Question about Jensen JER-321 Remote Control
I HAVE A JENSEN UNIVERSAL REMOTE CONTROL AND I HAVE LOST ME CODES IT IS A JER321 AND I NEED THE CODES FOR MY TV IT IS A ZENITH .
Here is the user manual...this should help...
Here you go...it took a while but I found it cause I ROCK....that'sright say it with me....He...Rocks...hehe...but anyway here is the linkaddress if the link doesn't work...
I hope this helps...good luck and thanks for rating my effort....the Fang
Download the completeuser guide (3257 Ko)
Posted on May 20, 2009
I don't speak english, but, the codes, is here 100% really for JENSEN JER 321 Remote Control
the manual and the codes,
Posted on Oct 11, 2008
Thank you so much
Posted on Jun 01, 2008
These are the codes for Zenith: 0017, 0016, 0092
You can find the remote control codes for different brands of devices from
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the following steps.
Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned
More help for programming your remote can be found here:
Hope that helps! Should you have any further questions, please feel free to post them here.
P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
Thank you for using FIXYA!
Posted on May 22, 2008
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1.Manually turn on the component you want the remote to control.
2.Press and hold the component key (TV, VCR, Etc..) you wish to program. The illuminated ON-OFF key turns and remains on.
3.While holding the component key down, press and hold the ON-OFF key. The illuminated ON-OFF key turns off.
4.After holding down both keys for three seconds, the illuminated ON-OFF key turns back on.
5.Release both keys. The illuminated ON-OFF key remains on.
6.Press and release the ON-OFF key repeatedly until your component turns off. Wait four seconds between each keypress. Each time you press the ON-OFF key, the illuminated ON-OFF key blinks and the next code in the list is sent. This process continues until all of the codes in the Code lists have been searched. If your component turns off, you have found the correct code.
7.Once you have found the correct code, you must save the new code by pressing and releasing the STOP key. The illuminated ON-OFF key turns off. You must press the STOP key to save the code or the correct code will not be stored.
Posted on Jan 26, 2008
Tips for a great answer:
Jul 24, 2011 | Jensen 143307 Remote Control
Jul 30, 2008 | Jensen JER-321 Remote Control
Jan 08, 2010 | Jensen JR500 Remote Control
Mar 21, 2009 | Philips Magnavox Learning Universal Remote
Jan 12, 2008 | Jensen JER-422 Universal Remote Control
Dec 09, 2007 | Jensen 143307 Remote Control
1,112 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: