Question about Motorola Mobility RAZR V3

1 Answer

Is my phone broken?????????????

Keypad keeps on flashing on and off but screen will no tcome on at all. I've taken thebattery out and it keeps on doing the same thing. I have some very important photos saved to the phone and i'm afraid thati lost them forever!!!!!!!!!!!!!!

Posted by on

  • Anonymous May 23, 2008

    I have the same problem today. It worked fine and then started blinking and screen is black. ATT store says they cannot get anything off of the phone. Let me know if you heard differently. kyle0027@yahoo.com

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

You're phone probably is broken for good, But if you take it to the carrier store, they can connect it to their system and upload all your photos and contacts to a new sim card

Posted on May 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i type a letter the full stop keeps appearing and spacing far


I have also developed this random full stops when texting issue. its really annoying. The phone hasnt been near a drop of water

Apr 11, 2012 | RIM BlackBerry Curve 3G 9300 Cell Phone

Tip

How to repair keypad problem in China Mobile


First we need to know china phone keypad connected with PCB how way
(A) Direct on PCB
(B) Flex System (flex cable direct soldering pcb to keypad panel)
© Flex and socket system include (flex one side soldering with key panel other side connect to pcb with socket)
(D) only Socket System (here have 2 socket, 1 with key panel others with pcb)
Keypad problem have various type
1. All key not work.
2. some key work and some other not work.
3. sometimes work and sometimes not work.
1. All key not work
china phone all key not work for this type of problem
(A) though its touch screen phone, first try to disconnect touch panel line from phone pcb or display flex (4 line)
(B) though not solve and keypad direct on pcb first you try to good clean full pcb with cleaner.
© though not solve now you try to format/flash your phone because some time key problem come from software problem.
(D) though still not solve now you check must be CPU. 95% china phone keypad directly going in cpu. and other 5% first going to resistor or capacitor near the cpu or keypad than going to cpu. so now first check them than you can try to re-hot, re-soldering or changing cpu.
(E) though its flex or socket system, first check GND connection continuslay pcb to key panel. next check full flex or socket all line going continuously pcb to key panel or not. also sometimes flex or socket shorted with other line or gnd so check also them.
(F) Also you can check all key anyone is short 2 line.
(G) sometimes keypad line broken from cpu pin on pcb to key panel, so check them.
2. Some key work and some other not work
Some key work and some other is not work for this type of problem
(A) maximum time this problem we face for flex or socket system keypad. so check flex cable and socket all line any line is broken or not and though need change them. and check all key connection on key panel.
(B) though its direact on pcb, some of key line broken internaly. and maximum china phone have alternative test point near every key or with other key on keypad. so check them with multimeter and though need connect to not work key with near testpoint or other working key.
© common problem is keypad metal ball (which is short 2 line on key when we press) sometimes its damage for phone water damage or over key voltage, so clean them or change.
(D) also try to check line continuously from cpu to not working key.

3. sometimes work and sometimes not work
this problem come from this defect
(A) flex or socket system keypad any line is bad soldering or do lose contact. check them and
re-soldering or keep there line join with extra ware.
(B) for cpu bad soldering or cpu pin is broken. so re-hot or re-ball cpu.

on Jan 06, 2010 | Cell Phones

1 Answer

Key


Nokia 6600 keypad/key problem! I hope I've put this in the right section, as I'm not sure if this is a hardware of software problem I've posted it here, hope I'm right! icon_razz.gif

I bought a Nokia 6600 recently with a joystick that didn't go down. I replaced the keypad pcb, as there was a small tear in the ribbon at the bottom of the old keypad PCB. This fixed the joystick problem, but I now realise there is another problem with the phone!

The numbers 7,8, and 9 all display 1,2, and 3 when you press them. The '0' key seems to clear whatever's on the screen, so I suspect it's acting like the red end call key. It does this with both keypad PCBs installed, so I think it's another problem. Would this be the small gold contacts on the bottom of the phone, a software problem, or some other gremlin in the works?

I've had a quick search and someone suggested *#7370# to reset the phone, and someone else said it could be a keypad IC that's gone - any other suggestions? I'm at work tonight so can't get to the phone until tomorrow morning, and as the '0' key isn't working properly I can't check which software version the phone is running icon_frown.gif

May 25, 2011 | Nokia 6600

1 Answer

My screen on my phone has gone completly blank. I can still recieve texts and calls, but i cant see them at all. The keypad lights still come on, but the screen is totally black. I have taken the...


Your display circuit is broken, even if the LCD-panel,
seems to be ok the display is damaged.
This is a very common problem in phones.
The only way to fix this is to change the display.
You need a T-5 or 6 Torx Skrewdriver to do the job.
You can find displays for fair price at :
www.mytrendyphone.com
This is your solution! Please vote!

May 15, 2010 | LG VX9400 Cellular Phone

1 Answer

N72 screen flashes white


the problem on it is the crystal iC of the Display, replace it

Apr 10, 2009 | Nokia N72 Cellular Phone

1 Answer

Faulty w850i


Are you sure you have flashed it correctly? I had a white screen problem and flashing fixed it. Make sure both your main and fs firmwares are the same type eg W850_R1ED001_FS_VFE_LIVE_1_RED52
W850_R1ED001_MAIN_GENERIC_CY_RED52
and your custom pack can be any w850

Dec 03, 2008 | Sony Ericsson W850i Cellular Phone

1 Answer

Blank screen


I Had The Same Problem. All you have to do is Charge Your Phone. Then it should work nicely

Aug 20, 2008 | Samsung SYNC SGH-A707 Cellular Phone

1 Answer

Motorola v3i


Keeps entering 6's, tries to go online, tries to increase ring volume, keypad flashes....resetting by switching on/off or removing battery does not work. It's not water damaged. Help !!!
my v3i keeps connecting to the internet by its self and flashes error GPRS or somthing like that,across the screen and no buttons work at all, removing the battery is the only way to stop it. please help.
Have the same problem? Click Here

Nov 15, 2007 | Motorola Mobility RAZR V3i Cellular Phone

1 Answer

C168 Keypad not working


motorola c168 all keypad not work solution

Aug 24, 2007 | Motorola Mobility C168 Cellular Phone

Not finding what you are looking for?
Motorola Mobility RAZR V3 Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

D. E. Hev

Level 3 Expert

1059 Answers

Lawrence Oravetz

Level 3 Expert

7686 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...