Question about Xerox WorkCentre XE60 Laser Printer

1 Answer

The display screen reads "L3"


Hello,

We have a Xerox WorkCentre XE60--- we have tried shutting it off and then on, unplugging it, etc....the display reads "L3".....we use our copyer daily and need a quick fix!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

That is related to the scanner. Lamp, or cable, and to be honest, it would be much less problem to replace the printer. That is a very hard machine to service and that is a difficult problem and can be very expensive to repair.

Posted on May 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xerox 7328 touch screen not taken


Hi,
I share a links, so read it and follow instructions. If not understand then contact printer support technician and check it why your printer touch screen not working.
Read more..http://www.office.xerox.com/latest/W73EG-01U.pdfand Xerox Printer Support

Thanks,

Sep 05, 2014 | Xerox WorkCentre 7328 Multifunction laser...

1 Answer

Hi, I have a Work Centre XE60 that displays an E7 error code. I have reinserted the shipping screw and removed it, but that didn't clear the code. I have also tried the fix #14 from Serox's online...


In reading your question I thought I wrote it! I am having the same problem with my printer and it, too, happened after I moved it without the shipping screw. Have you been able to fix yours? Thanks, CC

Sep 03, 2010 | Xerox WorkCentre XE60 Laser Printer

1 Answer

I need to restore NVRAM from the WorkCentre 2424.


1. From the System Setup menu, go to Information --> Troubleshooting --> Service Tools menu.
2. With the cursor at the top of the Service Tools menu, press both the Up Arrow and Down Arrow buttons to display the Hidden Service menu.
3. Reset NVRAM is in there

If that doesnt work try below.
1. Turn the system power ON.
2. Wait for the Xerox logo to begin moving across the display.
3. Before the logo is centered on the display (stops moving), press and hold the Back and Info buttons on the control panel.
4. Hold both buttons until the display reads 'Beginning Service Mode Initialization'. Release the buttons and the system reboots into service mode with the Service Diagnostics menu displayed. You should find it in the function sub menu.

Jul 16, 2009 | Xerox WorkCentre C2424DN All-In-One Laser...

1 Answer

Xerox Workcentre 24- Paper jam in the fuser


Shut down. Unplug!!! Remove fuser to remove jam. Fuser may be or be going bad.

Apr 22, 2009 | Xerox WorkCentre M-24 Color Copier

1 Answer

H2 Blinking on the panel


Error code means that:
H2 Thermistor Open

Part #
Xerox Workcentre Pro 16FX, Xerox Workcentre XD100, Xerox Workcentre XD102, Xerox Workcentre XD103F, Xerox Workcentre XD104, Xerox Workcentre XD105F, Xerox Workcentre XD120F, Xerox XC1020, Xerox XC1040, Xerox XC820

Mfr Part #: RDTCT0128FCZZ


Xerox Workcentre Pro 16FX, Xerox Workcentre XD100, Xerox Workcentre XD102, Xerox Workcentre XD103F, Xerox Workcentre XD104, Xerox Workcentre XD105F, Xerox Workcentre XD120F

Mfr Part #: CTHM-0019DS52, CTHM-0019FC52

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Feb 21, 2009 | Xerox WorkCentre XD100 All-In-One Laser...

1 Answer

Xerox Workcentre Pro16fx - H4 error code after power outtage


You shut the machine off then on, Press Clear, auto,clear , auto, then when the lights go out, program it as if you were running 14 copies. press start and that should reset it.
Thats the redish pink clear button and the auto exposure button, Clear, Auto , clear auto, and the display goes blank , enter 14 and start. Dont ask me why I repeated that LOL

Feb 02, 2009 | Xerox WorkCentre XD100 All-In-One Laser...

1 Answer

Multifunction restarts repetedly


That is usually a bad main board. You can try removing the memory and reinstalling it...that fixes the problem sometimes. Also unplug your network cable and turn it on...data present when turning on some xerox models will cause problems.

Main Board is part number 140N63141

Jan 15, 2009 | Xerox WorkCentre 4150p - Multifunction -...

1 Answer

Xerox xe80 workcentre prints almost black copies


Hello sir; Just replace drum cartridge, it will take care your problem. GOOD LUCK!

Oct 31, 2008 | Xerox WorkCentre XD125F All-In-One Laser...

1 Answer

Xerox workcentre pe16


Remove the back cover. And looking from the back, remove the right side cover. There is a white ribbon cable and one connector with mostly red wires, remove and reseat those. Return power to the machine and see if it comes on.
If not, then remove the right side cover, the 2 screws that fasten the scanner to the frame, remove the scanner and then the controle consol, ( display.) then unplug all the connectors on the display and reconnect them.
It the display still does not work after reseating all the connectors, the display itself is defective.

Mar 13, 2008 | Xerox WorkCentre PE16 All-In-One Laser...

1 Answer

Xerox workcentre xd120f laser b/w printer


You can download the manual on the following link. How to clear the flashing "P" is on page 14. http://download.support.xerox.com/pub/docs/XD155df/userdocs/any-os/en/newxd.pdf

Aug 04, 2007 | Xerox WorkCentre XD120F Laser Printer

Not finding what you are looking for?
Xerox WorkCentre XE60 Laser Printer Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...