Question about Televison & Video

1 Answer

Need a code for a total control 4 universal remote to work with a Dual DVRW-5002 DVD-VHS combo player

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

Posted on May 22, 2008

  • Swilin Sampson
    Swilin Sampson Jun 01, 2008

    Hello,





    This thread has gone 7 days or more without a response.
    Please close the thread with a “FixYa” or “Helpful” rating.





    Or post back with latest developments, what steps you took,
    etc. and I will assist you further as best I can.





    Thank you.


    IrishDruid




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code fo DVD player


I believe you are heading to Remote Control System; if its a universal remote for the DVD player, you need to check from the manual as every name has got its own Code,and also the code may differ regarding to the manufacture of those universal remote.

Apr 27, 2013 | Televison & Video

1 Answer

Need code to program a universal remote!


general process for a universal remote control:

  1. push and hold setup 3 seconds
  2. select the device to control (TV DVD etc)
At this moment TV has to be ON (turn tv on by front panel)
3. continue with remote control pushing power button again and again and again SLOWLY
4. when the tv turns off then press enter to save your code.

Apr 14, 2009 | Televison & Video

1 Answer

Cannot connect a VCR/DVD player to Zenith SY1959Y


you don't need a code for the vcr/dvd combo to work on your tv. You need to make sure you have hooked up the cables correctly. remember that the dvd can be hooked up with the component cabels and the vhs may need to be hooked up thru the tv cable hookup.

Jan 08, 2009 | Hitachi UltraVision CineForm 55VG825 55"...

2 Answers

I need a code # to program my Universal RCA remote for my Prima TV and my DVD player


I own a One-for-All universal remote, and my booklet says the setup code for a Prima TV ( without a built-in DVD or VCR) is one of the following numbers: 0761, 0783, 0815, 0817. I can not guarantee these numbers will work with your remote, but it is worth a try.
I assume your DVD has been attached separately, and not built into the TV. In some cases, you might not need an additional setup code. Once the TV has been turned on, you simply push the DVD button on your remote, to activate the DVD. The instructions which came with your remote and your DVD should provide you with more details. If the instructions indicate that an additional DVD setup code is required, then please respond by telling me the brand name of your DVD.

Jul 04, 2008 | Televison & Video

1 Answer

I can't find a code on a rca universal remote control. the brand is magnavox. it has dvd and vcr all in one


I own a One-for-All universal remote and my booklet says the setup code for a Magnavox TV/DVD/VCR combo is 0821. I do not for sure if this number will work with your remote, but it is worth a try.

Jul 03, 2008 | RCA Televison & Video

1 Answer

I need 3 digit code for tevion universal remote control to make it work on my diamond tv or a code for one for all urc 7540 remote thank u


If you do not have a code for method one or two you can try a automatic scan. This will scan for every possible
code that the device will have.
1 – Turn on the device you want the remote to control. If you are using a VHS or DVD player please make
sure that it is playing a dvd/video before you start.
2 – Press and hold the DEVICE key you wish to program for 3 seconds. The LED will light up upon
Key press and will go off ater3 seconds ,now release the button.
3 – Press and release the PLAY button and the code search will begin. The LED flashes every one second
when a code has been successfully sent.
4 – When your device turns off, press and release the pause button on your URC, the LED will
remain on once pressed.
5 –In order to now turn your device back on press the CH – button on your URC, if it does not respond
then continually press the CH – button in 2 second intervals until your device switches back on.
6 – Once your URC is successfully controlling the device, press and release the EXIT button on your
URC, the LED will flash quickly four times and then go off.

Hope this helps.

Apr 06, 2008 | Televison & Video

9 Answers

Remote code for Coby TV/DVD


If you are a DirecTV or Cox subscriber, you may sync a universal remote to your television using code 1548 or 11548.

These codes are for use with the following Coby television models:
TFTV1022, TFTV1212, TFTV1513, TFTV1514, TFTV1524, TFTV1913, TFTV1923, TFTV2214, TFTV2224, TFTV2617, TFTV3217, TFTV3717, TFTV4717

If the codes do not work, or if you are not a DirecTV or Cox customer, the universal remote control manufacturer is responsible for creating and embedding a Coby-compatible code in the remote control. Please contact your cable carrier or the universal remote control manufacturer for assistance.

Mar 25, 2008 | Televison & Video

2 Answers

Code for universal remote


Especifica que control tienes.

Mar 14, 2008 | Televison & Video

1 Answer

Universal cable company remote control codes


brighthouse remote code for panasonic amolifier to adjust volume

Mar 12, 2008 | Televison & Video

1 Answer

Need code for panasonic remote ( EUR7603Z10 ) for a panasonic 2 in 1 vhs and dvd player ( DMR - E75V )


Hey, here's a link to the user manual for the EUR7603Z10:
http://service.us.panasonic.com/OPERMANPDF/EUR7603Z10.PDF

Pages 7 and 8 have codes for the VHS/DVD players...
If that doesn't work, here's the manual for the DMR-E75V... http://service.us.panasonic.com/OPERMANPDF/DMRE75V.PDF
:)

Mar 12, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69745 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...