Question about One For All URC4220 Remote Control
You can find the remote control codes for different brands
of devices from
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the following steps.
Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned
More help for programming your remote can be found here:
Hope that helps! Should you have any further questions, please feel free to post them here.
P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
Thank you for using FIXYA!
Posted on May 22, 2008
Setup Codes for TVs
Admiral 0093, 0463
Advent 0761, 0842
Akai 0702, 0030, 0672, 0812
America Action 0180
Apex Digital 0748, 0765, 0767
Audiovox 0451, 0180, 0092, 0623
Bell & Howell 0154
Broksonic 0236, 0463
Cineral 0451, 0092
Citizen 0060, 0030, 0092
Crown 0180, 0672
Crown Mustang 0672
Curtis Mathes 0047, 0054, 0154, 0451, 0093,
0060, 0702, 0030, 0145, 0166,
Daewoo 0451, 1661, 0092, 0672, 0623
Durabrand 0178, 0180
Emerson 0154, 0236, 0463, 0180, 0178,
Fujitsu 0683, 0809
Funai 0180, 0171
GE 0047, 0051, 0451, 0178, 1147,
Gateway 1755, 1756
Gibralter 0017, 0030
GoldStar 0030, 0178
Hello Kitty 0451
Hitachi 0145, 1145
Posted on Mar 21, 2009
I need the code for a "one for all" brand of remote control to be able to use on a sony trinitron model no. kv-2780R
Posted on Sep 27, 2010
I need the code to program my t v with my universal one for all remote control
Posted on Dec 19, 2008
SOURCE: i need the code for a celera tv
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
5. To lock in the code, press and release SET.The LED will
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:
Posted on Dec 12, 2007
SOURCE: urc 3220
I was looking for hours online, I looked on these kinds of sites at least twenty times and tried all the suggested codes and websites and it didn't work, but I finally used 0171 for my URC-3220 universal remote control and it worked :).
Posted on Dec 27, 2007
Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.
if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
Posted on Dec 30, 2007
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 16, 2010 | Sylvania SRCD227 27 in. TV/DVD Combo
Apr 07, 2010 | Universal Remote Control Remote Control
Feb 07, 2010 | One For All URC4110 Remote Control
Sep 18, 2009 | One For All URC-3300 Remote Control
Aug 09, 2009 | One For All URC4110 Remote Control
Jun 02, 2009 | One For All URC-3021 Remote Control
Apr 10, 2009 | One For All URC-3021 Remote Control
Mar 17, 2009 | One For All URC4110 Remote Control
Feb 16, 2009 | One For All URC4220 Remote Control
Sep 13, 2008 | One For All URC4110 Remote Control
6,831 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: