I got hp charger but the nob is lose if i can moving round left then the charger is workig & i buying this charger only 4 to 5 month .but i dont have bill .i know charger warenty & service centre mumbai /navimumbai addrese kindly help me this

Buy a new cable

hope this helps

6 pin socket

6 pin plug

7 pin socket

7 pin plug

5 pin socket

5 pin plug

7 pin socket

7 pin plug

7 pin socket

7 pin plug

7 pin socket

7 pin plug

12 pin socket

12 pin plug

small 6 pin round plug & socket

1 tail, clearance - brown

2 left hand turn - yellow

3 right hand turn - green

4 stop - red

5 electric brakes - blue

6 earth - white

small 7 pin round plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

round socket

large 5 pin round plug & socket

2 left hand turn - yellow

3 earth - white

5 right hand turn - green

6 stop - red

7 tail, clearance, side markers - brown

large 7 pin round plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

7 pin round heavy duty plug & socket

1 earth - white

2 left hand rear , clearance and marker - black

3 left hand turn - yellow

4 stop - red

5 right hand turn - green

6 right hand rear , clearance and marker - brown

7 reverse/auxilary - blue

7 pin flat plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

flat socket

12 pin flat plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

8 battery supply - orange

9 auxiliaries - pink

10 earth - white

11 rear fog lamp - grey

12 auxiliaries - violet

Cold temperatures cause batteries to lose a great deal of current flow. Batteries use chemical reactions to create electric charge. The chemical reactions simply move slower at low temperatures. So, there really is just a minor problem here. I think if you buy a 2amp trickle charger and let it charge your battery at night before a cold morning start you'll find everything satisfactory. the charger will gently warm up and charge the battery. In the morning, the battery will be topped up and ready for a high-performance-required cold start. The charger is much less expensive than a new battery. But if your battery is more than 3 years old, you may consider getting a new one as yours has only about 25% of its life left.

Firstly I would suggest that you check whether the problem is really with the charger or the Dc9099 Battery itself. All rechargeable batteries deteriorate over time, especially if they are left fully discharged for a long time or are frequently left on charge for extended periods.
If you have a spare battery try charging that.
You can test the charger itself with a digital multimeter (electrical test meter). 1) plug in your battery charger to mains supply and switch on. 2) Set the scale on the test meter to 200 volts DC Voltage (V--) 3) Insert the test meter probe wires in the sockets on the meter marked "Com" (black) and "V/Ohm (red) 4) Touch the other ends of the probes onto the metal contacts on the charger. It doesn't matter which way round you do it
If the voltage reads in the region 20-25V (will be either + or - depending on which way round you place the probes on the contacts )the charger is probably working okay.
If you have a battery charger that is for US Voltage (110)volts you can buy a 240V-110V step down converter quite cheaply here. http://cpc.farnell.com/_/mw2p-045/45w-230-110v-ac-ac-adaptor/dp/PW00942?crosssellid=PW00942&crosssell=true&in_merch=true&

Set the date and time:
The current date and time are shown in the display when the machine is on and ready for use (Ready mode). The date and time will be printed on all faxes you send.
1. Press Menu.
2. Press Left Right Arrow to choose SET DATE & TIME and press Start/Enter.
3. Press Start/Enter when the display shows Date Format.
4. Press Left Right Arrow to select either Europe (day month year) or USA (month day year) and press Start/Enter.
5. Press Start/Enter when the display shows Date & Time.
6. Set the date and time. You can move the cursor by pressing Left Right Arrow.
7. Press Start/Enter when the date and time are correct.
1-AM 2-PM will display.
8. Press 1 or 2.

1. Take the battery out of the laptop & try to turn on the laptop using power adapter only. If the computer turns on, then the battery is defective & needs to be replaced.
2. Make sure the power adapter is not defective. Test the output voltage of the power adapter using a voltmeter. Compare the voltmeter reading to the nominal value written on the adapter or the laptop.
3. Make sure the DC jack is not loose or broken. A loose DC jack will need to be re-soldered. A broken one will need to be replaced.
4. If you have another processor which is compatible with your laptop's model, try swapping processors & test to see if the laptop will work.
5. The power button could be bad.
6. The motherboard could be defective & needs to be replaced

MAYTAG is AWFUL....READ REVIEWS before buying..If I only knew.Another thing Thanksgiving time,all the cooking,company & dishes,I have to hand wash after 3 says of prepeing food.WTF!!!
I am not soo happy at this time.It worked fine after a strugle to get it started & now the next load it's dead as ever.It has the lights lit dim but nothing else will go.I tried everything & cant even read the manuel on it since maytag charges for a viewing of there 5 month old product's manuel. I lost my manuel on mine & refuse to pay to read up to see if there is a reset button.I paid enough for this 5 months ago & it was only installed 4 months new! how's that for crappy appliance not to mention my lemon of a washer i got a few years ago.I see maytag has shittttttttyyyy appliances now when they use to be on top! I's ratehr buy a generic brand for less since it's got more of a warranty to offer.This here buy one or you lose as I & a millioon more..READ the REVIEWS Millioons of us been screwed & this economy who has it to cough up? NOT I !
Have a blessed Thanksgiving everyone ~~ Mine will only get better once I replace my appliances to a more trusting brand & with assurance of a better brand,I dont think I'll have this dealing in a short 4 to 5 month time frame & to mention again on a holiday tons of dishes.I want my money back in triple damages from all this stress
So posting my solution is DON'T BUY MAYTAG

that tool is under warrenty whoever u bought it from should have it fixed. did u try to adjust the air flow on your forard and reverse by turning the nob right or left has numbers on it hold the trigger turn the nob i see what it does i rebuilt many a 261

IT IS VERY EASY TO REMOVE THE PAPER JAM. YOU JUST SEE THE BACK OF THE PRINTER A WHITE COLOUR ROUND NOB IS LOCATED JUST UNLOCK THAT NOB (LOCK AND UNLOCK ICON IS SHOWN BESIDE) PULL THE DOOR SLOWLY OUTSIDE REMOVE THE PAPER JAM GENTLY.THEN AGAIN FIT THE DOOR AS IT WAS AND REWIND THE NOB TO LOCK IT .DO THIS CAREFULLY AND U WILL GET SUCCESS.

try to un-install and re-install the printer driver/softwae