Question about GE Security DVMRe-16CT-600 16-CHANNEL Color Triplex Multiplexer-Recorder with 600-GB Hard Drive, Ethernet

1 Answer

Installer code I need how I reset the installer code , because I change the default password

Posted by on

1 Answer

Hit menu button, top right of jog, installer code is 3477, then use jog and dial to change settings. These must be done locally!

Posted on Aug 26, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: intaller code

The factory default code to reset the system is 8111, however this will reset all program functions back to the factory settings, with the exception of the time and date. The default Operator code to use the system is enter, enter, enter, enter. This should allow you to operate the system.

Posted on Aug 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lost password h264 dvr


If you had changed the default password that came with your system-

#1. Contact either the manufacturer, installer, or vendor from where you purchased your system from; they should be able to walk you through the steps of how to reset the password to its default.

And then from there, you can change it to the password you want to use.

If you never changed the default password, your user manual will have it for you...in the event you lost the user's / owner's manual, see #1.

Mar 08, 2015 | Night Owl Optics Night Owl LION4500...

1 Answer

I need the default installer's code no for a DAS DL200 alarm system?I have the installer's manual but it does not have the number. The client has moved into a new house with this type of panel and...


The key for the panel is supplied from the distributor and you need to be a certified installer to open an account and buy one, A good old big flat screw driver will open the pannel as well but the lock will be useless after that LOL! (you could screw the dore shut with #6 sheet metal screws after) than you can go on the Ademco's web site to serch for the default code of your alarm panel model but if the installer changed it than you have to reset the panel to factory default and re-program it... (unless the installer activated the installers lock up) than you need the code from the last installer that serviced the panel... if not than you need to send the board to Ademco to have it unlocked or change the board for a new one... (you will still have to re-program everything from scratch...

That's what security is all about!!! $$$$

THE BEST WOULD BE CONTACTING THE LAST INSTALLER FOR SERVICE...

Aug 06, 2011 | Ademco Surveillance Cameras

2 Answers

I accidentally locked myself out of my Smarthhome Securelinc Alarm Installer Code Model OH-41073AT. I would like to reset the unit to my installer code or create a new one. Can you assist?


The first thing to try would be to disconnect the mains supply and remove the internal battery for a minimum of 5 minutes and then reconnect it.

If this doesn't reset the system then remove the mains supply and battery again for another 5 minutes.

After 5 minutes reconnect the battery.

Then with the help of a friend try holding the # & * keys while they turn the mains supply back on.

These are generic resets for most house alarms but I'll keep looking if there's a specific one for your system so if neither of these work just let me know.

If I find anything else in the mean time I'll add to this post.

Jul 06, 2011 | Visonic INC Smarthome SecureLinc Wireless...

1 Answer

How do I reset GE Simon 3 Install Password to Default Password?


You need to reset the entire panel:

1. Open the panel cover
2. Uplug the transformer and disconnect the battery
3.Simultaneously press Cancel, Clock Set and Minutes buttons
4.reconnect transformer with button depressed.
5.Panel say"Hello System XX OK.

Panelis reset,installer code is 4321 master code is 1234

Jul 27, 2010 | GE Security Simon 3 Wireless Home Security...

2 Answers

Hello I have a simon 3 and need to reset the master code, I dont have the old code. What can I do to start using the system again


You can change the master code only if you have the installer code. If you don't have the installer code, the only way I know of to reset the master code is to reset it to factory defaults. This does mean that you will have to completely re-progam the system. I would document as much stuff as you can from the display before resetting it. If you don't have a copy of the installation manual I am providing a link below. Hope this helps.

http://www.home-technology-store.com/assets/PDF/GE/Simon-Install.pdf

Mar 21, 2010 | GE Security Simon 3 Wireless Home Security...

1 Answer

GE Simon - Reset Installer Code & Remove Sensors


I am sure you already guessed this but it appears someone has changed the default installer code. Using the default installer, dealer, or master codes defeat the purpose of a security system as most criminals know the default codes. The only way I know of to regain control of this panel is to reset it to factory defaults. This does mean that you will have to completely re-progam the system. I would document as much stuff as you can from the display before resetting it. If you don't have a copy of the installation manual I am providing a link below. Hope this helps.

http://www.home-technology-store.com/assets/PDF/GE/Simon-Install.pdf

Mar 19, 2010 | GE Security Simon 3 Wireless Home Security...

3 Answers

GE Simon 3 Alarm: Reseting Dealer and Installer Code!!


Here is the manual. See System Programming on page 11 for default codes.

Dec 21, 2009 | GE Security Simon 3 Wireless Home Security...

1 Answer

Installer code doesnt work


you cant reset it once its in an alarm state.  but if you can open the front and enter programing with the installer code, you can change the access codes.

Mar 30, 2009 | GE Security Simon 3 Wireless Home Security...

1 Answer

Intaller code


The factory default code to reset the system is 8111, however this will reset all program functions back to the factory settings, with the exception of the time and date. The default Operator code to use the system is enter, enter, enter, enter. This should allow you to operate the system.

May 21, 2008 | GE Security DVMRe-16CT-600 16-CHANNEL...

1 Answer

Password


Please find the following passwords.

Ten and Sixteen-Channel Units
Password Type Access Level Function Changeable by user?
Default Password Operator Operator Provides access to the Operator and SystemView menus. Press ‘ENTER’
4 Times

Installer Installer Provides access to all on-screen menus. Password 3 4 7 7

Factory Defaults Installer Resets the multiplexer to the factory defaults (except the time, date, email addresses, and email
IP address). Password 8 1 1 1

Language Installer Provides access to the On-screen
Language menu. Password 5 4 1 5

Ethernet Access Reset Installer Deactivates the ethernet
password, so that the unit may be accessed by any PC equipped with WaveReader. Password 1 1 1 1

Jun 08, 2007 | GE Security DVMRe-16CT-600 16-CHANNEL...

Not finding what you are looking for?
GE Security DVMRe-16CT-600 16-CHANNEL Color Triplex Multiplexer-Recorder with 600-GB Hard Drive, Ethernet Logo

591 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Surveillance Cameras Experts

Coss

Level 3 Expert

1043 Answers

Brad Brown

Level 3 Expert

13536 Answers

ka4iup
ka4iup

Level 3 Expert

3944 Answers

Are you a GE Surveillance Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...