Question about Siemens Gigaset 4000 Phone

1 Answer

Phone holds charge from 12-55 min. and then goes dead

I bought this Siements 4215 Gigaset two months ago--used. Had to buy new batteries recently and installed them less than a week ago. What's wrong with the phone that it won't hold a charge for nice long uninterrupted chats? My original phone gave me no problem in this area until the whole phone died--I'd had it for several years.

Posted by on

  • kaybeeme Jul 04, 2008

    The phone is working fine now. Thanks for answering.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 106 Answers

Your handset or charger has gone bad (provided you installed rechargable batteries), or both. The previous user may have installed alkaline batteries (is their a white powdery residue in the the charge compartment?), and that can ruin the charge circuit. Either way, you probably need to contact repair. You can go to www.cordlessrepair.com

Posted on Jul 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The phone does not hold charge... dies after a few minutes of talk time


Quite probably it's the battery. Open it, get the specification for battery and buy a new one. Be careful, there are many very similar batteries but connection to phone is different.

Oct 22, 2015 | Siemens S67H GIGASET Handset With Charger...

1 Answer

Cordless ph. not holding charge


You should check battery with oher charger. If charges, your problem is tha charger of your phone. Probably you should take it for service and if to expendive, buy a new one

Feb 10, 2015 | Siemens Gigaset 200 1Line Cordless Phone

1 Answer

How do you reset the base and handset of a Siemens 4215 to "0000" ?


My Siemens Gigaset AS15 Cordless Phone is constantly calling the same number, no matter which number I dial! What shuld I do?
Thank you.

Jan 31, 2010 | Siemens Gigaset 4215 Cordless Phone

1 Answer

I have a new dead phone


You need to make sure the phone is on the cradel half on half off is not the units fault its the users, in saying the the unit will charge the battery if you dod not kiill it already, leave the phone on the cradel if that does not charge the battery a nice day trip to radioshack for a new battery might be what you have to do, Sorry to hear you misfortuens with uniden there a good company but make things that people just do not understand.

Jan 11, 2010 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Phone does not hold ''charge'' when removed from the charger


hi

it seems that the battery in the phone is dead. replace it with new batteries, always go for rechargeable alkaline batteries.

hope it helps
RAhUL_hunk

Mar 10, 2009 | Uniden Cordless Phone

1 Answer

Siemens sl30 phone wont charge. Just blinks the last part of the battery. When I turn on the speakerphone to dial the phone dies and shuts off. when regular dialing can hear crackling static


I have similar problem with my gigaset 4000 micro, i bought 600mah NiMh bettery and when I start charging it charges cca 3 min and displays that battery is full and it doesnt charge it any more. I can speak max 12 minutes and phone starts beeping that battery is empty. What should i do to make phone to charge this battery properly.

Aug 08, 2008 | Siemens Phones

1 Answer

Gigaset 4215


Did you check to see if the battery leaked? I had a similar experience and it was because one of the batteries had leaked. This might also explain why the keys are stuck.

Jul 09, 2008 | Siemens Gigaset 4215 Cordless Phone

2 Answers

Phones will not register


Try this:
Pick a handheld, press Menu - H/set settings - Reg Handset - Select Base 1, enter 0000 as password. Now on the bottom of the base station press and hold the Register button in for about 10 seconds or until the h/set beeps.

Geno

Jan 15, 2008 | Siemens Gigaset 4215 Cordless Phone

1 Answer

Caller id


Caller ID in the USA uses the FSK standard. For the most part, caller ID in India uses DTMF (although I have heard of some FSK usage).

I am currently living in New Delhi and have an Airtel home phone line. My switch uses DTMF. I went to the Palika electronics bazaar (I aways use shop number 266 near gate 5, they seem to be a little kinder to foreigners as far as the "final price") and purchased an DTMF to FSK convertor. My US phones now show caller ID information, although using US number seperations ### - ### - ####. I paid R500 but you could probably get it for around R400 if you are willing to put in the time bargaining. It looks like they are also available on Indian Ebay.

Mine says UST001B. It looks like these are low volume items because they stuck the components into a box marked "DSL Splitter" It works to convert the caller ID as advertised.



May 03, 2007 | Siemens Gigaset 4215 Cordless Phone

Not finding what you are looking for?
Siemens Gigaset 4000 Phone Logo

Related Topics:

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Phones Experts

kakima

Level 3 Expert

96417 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Siemens Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...