Question about NorStar Meridian M7310 Phone

2 Answers

Conference Calls/Transfer There is no instruction section in the manual for this specific feature. The conference calls/Transfers...does anyone know how to do this? The button says : Conf/Trans

Posted by on

  • Anonymous Mar 27, 2014

    I need to learn how to transfer multiple people on a conference call

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 192 Answers

Conference [Feature] [3]

  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call

  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)

Posted on Mar 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

HOW TO CLEAR THE ERROR REORDER TONE WHEN I PRESS LINE 001 FOR DIALING

Posted on Aug 26, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot make conference call does my phone has that facility model #CS6229-2


The VTech CS6229-2 - cordless phone has a two handset systems provide the convenience of operating two handsets using only one phone jack and one base station. The second handset simply needs an electrical outlet to plug into. These systems also allow you to transfer calls, conference an outside call or use the intercom feature between handsets.
Here's an online instruction manual for your guide: http://www.manualowl.com/m/Vtech/CS6229-2/Manual/196794

Jun 28, 2011 | Vtech i5866 Cordless Phone

1 Answer

How do I use the conference call feature? Thanks so much. I need to make a conference call in an hour so I'd appreciate a response asap!


Here's a link that has your manual which should give you specific instructions for conference calls.

http://www.retrevo.com/support/Panasonic-KX-TG2740S-Telephones-manual/id/1074ci771/t/2/

Jan 12, 2011 | Panasonic KX-TG2740 Cordless Phone

1 Answer

How do I identify extensions, transfer calls, conference call, change time.


To identify the extensions: if its a display set, press feature 00 and the screen will show the extension number. press feature 00 to exit programming.
If its a non-display set access the intercom and call a display set.The extension number will be displayed on the screen that is recieving the call.

To transfer a call: while your on the call to be transfered, press the transfer button and then the extension number of the person you wish to transfer the call toand hang up.

For a conference call:while on the line with the first caller,press the conf key (the caller will be placed on hold) place a call to your second party when they answer press the conf key again. all 3 parties will be bridged(you + the 2 lines) to get rid of one of the callers press thier line and feature 6 (conference drop)

Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#103"
the display should say system time and the current programmed time
enter the new time in 24 hour format
press feature "00" to logout

Jan 05, 2010 | AT&T Lucent MLS-12D Phone

1 Answer

HOW TO DO A CONFERENCE CALL


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]


  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

May 14, 2009 | NorStar M7324 Telephone

1 Answer

Call conferencing


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]


  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

May 11, 2009 | NorStar Meridian M7310 Phone

1 Answer

Unable to use conference button


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]
  • Establish a conference call between yourself and two other parties.
    1. Make or answer the first call.
    2. Put the first call on hold.
    3. Make or answer the second call.
    4. After the second call is connected, press [Feature] [3].
    5. Press the line or intercom button of the first held call.
    6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Mar 11, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

I have a NorStar M7310 phone -I am on a conf call - how do I mute the line where the other parties cant here


Conference [Feature] [3]


  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call


  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Dec 04, 2008 | NorStar M7310 Corded Phone

1 Answer

Time restriction on conference calls.


If this hasn't been solved, I am a certified Vodavi tech. Give me a call

Oct 29, 2008 | Vodavi Starplus SP7314-08 Corded Phone

2 Answers

Conference Calls


  • Take/make the original call
  • Press CONF button on the upper right
  • Press the extension number on the left of the person you wish to conference in
  • When they answer press the CONF button again TWICE to add them to the concall

Sep 15, 2008 | Samsung Prostar 824 Keyset Telephone

1 Answer

Conference Calls


To establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press feature button then 3.
5. Press the line or intercom button of the first held call (not required on the
T7100/M7100 telephone).
6. Press Release to end the conference call.
To remove yourself from a conference permanently
(unsupervised conference):
Press feature buton then 70. The other two callers remain connected. (Some
external lines may not support this feature. See your system
administrator.)
To put a conference on hold:
Press hold. The other two callers can still talk to each other.
To split a conference:
Press the line or intercom button of one caller to consult privately while
the other caller is on hold. To re-establish the conference, press
feature button then 3.
To disconnect one party:
Press the line or intercom button of the caller you want to disconnect,
then press Release button. Press the line or intercom button of the remaining
caller to resume your conversation.

Aug 22, 2008 | Nortel T7316E 2-Line Corded Phone

Not finding what you are looking for?
NorStar Meridian M7310 Phone Logo

Related Topics:

1,742 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Phones Experts

kakima

Level 3 Expert

96417 Answers

dan4261

Level 1 Expert

14 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a NorStar Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...