Question about Computer Monitors

3 Answers

X2gen MW19R user manual

I just got the above monitor yesterday, from e-bay. It came in the original box, with everything, including the user manual. It works great. I just want to send the manual to FixYa. It seems unavailable. And one suggestion with this monitor is the power supply. It is rated at 12v. 4amp max.(that is 48 watts max.) The monitor runs at 45watts, kinda too close for me! If it was rated 4a. continuous duty it would be OK, but it's not. The manual is in a PDF file on my desktop looking for a home.
Thanks,
Chuck

Posted by on

  • Anonymous Dec 23, 2008

    I have the X2gen 19VT and would also appreciate a copt of the manual. Please send to everest@Q.com.



    Thanks

  • sjmopar Mar 03, 2009

    Can you send me a copy of your manual? I am having the same problem with my monitor. Send to steve@flashfunding.com. Thanks so much

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I just picked up one of these. I could seriously use the manual. Can somebody email it to gregeck@yahoo.com? Thanks Greg

Posted on Oct 02, 2011

Can you send it to me???? tmill79755@aol.com . I bought the same monitor from e-bay without a power supply (of course). Can I use a 12v/4a generic one??430507

Posted on Sep 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 458 Answers

Maybe they put more volts on it, because of the cable length. About putting the manual on Fixya. I do not know how you would do that. I know that you can have a little more volts and be okay but not enough is bad. Are you sure it is the correct cord?

Posted on May 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After hooking up my Dell to the monitor it displayed a message ! " Out of range ," the monitor then went black . How do I fix it ?


Your screen resolution or refresh rate is set out of limits for the monitor. Check your monitor documentation to determine the correct resolution and refresh rates for the monitor. Then reboot the PC, go into SAFE mode, then re-adjust the display resolution there. Once you reboot after that, the monitor should be fine.

Nov 06, 2013 | X2Gen Mw19r 19" LCD Monitor

1 Answer

My 19 inch x2gen mw19r monitor just went black its still on but wont display a picture so now im using my old tube monitor want to fix the x2gen


titter101, You left out telling us the "DATE of MANUFACTURE" for your unit. You will need to use CRT unit while researching info on x2gen mw19r unit. If unit out of warranty, then you or qualified technician will need to do the investigation and repair of unit. Read the fixya profiles of "budmrtn" , "buddymc" , "12fixlouie" to see if a DIY repair will work for you. 12fixlouie

Aug 16, 2010 | Computer Monitors

1 Answer

Screen goes dark after 1minute, power lite stays on


Possibly the lcd ccfl inverter. Ebay sells universal ones for 9 to 25 dollars each. Monitor repair knowledge needed to replace this part.
It could also be your external power supply if it is not OEM. Or if it failing under a load. If the picture is good when it is on, I always start looking at the power supply and the ccfl inverter/transformer. Please understand I am not an expert on LCD's I just seem to get lots of failing ones. ---Hope this helps.

Jul 25, 2010 | X2Gen MG19MY 19" LCD Monitor

1 Answer

My x2gen mw19r monitor keeps turning off i will hit power on and it will show picture for one second then turn off then turn back on and keep doin that unless i hold the power button to off


Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses, poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Jun 10, 2010 | X2Gen MW22U Monitor

1 Answer

Mn x2gen monitor will not power up. The power supply's led is illuminated. The light on the power button is very dim. Model #MW19R


Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses, poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Jun 10, 2010 | X2Gen MG19MY 19" LCD Monitor

1 Answer

My X2gen MW19R monitor goes to black while I am working. I have checked the connections and they seem to be tight. What is causing this to happen? When it happens I turn the screen off, then back on to see...


It is most likley the cfl tubes - and - or - the inverter is bad. This will happen sooner or later with all lcd monitors that do not have the L.E.D. back lights. It is very frustrating and timely to replace the items yourself unles you absolutly know what you are doing. You should replace the inverter board with the tubes - it is recomended. I see this problem all the time. Samsung has the L.E.D. backlight and not cfl. The total cost of the DIY [ do it yourself ] will bee about $9.00 per tube [ most use 2 - some have 4 ] and about $15.00 for the inverter board - again - the inverter board could be higher if it uses 4 tubes and prices do not include a hefty shipping fee. Here is a sample link to read and a DIY document with tube sorce.http://store.lcdparts.net/ . Now the prices at this site are expensive - they also cover LCD cfl BACKLIGHT TV's - you can search the web for the proper tube but again - the tubes are like a shop light floresent tube in a really small package and very - very fragile and eay to break. Here is the site and it will explain more for you and guide you along for a reference.http://store.lcdparts.net/ . Once you have figured out a few things - try buying the items elswere . A standard 14" lcd monitor wit 2 tubes and an inverter will cost you a min. of about $50.00 + or - if you shop around. Hope this helped you a little and here is the LCD Backlight Link. http://store.lcdparts.net/ Kevin

Oct 29, 2009 | X2Gen MW22U Monitor

4 Answers

Screen goes black but power light stays on


Hello. I had the same problem with my X2gen 19" (model MW19R)monitor. In my case, the monitor would turn off after 20 seconds or so but the blue power light would stay on as well. I had to replace a high voltage capacitor located in the backlight power supply board. There are 4 blue capacitors on the board which are identical and they are marked as 27J 3KV. Fortunately, I only had to replace one of these capacitors ( it was turning a yellowish brownish color ). Hope this helps.

May 30, 2009 | X2Gen MG19VT 19" LCD Monitor

1 Answer

X2Gen MW19R picture goes out after 5-20 sec.


Hey...Dude,

First of all inspecting all the caps closely...see if any caps has a stress mark like a pluffed on top. Those with a pluffed replaced with the same type of voltages that mark on the side of a caps. Those with no pluffed need to tested with ESR meter to see any leaked. If it leaked replaced those too...
Have fun!

Sep 23, 2008 | X2Gen MG19MY 19" LCD Monitor

5 Answers

X2gen MW19R picture only stays on for one to fifteen seconds...


Dear Chris,

Visually check the component :
Try checking on the power board , may be ESR of capacitor is faulty and power resistor shorted and burnt.

Apr 11, 2008 | X2Gen MG19MY 19" LCD Monitor

Not finding what you are looking for?
Computer Monitors Logo

Related Topics:

766 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computer Monitors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...