a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
set line and dot pixel production vortex model mode and just scan through wichever way is the oopposite ov the way the product is desired t come out C:cd:root:owner:<production_manager>:\'c:desktop.run:/line jet axis(x,y,z).interval<subset(x2,y2,z3)>=756.99/5 cd:c: run paint(jet_axis).internal kernel shell //////fun huh i thinks thats enoght help try that see i dont know if that was dos but the computer loves it works anyway awesome replicator your welcome! hehehehehhehheheh peace out email@example.com ttfn
Sorry, this isn't a solution but I just wanted to mention that I just got an Axis 9 and it is not playing burned CDs either. And I see another problem reported on this site specifically called "my axis 9 wont play burnt cds". What in the heck, Numark? Are all the Axis 9's this way?
if you are not a tech.have one look at your set.change your lens.or the wire ribon that is attached to the body of the lens that leads to the pc board.if that does not work your micro chip is damage replace the pc board.they cannot be repaired as they are duble solder unless you have equipment to do repair on them.good luck.
I am assuming that you are referring to the tower (desktop) as the server while the laptop is the client. While the client can access the server's CD drive, you can not ping the server. A couple of ideas: 1. verify that both server and client belong to the same Workgroup; 2. verify that both server and client have the same Subnet Mask and that their satic IP adds are near each other; 3. Server's firewall settings/configurations does not allow/prevents ping response; and/or 4. the server might be using Zonelab, McAfee Firewall, Microsoft ICF SP2 or some other form of port blocking.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
i have the same problem there but i no how to solve it....
its not hard just go any buy new good quality cds i found that sony work very well with the axis 9s and when your making new cds from widows media player just turn the burn speed down to med speed an best quality you do this by going on the littel drop down menu underneath burn go to more options then it will say burn speed change to med go onto the bottem slider and put that in the middel an it works like a dream
that sounds bad. You will need to get someone to have a look at the decks for you. The fact that both blew sounds like they got a major power surge or are on the wrong mains voltage. check to see that they are setup for operation in your country. Check your mixer for damage also.
Some suppliers of electricity are bound by regulations to keep supply within 5%. When you have a spike that "blows" stuff, they generally know about it and there may be some recourse with the electricity provider. Worth checking out.