Question about Microsoft MN-700 Wireless Router

1 Answer

Laptop shows excellent connection but pc doesnt show any connection

I have recently reformatted my computer and my wireless connection on my laptop says that it has excellent connection..

my pc
when i go into "view network connections" it just shows a LOCAL AREA CONNECTION and not a wireless connection where as it did before i reformatted, i cant find the software that came with it .. i might need the software for it and driver but i cant find them, does anyone have a link to where i can get them..?

my laptop/ps3
both say there is a DNS error which is due to the router not being properly configured..

does anyone have ideas/ solutions to solving this problem, if you have an inquires about what ive said just reply and i should reply back very soon.

thanks!!!

Posted by on

  • kalpesh jain
    kalpesh jain May 11, 2010

    can yuo tell me that what you are using in the laptop and ps3 it means that usb adapater or wireless lan card .



    and other problem is you have to sure you isp provider give you a right dns value ask to him and configure it

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 64 Answers

You don't need any software to configure your wireless, the manual will show you how, located on line at this address: http://download.microsoft.com/downlo...tion_guide.pdf
good luck and please rate this answer, thanks.

Posted on Jan 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wireless ssid not showing in some laptops and mobiles -dlink router


The D-Link wireless router may have the SSID broadcast turned off.
In this case only computers that have wireless connection to the D-Link will show the SSID.
If you know the SSID you can enter the SSID manually in the wireless card settings in the laptop/computer.
OR
Turn on SSID broadcast in the D-Link wireless settings.

Aug 08, 2012 | D-Link Routers

1 Answer

When i switch on my ADSL modem which is connected thro the dlink wireless router,my laptop shows"No internet access" in the task bar,but the signal zebra-band is visible-excellent signal...


Check your ip settings in your pc and make sure they are set to get dynamically. Also check under wireless lan settings that you have dynamic ip turned on.

Otherwise you will manually have to set your computer ip address to the range set in the router/modem

Oct 23, 2010 | D-Link Routers

1 Answer

I have recently purchased the wire/wireless


What is the Operating system on the laptop ?
If it is XP then in the bottom right hand corner you will find Wireless network connection ( looks like 1 computer monitor). Use that icon to connect to the wireless network.
If it is windows Vista, then in the bottom right hand corner you will find 2 computer monitor icon. Use that icon to connect to the wireless network.
If it is Windows 98/ME/2000 then use the adapter utility to connect to the wireless network.
For MAC you will see the AIRPORT icon at the top.

Check the wireless settings of the router first . Make sure that yopu have all the wireless settings of the router. If you are not sure about the settings, then open the router set up and check the settings.

Click Here
for step by step instructions on how to connect to the wireless network and troubleshooting steps

Jan 05, 2010 | Edimax Routers

1 Answer

CONFIG. NETGEAR ROUTER


did you install the modem software and the router software? you may also want to use the network wizard to see what it tells you. are you wired or wireless at the pc? if a laptop, did you install the wireless connection (either a usb or internal)?

here is how to set up the network. netgear is the same way.

http://lifehacker.com/software/wifi/geek-to-live-set-up-a-home-wireless-network-162754.php

Oct 20, 2008 | NetGear WGT624 Wireless Router

1 Answer

I have tried to install router strait from modem to router to toshiba l30 laptop belkin shows up on laptop showing excellent signal but when i try to go on web it cannot make contact


access your routers administration by right clicking your network icon and using your gateway IP to access http://*gateway*
un - admin pw - (none), admin, public
look at your status in the belkin administration settings and see if you have an ip and gateway for your ISP.  The ip and gatway on your computer is for your belkin.
Try directly connecting the laptop to the router with a cable and see if it's on the net. If it is then you have wireless settings wrong. See belkin.com for more infor about router.
James Mac

Aug 02, 2008 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

Router won't log into it's IP address online


It appears to me that you have everything plugged into the desktop PC. This is not the way that it should be done. Plug the cable modem into the wireless router via the Internet/WAN port. Plug your desktop PC into one of the ports numbered 1-4. Now connect to the router via the wireless connection for the router and you should be able to now connect to the internet with your laptop.
If it still does not work, power down everything in this order: Laptop, Desktop, Router, Cable Modem. Bring everthing up in the reverse order (Cable Modem, Router, Desktop, Laptop) waiting for each device to stablize before moving to the next.
Once you get everything working, turn on your wireless security (WPA not WEP) asap to keep your computers and surfing safe, and to keep intruders off your network.

Jul 20, 2008 | NetGear RangeMax WPN824 Router

1 Answer

Dlink not working on my computer that receives signal


visible & unavailable means that the wireless security settings are not the same on the recently formatted computer, as on the rest of the network.
Open the wireless configuration for any computer that can connect to the network and copy the security settings (wep or higher) to the unconnecting pc
OR
connect to the router by cable from the non-connecting pc, use the web interface at http://192.168.0.1 to read the security settings, and copy the settings to the unconnecting pc

then it will connect

Jun 05, 2008 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Internet Connection breaks


try to reset the router there should be a button underneath or at the back you will need to hold it in for 10 seconds maybe then unplug it then plug it back in see how you get on with that

Dec 12, 2007 | Routers

3 Answers

Wireless Internet Connection


Are the wireless router connected to a network?

Oct 18, 2007 | Gateway Belkin 54g Wireless DSL/Cable...

Not finding what you are looking for?
Microsoft MN-700 Wireless Router Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Justin
Justin

Level 3 Expert

2072 Answers

Are you a Microsoft Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...