Question about Televison & Video

1 Answer

Need value of r607 and r610 sanyo model ds31650

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Look at the colour of the rings and try this website:
http://www.csgnetwork.com/resistcolcalc.html
or http://www.samengstrom.com/nxl/3660/4_band_resistor_color_code_page.en.html

It will calculate the resistor values for you.

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

Posted on May 22, 2008

  • Swilin Sampson
    Swilin Sampson Jun 01, 2008

    Hello,





    This thread has gone 7 days or more without a response.
    Please close the thread with a “FixYa” or “Helpful” rating.





    Or post back with latest developments, what steps you took,
    etc. and I will assist you further as best I can.





    Thank you.


    IrishDruid




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I NEED THE TV SANYO CODE


I need yu repair my tv sanyo model DP46840 my phone 949 454 0130

Feb 03, 2011 | Sanyo Televison & Video

Tip

Hitiachi Convergence Circuit Resistor Values


This site has been very helpful in diagnosing and repairing my Hitachi 57XWX20B. I recently changed the IC's and a resistor to fixe a convergence problem and had to use the small button on the convergence circuit to get set to return from static mode and enter dynamic mode. I searched everywhere trying to locate the correct resistor values and noticed many other's needing the same information. Here are the results of my research. I obtained some from manuals and others from comparison of the different models. My main focus was finding the values for the 57XWX20B. The resistor values are given in ohms at 1 watt. This means RK42 is a 3.3 OHM 1 watt resistor. RK58 was the problem in my set. It was giving a value of 2.3 and needed to be 4.7. I first replaced the IC's and thought the resistors were all good, but I later noticed my convergence was off. I could manually align it but the magic focus initiation would not save. It gave an overflow error. I bought the sanyo brand of IC's, not the cheap inports and found that if you use a desoldering wick then the repair is easy. The new IC's restored the beautiful color the set had when new. Now it is brilliant as well as converged. My repair cost was:
STK-110 13.00 Bought from local electronic supplier
STK-150 15.00
RK58 3.00 Bought from a local TV repair shop

The elecronic supply store gave me 6 inches of desouldering wick
Total cost: 31.00 Dollars

51UWX20B DP23
57UWX20B DP23
51GWX20B DP23G
57GWX20B DP23G
43FWX20B DP24
51XWX20B DP23
57XWX20B DP23
51SWX20B DP27
57SWX20B DP27
65SWX20B DP27
57TWX20B DP27D
65TWX20B DP27D

DP 23 DP 24 DP 27 RK42 3.3 3.3 3.9 RK46 2.2 1.8 1.8 RK50 2.7 3.3 2.7 RK54 1.8 1.8 1.8 RK58 4.7 4.7 4.7 RK62 2.7 2.2 2.2

on Apr 02, 2008 | Hitachi 57SWX20B 57" Rear Projection...

1 Answer

Does my Sanyo TV Model Number DS31650 need a converter box?


As long as you have either cable or satellite, you will be OK. The change coming in Feb. is for people who still use an outside antenna( rabbit ears). Please take time to rate this response. Thanks

Dec 07, 2008 | Televison & Video

1 Answer

Question regarding toshiba 42h82 not 42h81


This is like a quiz right?? Let's see ;;;;;;; by convergence resistors I assume you mean the yoke return resistors out in front of the amps. There are 6, in the 2.2ohm 1w range, easy enough to find. The value of the convergence amps, that unit uses two stk392-110 Sanyo original Ic's rated at 6amps. You can use stk392-150's or stk392-180's just a higher amp rating. The two pico fuses in that circuit are F851 and F852 respectively.
Hope I get an "A"
Bill

William Rayburn, CET
Premium Technologies
PO Box 442
Long Beach, WA. 98631
360-642-4993

Sep 24, 2008 | Toshiba 42H81 42" Rear Projection...

1 Answer

Which code for sanyo tv?


the codes for a sanyo TV are depending on the manufacturer of the universal remote. Need the make and model number of your remote in order to supply the codes you require.

Apr 10, 2008 | Televison & Video

1 Answer

Blue converge unable to adjust. what is stk? and where is it located?


STK refers to a Sanyo style Ic, in this case your Tv takes a STK393-110 at board location Ic8c00 Mits p/n# 267p155010.
If you don't buy from MDEA make sure to get Sanyo originals from a trusted distributor like ACME Enterprises in Florida. If you're going to attempt this youself you'll also need a good soldering station (like a wes50), a DMM, some heat sink compound and alot of patience.
Use the DMM to test the value of the low ohm resistors that feed those amps. In this case, blue being bad, my guess is you'll find R8c21 & R8c22 (3.9 ohm 1 watt) changed in value or nearly wide open. But check all the 3.9 ohm resistors in that circuit.
The STK393-110 is a multi-layer / multi-pin Ic on a large aluminum heat sink. You'll want to have the patience of Job to extract and insert the new one. Bend the pins too badly and it can make the task ten times more difficult.
Don't hold the solder tip on these too long and don't be in a big hurry to solder them all in one sitting. Solder and couple and give it a few seconds to dissipate heat...
Hope this helps!
Bill

Nov 17, 2007 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Blue converge problem


STK refers to a Sanyo style Ic, in this case your Tv takes a STK393-110 at board location Ic8c00 Mits p/n# 267p155010.
If you don't buy from MDEA make sure to get Sanyo originals from a trusted distributor like ACME Enterprises in Florida. If you're going to attempt this youself you'll also need a good soldering station (like a wes50), a DMM, some heat sink compound and alot of patience.
Use the DMM to test the value of the low ohm resistors that feed those amps. In this case, blue being bad, my guess is you'll find R8c21 & R8c22 (3.9 ohm 1 watt) changed in value or nearly wide open. But check all the 3.9 ohm resistors in that circuit.
The STK393-110 is a multi-layer / multi-pin Ic on a large aluminum heat sink. You'll want to have the patience of Job to extract and insert the new one. Bend the pins too badly and it can make the task ten times more difficult.
Don't hold the solder tip on these too long and don't be in a big hurry to solder them all in one sitting. Solder and couple and give it a few seconds to dissipate heat...
Hope this helps!
Bill

Nov 17, 2007 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

The pictures colors do not line up


The convergence amp(s) need to be replaced. Your unit takes two STK392-110 Sanyo built amps. In addition all the low ohm resistors should be tested for change in value and replaced as needed... Not an expensive repair for a qualified shop. We do four or five a week...
Bill

Oct 24, 2007 | Toshiba TP50H95 50" Rear Projection...

7 Answers

Tried convergance, but would work


probably need to replace the convergence ICs inside the TV. The Ic is about 2" x 3" and mounted on large aluminum heatsink. Usually 2 or 3 (depends on model)

Jan 20, 2007 | Mitsubishi VS-55609 55" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69745 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...