Question about Whirlpool Duet GHW9150P Front Load Washer
It is recommended to try putting the machine into diagnostic mode. If it won't enter
diagnostic mode, then you need to replace the main control board.
The washer must be empty and the control must be in the OFF
state before pressing the touch-pad sequence to start the test.
Starting the Test Mode
■ Close the door.
■ Push CONTROL/ON (if present on this model).
■ Select the DRAIN/SPIN cycle.
■ Select NO SPIN by pressing the SPIN SPEED touch-pad.
■ Push PREWASH OPTION four times within five seconds. (If
PREWASH OPTION is not present on this model, press EXTRA
RINSE four times within five seconds.) C:00 will light up on the
If the Starting procedure fails, push the PAUSE/CANCEL touch-pad,
then repeat the starting procedure.
Test Program Control
In order to advance to the next step of the test procedure, push
PREWASH OPTION touch-pad two times. If PREWASH OPTION is not
present on this model, press EXTRA RINSE two times.
Let me know how this goes and whether you need any further help
good luck and please let me know if you have any questions when doing this
Posted on May 22, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 11, 2013 | Frigidaire ATF6000ES Front Load Washer
Jul 18, 2012 | Kenmore HE2 Plus Front Load Washer
Oct 23, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Jun 17, 2009 | Whirlpool Duet 3.8 cu. ft. Front Load...
Jun 09, 2009 | KitchenAid KHWS01PMT Front Load Washer
May 26, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Sep 14, 2008 | Washing Machines
451 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: