Question about Linksys Wireless-G WRT54G Router

1 Answer

Receiving message that route can not detect the modem

Posted by on

  • 2 more comments 
  • apple_gate1 May 22, 2008

    Yes., I'm able to login straight to the modem.

    I called Comcast, and was told that since I'm able to login to the Internet & have internet access when I login straight to the Modem I was told to contact Linksys since the problem is with the router and not the modem.

  • apple_gate1 May 22, 2008

    Well that does not make much sense because the same wire I use that goes from the Moden to the Linksys system works when I plug the wire from my Modem directly to my PC.

  • cbws May 24, 2008

    I have the same problem. I switched lines and computers and the same thing occurs. when I spoke to the tech at armstrong they told me I would have to contact linksys. I even changed the router and the same problem occured.

  • Dung Nguyen May 11, 2010

    are you able to get on line straigh from the modem?

    Sound like a wire problem (from modem to wireless). Try changing wires.


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 230 Answers

New router ???

You will also have to configure the router when first open the box

Posted on May 22, 2008

  • Dung Nguyen May 23, 2008

    Thanks for the Inappropriate. shesh..... if you would have been more clear about your discription know what... whatever.... no need to help you any more.


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Power cord
RJ-11 telephone cable coming from a splitter or the extn. line of your landline phone.
Ethernet cable coming from your Desktop/Laptop connecting RJ-45 port
Most standard ADSL modems have four/five lights in the front :
Power light to indicate electric power to the modem.
ADSL light indicates the status of ADSL sync. When the modem is synchronized with the ADSL line card at the other end of the circuit/loop, the DSL light will be steady green.
LAN light will glow steady green when the modem detects a successful link to a computer or router ethernet port.
ACT i.c. Activity light glows when the modem is sending and/or receiving data on the lan and wan. It will vary between very slow to fast flashing and steady green to indicate lan/wan traffic.

for more help visit CBR Tech Solutions

Feb 08, 2014 | Routers

1 Answer

D LINK DSL-2640B Router's Wireless keeps disconnecting

both modem ip address same please check book the modem and install modem ip different and 2nd

Apr 15, 2012 | D-Link (DSL-2640B) Wireless Router

1 Answer

D Link Router "Does not appear to be working"

I think you should try to reset and reconfigure the router.

Connect your computer directly to the modem and make sure that Internet is working through the modem.
Connect the modem and computer to the router and try to reconfigure it.

See how to setup router

Mar 18, 2012 | D-Link Wireless N 150 Home Router 4Port...

1 Answer

Can i use 3com to sent message to my yahoo mail

No, the router is a device that routes data within a network. It is not designed a email client.
Your email client that is ( yahoo, gmail etc. ) if for sending and receiving emails. Your pc is designed with the Outlook and Outlook express and or Windows live to do this.

Jun 18, 2010 | 3Com OfficeConnect Wireless Router

1 Answer

Incorrect static routes appearing in route table automatically

I have exactly the same problem on a couple of Sraytek 2820vm. Did you solve the problem?

Regards Herbert

Sep 11, 2009 | Draytek Vigor 2910VG Router

3 Answers

WRTP54G not routing

turn the power off for 5 minutes then try.
if still pro let meknow.

Jan 05, 2009 | Linksys Wireless-G WRTP54G Router

1 Answer

Computer stopped receiving wireless router signal

In this order: 1) Turn off all PCs and printers connected to the router. 2) Unplug your router's power cord. 3) Unplug your modem's power cord. 4) Wait for at least 2-3 minutes. 5) Connect the modem's power cord and wait for at least 2-3 minutes. 6) Connect the router's power cord wait for at least 2-3 minutes. 7) Turn on each PC separately and wait until it is completely finished booting before turning on the next PC.

If you still do not have connectivity, read the manual and change the channel of the modem. YOu may be experiencing some RF interference, ie microwave, wireless phone system etc...

Oct 29, 2008 | Linksys Wireless-G Broadband Router

1 Answer

Gfe router


Feb 21, 2008 | GigaFast Ethernet GigaFast EE400-R Router

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers


Level 3 Expert

4331 Answers


Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides