Question about Sony BRAVIA KDL-52W3000 52 in. LCD Television

2 Answers

Coaxial to component

I work in an office that has an old coaxial cable TV feed coming in. I want to connect that feed to my 52" plasma TV (normally connected to a computer). What can I buy that will convert the coaxial signal into something the new TV will accept?

Posted by on

  • Mark218 May 23, 2008

    Thanks for the suggestion but the service we have now does not come with a tuner, HD or otherwise. Think cable TV 15 years ago. Unless you can connect some type of generic tuner box that would have either s-video or component output I don't know if that would work. The other option would be to run the coaxial to a VCR that has component output but I've read that doesn't always work.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Get a VCR and use the VCR as a "bridge" between the cable input and the TV. Your TV should have generic RCA jacks that will accept the output from the VCR.

Posted on May 27, 2008

You may need an extra HD tuner for your TV. The only problem that you may have would be the original signal running through the coaxial cable. If it's just regular TV stations, the tuner should fix the problem.

Posted on May 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Coaxial input is starting to fail. How do I fix/replace it?


The jack is directly soldered to its main board. If you have all the tools, and soldering skill ; you can replace it.
http://electronicshelponline.blogspot.com/

Jul 20, 2015 | LG 60PS60 60 in. Plasma HDTV

1 Answer

Replacing coaxial input


Coaxial cables are all standard for that kind of TV. I'm about 99% sure on that so just go to a electronics shop and buy one and double check with the person at the shop but I'm sure you'll be save just replacing your old one with the same size!!!!

May 10, 2015 | LG 50PV450 50 in. HD-Ready Plasma TV

1 Answer

How do you connect a coaxile cable wire to nec plasma tv that has no coaxile connection plug.


You need to have a decoder box from a over-the-air (DTV), cable or satellite provider that has an HDMI, "S" video, composite video, VGA or component video outputs to connect to the TV's input. The coaxial cable only plugs into the decoder box. Apparently your TV doesn't have a tuner for coaxial RF.

Jan 17, 2011 | NEC PlasmaSync 42MP3 42 in. Television

1 Answer

I want to connect to a TV that;s already connected to a cable tv box


What do you mean? Do you want to connect or add another tv to that cable box?

Like two TVs connected to one cable box. If so, on the back of the cable box you have three different ways to connect a tv from, through AV cable, component cables and coaxial cable.

If the main tv is connected by coaxial, the second tv can be connected thru AV or Component cables..

Hope this helps.

Sep 21, 2010 | Flat Panel Televisions

1 Answer

Coaxial cable


Most newr TV's do not come with a coaxial hookup anymore, you either need to use RCA cables for Audio and Video, Component Video, S-Video Jack, Digital Audio Jack or HDMI Input.

Jun 16, 2010 | Protron PLTV-32 Television

1 Answer

No coaxial connection


check if the LOCAL cable box has RCA out put, if not get this and hook up from the coaxial wire
http://www.radioshack.com/product/index.jsp?productId=2486501&CAWELAID=107592963
fosg2000

Feb 26, 2010 | Akai PDP4225M 42 in. Plasma Television

1 Answer

Connect DVD to ESA PDP4294LVI plasma tv


coaxial cables are great for HD boxes and usefull components like that but as for D.V.D... dinosaur feed!

get a converter from "The Source" that will convert coaxial analog to yellow component Video and rca audio. and you will be laughing :)


Trust me i am the flat pannel guru! :)

Mar 14, 2009 | ESA PDP4294LV1 42 in. EDTV-Ready Plasma TV

1 Answer

Connecting the cable coaxial cable to a P50HDM VIZIO TV


yea wtf same prob here just want to put a indoor antenna now I got to go buy an external receiver booooooo!

Jan 10, 2009 | Vizio P50HDTV10A 50 in. Plasma HDTV

2 Answers

Broken coaxial


If you are comfortable doing some small repair work, you might be able to fix this with stuff you have laying around.

All you need is:
1 - 8" piece of coaxial cable with male connector on one end
1 - set of RCA cables (Red/White/Yellow)
1 - coaxial coupler
2 - small wire nuts

electrical tape

Take the back housing off of your TV. You may have to unscrew the small nut holding the threaded connector to the TV. This threaded connector should connect to the motherboard with a male RCA prong that should be soldered to the component on the motherboard. You will need to carefully cut
& remove the old soldering & wiggle the connector off. This is the hardest part, but it WILL come off with a little trying.

Now get your coax cable and strip off about 2" of the black outside housing ONLY. Your solid copper` interior cable should be protected by a small plastic coating which is covered in braided wire. You'll need to be careful not to cut the braiding off. Untangle the braiding down to where your cut stops and try and get it all on one side of the cable so you can twist it all together and make a nice wire. Now strip about an inch off of your interior plastic sheathing to reveal the small solid copper wire on the very inside.

Get your RCA cable and cut about 6" off of the one yellow side. Follow the same process above to get a braided sheathing wire and a solid copper wire. Attach this yellow wire to the coaxial cable by twisting the two braided wires together and the two solid copper wires together. Use your wire nuts & electrical tape to secure your connections making sure none of the wires can touch each other.

Connect the yellow cable's male prong into the component on the motherboard and attach your coaxial coupler to the male end of your coaxial cable. If you saved the small nut from earlier, you can re-attach this new coupler to the housing on your TV. Screw your housing back on the TV and you should be good to go.
5669d4e.jpg

Nov 10, 2008 | Samsung LNT4066F 40 in. LCD Television

1 Answer

Picture, No Sound from HDTV Box


CON-YOU'VE DIAGNOSED YOUR OWN REPAIR.GET A NEW CABLE BOX.JOE TV

Apr 20, 2007 | Panasonic TH-42PX500U 42 in. Plasma...

Not finding what you are looking for?
Sony BRAVIA KDL-52W3000 52 in. LCD Television Logo

439 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Flat Panel Televisions Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Paul Bade

Level 3 Expert

1392 Answers

Are you a Sony Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...