I have a dream gear dgps3 1324 wireless controller I can't figure out how to sync it to my ps3

It connects thru bluetooth or sync.

Hello Rickrip
Ok try this
Switch off PS3
Connect USD cable to controller and PS3
Turn on PS3
Turn on Controller.
Hopefully the controller will sync now
Hope this helps

It should sync after connecting it with a cable to the PS3. If not, try turning off the PS3, then holding the PS button on the controller near the PS3. This should detect it and turn on the PS3, syncing the controller in the process.

Connect both to the PS3 using the usb(charging cable for a few minutes) then power on the controller.

1. 1. Turn off your PS3 console and disconnect it from the power supply.
      

   2. 2

      Insert the USB cable provided with your console into an open contoller port. The controller ports are found on the left side of the front of the PS3.
      

   3. 3

      Insert the other end of the USB cable into the back of the wireless remote controller that you want to sync with the PS3.
      

   4. 4

      Reconnect the power supply to the PS3 and turn it on. The wireless remote control should sync automatically with your console. If it does not begin automatically, press the "PS" button at the center of your controller. This will begin the process. Once the sync is complete, you can disconnect the USB cable and the controller will communicate with your PS3.
      

   
   

1. Plug the controller intothe ps3 with the charge cable. 2. When the controller is connected press the ps button in the centre of the controller. 3. The lights will flash for a minute but then it will get assigned a number and then be synced with the ps3. Hope this helps please rate.

The controller comes with a little USB dongle that needs to be plugged into the PS3 controller port before it will sync with the PS3.

i just sync both of mine to my ps3 it was giving me difficult at first, but i noticed the when u first put in ur usb wireless thing it starts to blink really fast and when u push the p3 button on the controller twice it flashes really fast. so i took out the wireless usb thing then put it back in so the light on it would be flashing really fast like it was searching for somthing, then press the p3 button twice to make the lights flash really fast aswell so it will sync with it. Thats how i got both of my controllers synced we my ps3. the lights on on the wireless usb thing and the controller lights must be flashing fast at the same time to sync.

try to plug it in and then press the ps button or let it sit for a little bit while plugged in and then try it

Here's how to connect it tou your ps3. Mine works perfectly guys.

1. Turn your ps3 off without the USB key given with the controller
2. Make sure your controller is off.
3. Turn on the ps3
4. Turn on the controller
5. Press on the sync. button of your controller.
6. Plug the USB key into one of your ps3's port
7. When the light above your controller starting to flash slower, just pess the home button and your controller will be sync.

You can't turn on the ps3 with this controller. So turn it on manually than press the home button of the controller to turn the controller on.

If my post doesn't solve your problem, I really don't know how to solve it. I managed to connect mine so I hope it'll be the same for you!

Sorry for my bad English folks! You know... french people =S