Question about Panasonic KX-FPG391 Plain Paper Thermal transfer Fax

3 Answers

How to continue using device as answering machine but route fax to new HP all in one

I want to continue using the device as my answering machine. But i've recently bought a HP 7580 and want to route faxes in and out through it INSTEAD of the Panasonic machine. I've hooked up the printer into the fax but can't figure how -if any way- to bypass the Panasonic wanting to get the fax.

Posted by on

3 Answers

Greetings,
Here is how you can turn off the auto answer on the fax machine.
Set the fax machine to TEL mode by pressing
{AUTO ANSWER} repeatedly to display the following. TEL MODE L The {AUTO ANSWER} indicator turns OFF.
Take Care
-WN

Posted on May 22, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

You can probably call your telephone company and ask them to assign a new number for your HP 7580 fax. Have it connected to a different telephone outlet from the PANASONIC.

Posted on May 22, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

Hook the answering machine after the fax and set the fax to answer after 4 rings and the machine after 5.

This option should be somewhere within the menu of the HP

Let me know if you can't find it

Posted on May 22, 2008

  • Benjamin Patri
    Benjamin Patri May 22, 2008

    Woops I guess I had it backwards the fax should be set for more rings than the answering machine. Here is a part from your manual

    Set the number of rings before answering
    If you turn on the Auto Answer setting, you can specify how many rings occur before
    incoming calls are automatically answered.
    The Rings to Answer setting is important if you have an answering machine on the
    same phone line as the device, because you want the answering machine to answer
    the phone before the device does. The number of rings to answer for the device
    should be greater than the number of rings to answer for the answering machine.
    For example, set your answering machine to a low number of rings and the device to
    answer in the maximum number of rings. (The maximum number of rings varies by
    country/region.) In this setup, the answering machine answers the call and the device
    monitors the line. If the device detects fax tones, it receives the fax. If the call is a
    voice call, the answering machine records the incoming message.
    To set the number of rings before answering via the control panel
    1. Press Setup.
    2. Press Basic Fax Setup, and then press Rings to Answer.
    3. Enter the appropriate number of rings by using the keypad, or press the left or right
    arrow button to change the number of rings.
    4. Press OK to accept the setting.

    you may download the manual at the following link

    http://h10032.www1.hp.com/ctg/Manual/c00...


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I set up my answering machine with my hp 2140 fax


Use the fax setup wizard from the HP toolbox , when it asks if you have an answering machine connected to the fax line say yes. Or setup a distinctive ring from you phone company and set the fax machine to answer double rings only. Use fax setup wizard to do this as well.

Jun 14, 2011 | HEWLETT-PACKARD HP 2140 Fax

1 Answer

Hp officejet 6500 instructions for receiving a fax? Thanks


You can receive faxes automatically or manually. If you turn off the Auto Answer option, you must receive faxes manually. If you turn on the Auto Answer option (the default setting), the device automatically answers incoming calls and receives faxes after the number of rings that are specified by the Rings to Answer setting. (The default Rings to Answer setting is five rings.)
If you receive a legal-size fax and the device is not currently set to use legal-size paper, the device reduces the fax so that it fits on the paper that is loaded. If you have disabled the Automatic Reduction feature, the device prints the fax on two pages.
NOTE: If you are copying a document when a fax arrives, the fax is stored in the
device memory until the copying finishes. This can reduce the number of fax pages stored in memory.
This section contains the following topics:
• Receive a fax manually
• Set up backup fax reception
• Reprint received faxes from memory
• Poll to receive a fax
• Forward faxes to another number
• Set the paper size for received faxes
• Set automatic reduction for incoming faxes
• Block junk fax numbers
• Receive faxes to your computer (Fax to PC and Fax to Mac)
Receive a fax manually
When you are on the phone, the person you are speaking with can send you a fax while you are still connected. This is referred to as manual faxing. Use the instructions in this section to receive a manual fax.
NOTE: You can pick up the handset to talk or listen for fax tones.
You can receive faxes manually from a phone that is:
• Directly connected to the device (on the 2-EXT port)
• On the same phone line, but not directly connected to the device
NOTE: The automatic document feeder must be empty to receive a fax. If there are documents in the ADF, then the device will not be able to receive incoming faxes.
To receive a fax manually
1. Make sure the device is turned on and you have paper loaded in the input tray.
2. Remove any originals from the document feeder tray.
NOTE: The automatic document feeder must be empty to receive a fax. If there
are documents in the document feeder, then receiving the fax will be
unsuccessful.
3. Do one of the following to answer a fax manually:
• Set the Rings to Answer setting to a high number to allow you to answer the
incoming call before the device answers.
• Turn off the Auto Answer setting so that the device does not automatically
answer incoming calls.
4. If you are currently on the phone with the sender, instruct the sender to press Start on their fax machine.
5. When you hear fax tones from a sending fax machine, do the following:
a. Press START FAX Black or START FAX Color on the device control panel.
b. When prompted, select Fax Receive.
NOTE: Depending on your country/region, the device might receive the fax
automatically when you hear fax tones from the sending fax machine.
6. After the device begins to receive the fax, you can hang up the phone or remain on the line. The phone line is silent during fax transmission.

Jan 30, 2011 | HP 1250 Plain Paper Thermal Inkjet Fax

1 Answer

How do i connect my hp 1240 fax\printer to my computer


The fax must be connected directly to the wall phone jack. Connect any other phone line devices, such as a telephone or answering machine, to the phone jack on the back of the fax


The phone line cable used to connect the fax must be a two-conductor (wire) phone cable, like the one that shipped with the fax. The fax may fail to send or receive faxes if the phone cable has more than two conductors. To determine how many conductors the phone cable has, look at the end of the cable. Most phone cable connectors are clear and you can see the number of wires

The Rings to Answer setting determines how many times the line will ring before the fax answers. Follow the steps below to change the rings to answer setting.
  1. Press Setup , press 3 , and then press 3 again to access the Rings to Answer setting.
  2. Press the Right Arrow to scroll through the available settings. When the desired number of rings is shown in the display, press OK .


To receive faxes manually, follow the steps below.

  1. Answer the phone like you normally would a telephone call. If the incoming call is from a fax machine, you will hear beeps or fax tones.
  2. Press either Start Black or Start Color to begin receiving the fax.
  3. Hang up the phone.

Jan 15, 2011 | HP 1240 Plain Paper Inkjet Fax

1 Answer

My hp 1040 will not pick up fax after the fifth ring answering machine picks after forth ring can't tell the between phone call or a fax used to before changed date on answering machine fax quite working


Set rings to answer
You can select the number of rings that will occur before the fax answers an incoming call. If you are using your machine as both a telephone and a fax machine, we suggest you set the ring count to at least 4 to give you time to answer.
TIP: HP 1050 Fax: The Toll Saver function for the Digital Message Center interacts with Rings to Answer. See Toll Saver on page 40. If you have the HP 1050 Fax and have Toll Saver turned on, set the Rings to Answer to 2.
1. Press Menu repeatedly until BASIC FAX displays and press Start/Enter.
Rings to Answer will display.
2. Press Start/Enter.
3. Enter the number of rings you want (2-7) and press Start/Enter.
The HP Fax rings the set number of times and then answers. It then produces a different sounding ring to alert you to which type of call is incoming.
• The additional ring may occur once for a fax call
• The additional ring occurs 5 times for a voice call. After the 5 additional rings, the answering machine will answer.

Dec 08, 2010 | HP 1040 Plain Paper Inkjet Fax

2 Answers

I can send a fax, but can not retrieve. Line continues to ring,


Press the START button while it is ringing. Scroll through the menus and set your machine to AUTO RECEIVE.

Jan 26, 2010 | HP Office Equipment & Supplies

2 Answers

IT WILL RING BUT GOES TO ANSWERING MACHINE DOES NOT RECEIVE FAX


>first run fax test, press set up go to tools menu then select run fax test,all entries should be pass
>then check your connections, do you have one line or number for your fax and phone?or a separate line or another number for fax and another number for phone?
>let me assume you only have one number for fax and phone..
>check connections, this should be downstream connection, the fax machine using the black phone cord provided by hp should be connected directly to the phone jack using line 1 at the back of the fax and the answering machine or the telephone should be connected to ext 2 or line 2 at the back of the fax...there should be no other devices phone or answering machine connected directly to the phone jack.
>next set rings to answer on the fax machine higher than the answering machine...if your rings to answer on answering machine is 4 rings, set the fax to 6 rings...if it is a voice call the answering machine will pick it up at 4 rings then if it detects that it it a fax tone then it will transfer the call to fax.
>also check if auto answer is on in your fax
>you can check auto answer and rings to answer by pressing set up or menu button on your machine look for it in basic fax settings or advance settings
>also check if your voice prompt for your answering machine is not too short there should be like at least 5 seconds after cutting your message to allow the machine to transfer the call to the fax if it is a fax tone.

Sep 14, 2009 | HP 1040 Plain Paper Inkjet Fax

1 Answer

Can I use as phone/answering machine and fax


no, this machine does not have a message center. the only way is to hook an actual answering machine up to the "ext" jack on your fax. set fax to answer on 1-2 rings, and set your answering machine to answer on at least 4 rings, and set your fax receive mode to "tad" which means telephone answering device.

razors

Feb 09, 2009 | Brother IntelliFAX 4100 Laser Fax

1 Answer

Brother Multi function centre with fax, MFC 885CW we have the setting on F/T, it answers a fax after 2 rings, if a call coming in it keeps ringing, but on callers end it keeps beeping fax noises, callers...


Hi,

I had the same problem using my Brother MFC 8460N fax on the same line as my regular telephone, which has an answering machine.

There was nothing wrong with my equipment. It was a set-up issue. I solved it as follows, and maybe this will be helpful to you:

Here's what I did, step by step:

1. Put your MFC and your telephone near each other, and within reach of a phone wall jack.

2. Go to the fax machine. Take the telephone line with the clip on the end of it that comes out of the fax machine. Put that into the telephone wall jack.

3. Go to the answering machine. Take its telephone line with the clip on the end of it and put that into the BACK OF THE FAX MACHINE. The port on the back of my fax machine says something like EXT TAD which means external telephone answering device.


4. Go back to the fax machine. You'll now need to play around with the menu options for the fax. My Brother MFC shows this stuff in a little screen on the front. Try and find the Fax Setup options. Next, try and find the Fax Receive options. If you do, select something like External TAD fax receive mode. Do not give up, you're almost done.


5. Next, set ring numbers on both devices, the fax machine and the answering machine. I set both devices' ring numbers to 4. I don't know if these are the optimal settings, or what happens if you set them at different ring numbers. I only know that a "4 and 4" setting works for me, and am not inclined to mess with it.

6. Final detail: the setup should be transparent to a voice caller. Someone who is sending a fax, though, might be a little confused IF, like me, they lean over to listen to their fax machine dial and screech, just to be sure it's working. Such a person may faintly hear my outgoing answering machine message before they heard my fax machine's screech kick in. They might think that they had a wrong number, cancel the fax, try again, call me with questions, etc., etc. So I changed my outgoing message to something like: 'You have reached xxx xxx xxxx. To leave a voice msg, please wait for the tone. To send a fax, please continue the transmission and it will be printed. Thank you!'

That's it. Hope this was helpful.

Best,

Wilbere

Check out my listings on http://stores.ebay.com/WILBERE

Aug 07, 2008 | Brother Office Equipment & Supplies

1 Answer

HP 1040


if you dial the number on a regular phon e does it go through or is it busy? can you fax to a different # ?

Jun 30, 2008 | HP 1040 Plain Paper Inkjet Fax

1 Answer

Still can't get fax not to pick up when answering machine is connected.


if you have the fax-575 there should be a TAD setting.

This is the setting you would use if you're using an answering machine on the same phone line as your fax machine.

To set the Recieve Mode :

Press Recieve Mode. The LCD display shows your current selection.

Continue to press Recieve Mode until your new selection appears. After 2 seconds the screen returns to the date and time display, along with your new Recieve Mode setting.


The 4 Recieve modes are Fax Only, Fax/Tel, TAD:Answering Machine, Manual.

Hope this helps!!!

Jan 30, 2008 | Brother FAX-575 Plain Paper Thermal

Not finding what you are looking for?
Panasonic KX-FPG391 Plain Paper Thermal transfer Fax Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5729 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...