can't see my Canon iP5200R in windows 7 as a wireless printer... I can only use it with USB the conection


There may not be a solution for this as yet because Windows 7 has not been released to the public yet.

The latest release was the RTM which was issued to manufacturers to bring their drivers up to date with it.

Aug 08, 2009 | Canon PIXMA iP5200R InkJet Photo Printer

1 Answer

Can't print from MacBook, through Time Capsule, to Lexmark x5470


turn on the printer sharing via the system preference panel on the computer that is on the system via usb.
Then on your wifi computer look for shared printers and you'll see your printer in the list under the host computer name... use that setting and it should fire up for you!
let me know how it goes...

Apr 01, 2009 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

I am re-installing my canon ip5200r printer...


http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=11994

Click select OS and then select your version of windows then install what pops up under drivers. This is your backup if the cd doesn't work

Dec 28, 2008 | Canon PIXMA iP5200R InkJet Photo Printer

2 Answers

Can't Scan with MX310 hooked up to Time Capsule


If you mean you connected it to the airport, that only supporting printing, not scanning. Have to plug it into the computer.

Jul 02, 2008 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Wireless and wired connection fails with Toshiba laptop


Do you have a firewall turned on that might be preventing your computer from communicating with the printer properly?

Jun 27, 2007 | Canon PIXMA iP5200R InkJet Photo Printer

1 Answer

I also cannot install this on 2000 Professional


Have you tried the windows xp driver as it's based on windows 2000 drivers anyway.

Nov 07, 2006 | Canon PIXMA iP5200R InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA  MP160 All-In-One InkJet Printer Logo

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...