Question about JVC AV-48WP30 48" Rear Projection Television

1 Answer

Flashing red or green over picture when only warmed up

The lines are thin and thick at times they are pretty straight and they flash sideways.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • JVC Master
  • 8,617 Answers

That sounds like a problem in the deflection circuits which is the large board on the right side of the TV. You have to be careful with that model not to remove the back with out unplugging the power cord because if the back is removed while the power cord is plugged in you will damage the digital circuits of the TV. The site I work for has any parts for that model JVC which are used but the work good, Had a cracked picture tube so all other parts are in excellent working order. They would most likely make you a good deal on the deflection board. Heres their link leave them an email stating your model and what you need.
http://servicemanuals.vstore.ca/

Posted on May 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a SONY KF-WE50 rear projection tv, a few weeks ago it started to turn the pic and sound off while the green light was flashing around 30 times. After the light finished flashing both the picture and...


the green is the reboot process and is normal.
the red light is an error code indicator.
count the blinks of the red light...it cant be 30 times (I think)
it will blink a sequence, pause, then do it again for a total of three times.
count carefully, it gives you three chances to catch the number it is blinking.

Apr 13, 2011 | Sony Projection Televisions

1 Answer

Hi, About 3-4 weeks ago I replaced the bulb on my


I am having the same problem as mg2low. I changed the lamp, but my Sony KF60WE610 still will not turn on. It flashes green several times then it begins to flash red. Can you recommend some trouble-shooting for me? Thanks, Richard

Sep 05, 2010 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

Flashing red light saying lamp and no picture.


REPLACE LAMP !!!
Buy an Orginal Replacement Lamp.

May 19, 2010 | Sony Grand WEGA KDF-50WE655 50" Rear...

2 Answers

No sound or picture, 2004 pt50dl54j


remove back panel. blow out all the dust from all the components except the fan on the right.
Vacuum out all the dust.
Have you replaced the lamp? that would help too.
There are 2 small red lamp. One indicates HEAT problem. The other one is the LAMP indicator.

Jun 13, 2009 | Panasonic PT-50DL54 50" Rear Projection...

1 Answer

There is just three lines that show red, green and blue.


It has been my experience with Sonys that those three colored lines indicate that the set is having trouble with the data communication lines. The hitch is that a model as complex as that one has as many as five seperate clock/data lines and if any one of them goes down the set will exhibit your symptom. It will take a professional to track down which line is causing the problem. I've seen audio output IC's as well as tuners cause the problem.

Jun 03, 2009 | Sony KP-61XBR48 61" Rear Projection...

1 Answer

Hitachi 32" Plasma TV fault on screen thin pencil type line on left hand side of screen from top to bottom. Line thickness is approx 1mm TV is 5 years old Thanks Tom


iav a sky 42 inch plasma model number pd54250 when i swich it on i av got a green lined picture sometimes it comes on with a full picture can you help

Nov 22, 2008 | Projection Televisions

1 Answer

60 inch sony wega tv


Green flashing is normal. Red flashes are error codes. Count the error flashes.

3x - Lamp cover position or cover detect switch bad.
4x - One or more fans failed RPM test
5x - Lamp power supply/ballast failure
6x - Thermal fuse failed (usually)

Oct 16, 2008 | Sony Grand WEGA KDF-60XS955 60" Rear...

1 Answer

Toshiba 52Hmx94


How many times does it blink?
I replaced the ballast in my 62HM84 and it fixed it. The problem was TV would not turn On, Red light solid green light blinked 9 times then TV would try to restart. At first I thought it might of been the bulb, so I replaced it, same results. Next I replaced the ballast which is pretty easy, just take pictures before you remove the light engine so you can go back to the picture to verify the connections when reinstalling.

Dec 25, 2007 | Toshiba 52HM95 52" HDTV Projection...

1 Answer

Red lines, green lines, now static!


Uneven colors with multicolored lines in the center of the picture and/or flashing, C9A37 and C9A38 both 3300 UFD 10 V part # 181P732040 on the Power PCB (part # 930B921002)

Nov 27, 2007 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

No picture or sound - Power Save light blinks red 5 times - nothing on the screen


i also have the same problem with the flashing green light for a while then a different red light starts blinking on and off around 5 times....and i replaced my burnt bulb with a new one...still no picture.

Oct 24, 2007 | Sony Grand WEGA KF50WE610 50" Rear...

Not finding what you are looking for?
JVC AV-48WP30 48" Rear Projection Television Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Projection Televisions Experts

easy alberta
easy alberta

Level 2 Expert

132 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68224 Answers

Are you a JVC Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...