Question about Miele Washing Machines

1 Answer

The last rinse to go through the fabric softner, doesn't go through I have a Miele W1966 al the rinses work execpt for the fabricsoftner, I cleaned every outlet incl. the loader for the fabric softner

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

After I cleaned all the inletvalves the red light still flashed, although I always clean the tray for the detergent and fabricsoftner everyweek, thought I's give a last chance,
I rinsed it inside out with water, toke the siphon out and cleaned it, and I think I solved the problem, we will see how it holds for the next washes.
If not I will let you know
Hope this was helpfull, wish I started with this, instead of all the work I did with cleaning the outlet valves on all sides, it would have saved me a lot of work, but since the manual said to do this, well there it is, so I suggest to first clean the tray, instead of starting to clean all the in and outlet,s as the book says.

Posted on May 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water is coming up in fabric softner cup during rinse time front loader


this is normal
water should go thru the softner and into the drum when the machine rinses to introduce the softner to the drum

Dec 05, 2014 | Kenmore Elite 45986 Front Load Washer

1 Answer

Htwp1200doww where does fabric softner go


You have to do it manually. Ugh. See below from manual:

Liquid Fabric Softener (Manually add during rinse cycle)
1. Turn OPTIONS knob to FABRIC SOFTENER
2. Measure liquid fabric softener carefully, following instructions on the bottle, and add during the rinse cycle.

OPTIONS (on some models)
Set this option when planning to manually add fabric softener during the rinse cycle or when you use extra detergent or bleach to clean hazily soiled items. It provides an enhanced rinse.

Oct 04, 2012 | Hotpoint Washing Machines

2 Answers

How to add fabric softner to the amana washer with locking lid


Check and see if there is a cup in the top of the agitator. Some machines have you put it there, turning back and forth during wash doesn't bother it, but the spin to empty the wash water causes the softener to go out through slots in the top of the cup and be held in the agitator. when it stops the softener drains into the tub, ready for the rinse cycle.

May 30, 2012 | Amana Washing Machines

2 Answers

I use zanussi essential. For the last few months the fabric softner did not completely go away and I was left with water in the compartment. No the fabric softner does not go through the wash at all. ...


Zanussi
This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.


Jul 30, 2010 | Zanussi Washing Machines

2 Answers

Fabric softner dispenser


Small brush and plain water. Rub, flush, repeat...

If it's clogged where you can't get a brush, pour very hot water into it. Last resort would be blowing it out with an air compressor...

May 07, 2009 | GE Profile WPRE6100G Top Load Washer

1 Answer

FABRIC SOFTNER TRAY STAYS FULL AND IS NOT RINSEING OUT


HiYa dh1200s

The softener tray needs to be cleaned out or the sensor for this replaced.
Yes, not enough water entering machine so not enough water to rinse out the softner

Please leave a good rating before you sign off.

Mar 29, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

NO FABRIC SOFTNER


The fabris dipencer hose was clug need to remove hose , clean w/ stick not so tight rinse w/ water then assemble .

Jan 09, 2008 | Kenmore 43142 Front Load Washer

2 Answers

Tricity Bendix washer won't take fabric softner in rinsing cycle


Your machine possibly has a defective water inlet valve which is preventing water from entering the dispenser channel to flush the fabric softner into the machine. The inlet valve in inside of your machine right where the washer hoses attach. the solenoid valves on the inlet will need to be checked with a multimeter to verify if they are working properly.

Mar 03, 2007 | Tricity Bendix AW1000W Front Load Washer

Not finding what you are looking for?

Open Questions:

Washing Machines Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Miele Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...