Question about Uniden Cordless Phone
Sir, The phone and base are the same. I have good dial tone. When I go to dial out, the tone never changes and the call does not go through. I cannot receive incoming calls, even though the phone rings.
check the phone switch, if it is on a pulse tone or in dial tone..
Posted on May 26, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: UNIDEN 5.8 GHZ CORDLESS PHONES
Registering Handsets to the Base
Whichever handset you choose to charge in the base is automatically
registered to the base. Any additional handsets must also be registered to
the base before you can use them.
Be sure both handsets are fully charged.
One at a time, place each handset in the base. The charge/in use LED on
the base begins to flash, indicating the base is registering the handset.
Wait for at least five seconds, then pick up the handset and press
[talk/flash]. If the display shows TALK, the handset is registered. If not,
place the handset in the base to try again.
Press [end] and continue with the next handset.
Once both handsets are registered, it doesn’t matter which
handset is placed in the base or the charger.
When you charge the handsets, Caller
ID summary screen and the name of
the handset appears.
This can be find from uniden website.
Posted on Jul 08, 2008
Hi peddler65, did you plug your phone into another area to see if there is a dial tone. Then if not call the phone company or find the D-mark (where your dial tone ) comes into your home and put a jack on that and plug a phone in with all phones
in the house unplugged.
Posted on Nov 15, 2008
SOURCE: uniden 5.8Ghz phone.
You need to reset the main base unit. Unplug the power from the back of the base. While the power is disconnected, press and hold the delete key while reconnecting the power. Wait for a long beep tone. When the display shows 88 or P, press play button one time. If you have a phone without an answering machine, disconnect the power from the back of the base, press and hold find hs button while reconnecting power.
Posted on Mar 17, 2009
Tips for a great answer:
Mar 23, 2010 | GE Lands Phones
May 28, 2009 | Uniden Cordless Phone
Jul 17, 2008 | GE 25931 Trio Cordless Phone
Feb 18, 2008 | Xact Communication XG2200 Cordless Phone
Feb 06, 2008 | GE Cordless Phone 900 MHz
Sep 29, 2007 | Uniden Cordless Phone
Jan 27, 2007 | GE 900 MHz Phone
427 people viewed this question
Usually answered in minutes!