Question about Radio Shack Cinego D-1000 Multimedia Projector

1 Answer

HOW CAN I SETUP PROGECTOR WITH DISH NETWORK?

I NEED HELP IN CONNECTING THE PROJECTOR TO THE DISH NETWORK.

Posted by on

  • shadowisland Aug 02, 2008

    I have dish network and just switched my 57'' hd tv for projector and screen. My new Yamaha reciever has HDMI pass thru. I hooked a Hdmi cable from Dish HD reciever to the Yamaha and then one to the projector. Also put on toslink from dish to reciever. I get sound, but no picture. Any ideas?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 563 Answers

Hi YOLANDAZUNIG

You will have to give me an idea of what outputs your dish decoder has got and what inputs your Projector has got.

Normally you would use the normal RCA ( Video Connection )

You'll see at the back of the decoder there will be 1 with a yellow ring around it - That's video , and another two with red and white rings respectively - for Audio.

Make sure you connect the cables according to colour from the decoder to the Projector.

Posted on May 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Progector stop running evrery 10 min.


it seems like the temperature control is defective,

Have a good day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip,color wheel, motherboard, powersupply ... with high quality and competitive price.
Jerry China Lampdeng Limited
Tel: +86 131788 67858
E-mail: lampdeng@hotmail.com
Skype: lampdeng.com
YM: lampdeng@yahoo.com
http://facebook.com/lampdeng
http://www.lampdeng.com

Feb 20, 2014 | Multimedia Projectors

1 Answer

Acer eprojection management


check out network configure

Apr 17, 2013 | Acer PD726W Projector

1 Answer

I can't get a picture to come up.


Have you gone into your setup menu on the satellite and changed any display settings? My 60" HDTV was doing similar things and i was not able to use picture format on my controller to get fom zoom to wide screen, and so on. I had to go into my dish menu and go to setup then video and adjust some settings to display the TV resolution ratio. I was not in the HDMI connection menu when the new TV was origianlly installed to my DIsh. Also had to do same thing on my PS3 under settings and video output resolution.

Just a thought!

May 29, 2012 | Panasonic PT-AX200U Projector

1 Answer

Can this projector be connected somehow to a satellite dish receiver?


Your Projector has a composite video input and so long as your receiver has composite out on it, they will work very nicely together. All you will need is a screened lead with a phono plug on each end.
Hope that helps.

Dec 29, 2010 | Panasonic PT L735U Multimedia Projector

1 Answer

I forget the password for the projector BenQ Mp620 Datashow


u need to re install the the setup of ur projector through net ..
jus connect to net and run sofware updater , it will refresh ur password ..

Mar 23, 2009 | BenQ MP610 Multimedia Projector

1 Answer

Projector will no show presentation on my laptop


press the input button again to make sure the computer stays linked.

Dec 17, 2008 | Sharp XR-10X Multimedia Projector

2 Answers

Will this projector work for HD TV?


While the projector may attempt to display the HD TV, it will be poor quality if a image is displayed at all.

The native resolution is to low as per the specifications. The resolution needs to be at at leat 480P to be compatble with HD TV.

Jul 22, 2008 | Epson EMP S1 Multimedia Projector

1 Answer

Search won't lock on to source.


Hi,

Below is copy of my post to a similar problem.

This is a fairly common problem with this model. In most instances, it is just "slow" in sensing the presence of a video source as it cycles in its selection, internal DVD, VGA, Composite Video IN. Since it does not have a manual source selection, your only option is to really wait.

Verify that "Auto Source Select" is enabled in the Management Menu (buttons-Proj/Setup then >/9) and "tap" the "SRC" button on the projector itself to manually initiate the input/source selection.

Verify that you have done the connections correctly. Yellow RCA connector is the video while the red & white are the audio. Of course the Video input should be connected to the Video output, same goes for the audio. Please refer to pages 22 & 23 of the user's manual for more detailed instructions as well as illustrations.

A couple of things to consider: it is not HDTV capable and pls don't loose the remote.

If the unit will not select a source after some time (minutes), perhaps your best bet would be to seek replacement.

Hope this be of some help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Dec 23, 2007 | Radio Shack Cinego D-1000 Multimedia...

Not finding what you are looking for?
Multimedia Projectors Logo

Related Topics:

848 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Shack Multimedia Projectors Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

CKsystems

Level 2 Expert

72 Answers

Are you a Radio Shack Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...