Question about E-Machines eMachines Desktop PC

1 Answer

Emachines doesn't start

I got emachines t4510, few days ago the din't start, so i replace the power supply but the pc still no working, what you think is the matter ?,,,
i test the power supply the oldone doesn't work and the new work perfect....
thanks

Posted by on

  • 1 more comment 
  • chcamacho May 22, 2008

    i got the pc for 5 years i got it from Best Buy

  • Anonymous Feb 24, 2009

    new power supply works but the button on the front wont turn on

  • Brian Canute May 11, 2010

    was this a new machine

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 164 Answers

Hi!
Is the power supply the same rating?
Is the HDD spooling up?
Do you hear the post beep?
let me know soon, Thanks

Posted on Feb 23, 2009

2 Suggested Answers

jonb3838
  • 237 Answers

SOURCE: emachines doesn't start

Thank you for choosing Fixya.com

It could be a number of things but what i believe its going to be is the motherboard. The motherboard is not getting the power probally because the connections are bad. Are you getting any beep codes? or is it just powering up the fan? If it gives a beep code respond with that but i would almost bet its the motherboard.

Posted on Feb 16, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp dx5150 mt shut itself down won't start


most likely power supply, those power supplies are horrible and the slightest power surge cooks them. a majority of them I get in for repair are p/s issues, a few for mobo issues.

Mar 08, 2014 | HP dx5150 Small Form Factor PC Desktop

1 Answer

Looking for the front panel wiring diagram for a emachine T4510. The Power LED & the Power SW are disconnected! HDD LED was never unplugged! I need to know where they need to be!


If you look closely at the board there should be labels printed. The power switch plug can plug in either direction, but the LED must be the correct direction for it to work. No damage can be done by plugging the LED in backwards.

Jan 30, 2011 | E-Machines eMachines Desktop PC

1 Answer

Computer won't boot - fan on cpu does not run - cd drive does not power up -


Hi.

If there is no sign of life, then it is usually a power supply problem. Check PSU connector. If PSU fan does not turn on check the power cable. If power cable is good, test power from PSU using a multimeter and eventually replace PSU.

Dec 03, 2010 | E-Machines eMachines Refurbished EMA...

1 Answer

I replaced installed additional RAM in my eMachine T4510 but it wouldn't complete POST. Removed the new RAM and re-installed the factory-original RAM and it still wouldn't complete POST. Removed all RAM...


In your motherboard there will be a CMOS battery remove that battery and put it again you will get the display in your monitor, the battery will be in coin size the battery is CR2032.

Oct 18, 2009 | E-Machines eMachines Refurbished EMA...

2 Answers

My emachines t4510 powers up but get no signal to monitor


the e-machine was junk from the factory with a low life span. there disposable

Feb 22, 2009 | E-Machines Bestec ATX-300-12E Rev. D 300w...

1 Answer

Unknown error


Re-seat Video card, replace memory.

Feb 17, 2009 | E-Machines eMachines Desktop PC

3 Answers

Emachines doesn't start


Thank you for choosing Fixya.com

It could be a number of things but what i believe its going to be is the motherboard. The motherboard is not getting the power probally because the connections are bad. Are you getting any beep codes? or is it just powering up the fan? If it gives a beep code respond with that but i would almost bet its the motherboard.

Feb 16, 2009 | E-Machines T3410 (RBT3410) PC Desktop

1 Answer

Emachines W2888 not turning on


Easy fix! Sounds like you bought a bad Power supply. Purchase an identical p.supply and it will run like a car!

Jan 27, 2009 | E-Machines eMachines Desktop PC

2 Answers

Computer keeps crashing


it is the mother board you will have to goto emachines website and order new one i had same problem in a few days it will get worse

Nov 19, 2008 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...