Question about Kodak EasyShare CX7430 Digital Camera

1 Answer

Camera won't start Kodak batteries installed

I have a Kodak EasyShareCX7430 I have put in new Kodak batteries
but the camera won't turn on.
Can you help?

Thanks
Barbara

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 198 Answers

Just take off the batteries from the cam and press the power button fr few seconds then reload the batteries back to the cam... everythin wil be rite

Posted on May 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Put in new battery and it won't turn on


Hello, Hard to tell with info given, Try new battery to determine if it is battery related or a camera failure, Batteries are cheaper than camera repairs.

Hope this helps, Russell

Dec 10, 2012 | Kodak EasyShare Z612 Digital Camera

1 Answer

CX7300 Digital camera won't turn on. New batteries get hot after being put in the camera after a few minutes.


No. This camera requires service/repairs, the repairs will be more than this model camera is worth !!!!

Nov 12, 2012 | Kodak EasyShare CX7300 Digital Camera

1 Answer

Kodak c340 won't turn on


Hello Carol, Are these batteries new and name brand ? It sure sounds like low battery power, Those cheap batteries found in some stores do not have the energy to boot a camera even when new out of the package. The camera has a very high demand to start up. I own several cameras that will not turn on with brand new cheap batteries.
Best Regards, Russell

Oct 28, 2012 | Kodak EasyShare C340 Digital Camera

1 Answer

Manual for kodak easysharecx7430


The User's Guide for the Kodak EasyShare CX7430 can be found here:

http://support.en.kodak.ca/app/answers/detail/a_id/18525/kw/manual/selected/true


A PDF version is also available for download.

Mar 11, 2012 | Kodak EasyShare CX7430 Digital Camera

1 Answer

I have Kodak EasyShere V1223 It won,t Turn on, Go


Here are the steps for V1223 no power problems: 1. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera. Please make sure that you are installing a fresh/ fully charged battery c. Turn the camera on. 2. Without the memory card, turn your camera on. (If it works then it?s your memory card that is faulty) 3. Please test with the a different battery If you do not have access to another battery Try these steps instead: Please take the battery out of the camera. b. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the battery. If you camera doesn?t switch on you will need to order a no power repair with KODAK or a new cable. In order to organise your repair or Trade up please Contact KODAK: http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Jan 17, 2010 | Kodak EasyShare One Digital Camera

1 Answer

Will not start - tried new battery - didn't help


Here are the steps:
1. Make sure you will install a new or fully charged battery/batteries into your camera.
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera. Please make sure that you are installing a fresh/ fully charged battery
c. Without the memory card, turn your camera on.

Please also try to upload new firmware:
Connect the camera with the computer.
Turn the camera on.
Click onto the link and follow the instructions.
http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=11647/11660&product=EKN033563

KODAK is very nice if your warranty was just expred or is about to expire. I think the trick is to be as friendly as possible when speaking to the agent.

In order to organise your repair Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Dec 22, 2009 | Kodak Easyshare V1233 12.1MP Digital...

1 Answer

Camera suddenly stopped working--an error message flashed, then camera shut off-put new battery in--nothing happens. (kodak c360)


Usually when the camera shows an error mgs. it needs a repair
However Here are the steps:

1. Make sure you will install a new or fully charged battery/batteries into your camera.Pls. use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Without the memory card,turn on your camera.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 23, 2009 | Kodak EasyShare C360 Digital Camera

2 Answers

My kodak md1063 won;t turn on


replace rechargable batteries with regular AA alkaline and see if it will turn on, if it will you need a new battery pack

Jun 21, 2009 | Kodak EasyShare M1033 Digital Camera

1 Answer

Photos look like they have a pink overexposed wash on them.


This is generally an issue with the imaging chip. I've seen this on other cameras and it's typically been a blown CCD chip (which "captures" the image....) If it's a new or under warranty camera, send it to the manufacturer, if it's out of warranty, it's cheaper to simply replace the camera.

Jun 02, 2009 | Kodak EasyShare CX7430 Digital Camera

Not finding what you are looking for?
Kodak EasyShare CX7430 Digital Camera Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

98921 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...