Ok so i have an lg lw75 express laptop and i know its old but it has two users admin and mine and iv tried both but the passwords do not work what can i do so that it goes back to the way that it was when it was first bought eg nothing on it like when i first bought it i no longer have the cds for it i need help

This is one of the hundreds of hits I got.

Notebook Laptop battery LG 2300 e23 LG S1 V1 T1 LW60 LW75 LB52113D in...

Hello,
You can break laptop password, i know two methods to break laptop password.

Method 1: Break windows admin password from DOS command prompt

Method 2: Break laptop password from Windows Password Recovery

Try it...
Restart the laptop and press F8 continuosly,, then you will find the "SAFE MODE" option. Select the "SAFEMODE" then press enter.. Then you will find the "Administrator" user account. Try to login to that Administrator . Try the password as administrator or admin or with none. Try it...

In most cases you need to remove the top bracket with the power-button above the witch is firmly clicked but not screwed down. Do not break this cover!

Under this bracket there are screws from the keyboard. You need to unscrew these and remove the keyboard and gently pull out the flat cable to.

Under the keyboard there are screws that hold the bottom of the laptop you need to unscrew. Sometimes there are some wires from a wi-fi module that needs to be detached.

It's exactly what it says - your user profile is corrupted. Login as admin, create a new user and move all your file to it. Login in the new user, make sure it's ok and all the files are there then rebbot, login again as admin and delete the old user.

First access your router.First connect your router to computer with ethernet lan cable.
You can access your router with following default link.
http;//192.168.1.1
or
http://192.168.0.1
or
http://192.168.2.1
or
http://192.168.15.1
Type user as "admin" and password as "admin" or blank or "password" or "1234" then you can see configuration page of router.
If you are not able to access it with above ip then check your Gateway ip in network adapter property gateway ip is your router ip.
Then in configuration page make sure wifi is enable .
.
Check WEP security and add new code because old code is in * or # format add new code then save settings and restart router.
Then you can connect with that code.

Let me know if you need further assistance.
Thanks for using FixYa.

Hello there:
if you have never set a pawssword on the computer and you are positive of this than just hit the esc key and continue if this does not work boot the computer into the safe mode and go to the user accounts and see if the password option is enabled there uncheck the option for this ok than save and exit and reboot the computer ok and you should be good to go ok? I hope that this has been very helpful for you ?
Best regards Michael

try logging in with the built in admin account

user: admin
password: leave it blank or try password

if that works go to the control panel/users and reset his password there, log off the admin then youll be able to log back into your sons account

let me know, might have to run a tool to remove his password

I just left the user name blank and typed in my password then it worked, the next hurdle for me was to try to register the product which to me is impossible seeing that the website no longer exists and the phone number is no longer in service...

Step 1 Open a web browser and enter the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin and the password is blank (nothing). Click OK. Step 3 Click the Tools tab and then click Admin to the left. Step 4 To change the administrative password, enter a new password in the Admin section. To change the user password, enter a new password in the User section. Step 5 Click Apply then click Continue to save the settings.