My jvc ux-559 micro 5disc dvd audio video component system all the cd drives doesn't work. when i put the cd it says cd read takes 2 minutes it says no cd. what can i do?

Hi,

if you've used the service manual and problem still exists, then might need to have the backlight replaced by jvc directly. You can reach out to them by calling 1 (800) 252-5722. Thank you.

Here is the Service Manual for you to start diagnostics, or just take it to a JVC Service Centre.

https://www.manualslib.com/manual/1074538/Jvc-Ux-S57.html

..

So am I. UX-RC7...did you ever find one?

Hello there,
Well if you are in USA, you are in luck !!!!!
Go here
http://www.jvcservice.com/service/JMdlPrtXrf.asp?PgReq=DspDta&MdlNbr=UX-D66
Capstan Belt

The JVC UX-GN6 disc ejection lock can be toggled on and off by pressing the Stop and Eject buttons on the main unit (not the remote) when the micro-component system is in standby mode. These buttons are on the bottom row on either side of the Down arrow/Input Selection button. See page 4 of the manual, which is available on the product page: http://support.jvc.com/consumer/product.jsp?modelId=MODL028509 . The direct link to the manual is currently http://resources.jvc.com/Resources/00/01/15/99.PDF .

I hope this helps.

Cindy Wells

check cd

Hi .

It's so easy! I hope I can help to You.

For unlock the JVC Cd Disc You only have to put Your Machine in OFF mode and press at the same time the STOP and the EJECT bottoms.
For lock the CD player again You have to do the same process but with the machine in ON Position.

All the best from Spain

Jol Macana

HEY I HAVE JVC- MODEL CA-UXGN6. CAN U PLEASE HELP ME UNLOCK MY CD TRAY. I DO NOT HAVE THE REMOTE....

Hi from Spain!

It's so easy! I hope I can help You.

You have to put in OFF Mode the music machine and when it will be off You have to press at the same time the STOP and EJECT bottom.

If You want LOCK the cd You have to do the same but with the Music Machine in ON Mode.

All the best

Jol Macana

it sounds like the tray has come off the guides a comon problem with kids pushing the tray in rather than pressing the button. if the teeth on the track are ok then it is just a case of opening it up and putting the tray back