Question about Car Speakers & Subwoofers

2 Answers

We have a 91 Jaguar XJS and need to know how to find and enter radio code. Thank you Don Houchin

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Hello Don

The way to recover the radio code is to remove the radio and copy the Serial Number off the radio's label, then take it to a Jaguar dealer's Parts Dept. where they can get the code.
It usually starts with a letter followed by about 9 or 10 numbers then a space and 4 more numbers...the last 4 are the code.

Thank you for using Fixya, and please "Accept" the solution if it helps you in any way.

Cheers!
IrishDruid

Posted on May 21, 2008

  • Swilin Sampson
    Swilin Sampson May 22, 2008

    Well, you can remove it this way:

    Knobs should pull straight
    off. Under them is a locknut with two notches 180 degrees apart.
    Unscrew both lock nut, remove the time panel. Now there should be four fasteners in the corners, Push in the pin to release the tension on each
    and slide the radio out. You will need new pins.

    If not, try slipping a thin plate like a putty knife down both sides of the radio. This releases spring clips and the radio should slide out.

    If you are in Europe, you can try this link:
    http://www.skjagtech.co.uk/support-pages...
    (they charge you for this service)

    Hope that helps!


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

Nice..had a 76 Jag, myself...can you let me know which radio you have installed on that model, please?


Posted on May 21, 2008

  • Patrick Michaels
    Patrick Michaels May 21, 2008

    and, where was the Jag made?

  • Patrick Michaels
    Patrick Michaels May 21, 2008

    Nice, ID>.and what if this fellow, like most sane folks, or those who have had Jags, know how weird it is to extract anything from a Jag console?

    you guy, you...


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost radio code jaguar ,alpine part no 4x43-18b876-ac jacc4040672655


In case radio unit is not fitted in the orginal car dealers wouldn't help you with code by VIN number, however you can calculate your radio code from radio serial number online here:

http://www.radionavicode.ivgsoft.com/select.php?MK=20

Note, this is only place where you can get your Alpine made Jaguar radio codes online

Aug 22, 2011 | Alpine Car Speakers & Subwoofers

1 Answer

Trying to remove a kenwood car stereo from a 91 vw golf


If you didn't purchase the radio new, then you probably don't have the pull tabs. New radios come with pull tabs. Basically they are designed to fit into both sides of the radio, just where the locks that keep the radio in the dash are. The old school method is the find the thinnest knives you can, one for each side. Remove the trim ring. Slide the knives (one on each side) inbetween the stereo and the metal mounting sleeve. You will need to keep both in place until your radio is about 1/2 way out. CAUTION, don't pushe the knives in too far, The locks are about 1 inch - 2 inches in.

Hope this helps

Aug 15, 2011 | Car Speakers & Subwoofers

1 Answer

97 mercedes benz radio is not working when i turn it on its says code n i enter know what the code is. I need help....


Unfortunately, this will probably be a dealer visit issue. You will need your VIN number for the vehicle. It may cost a little, but if you don't want to replace your stock radio, this is the route to go.

Aug 14, 2011 | Car Speakers & Subwoofers

1 Answer

Battery was disconnected and now the radio says Code Wait. I have Radio Code, but don't know how to enter it. The manual does not address the stereo system. The system is in a 1999 BMW 323IC. Where...


Leave the radio SWITCHED ON...UNDISTURBED for as long as it takes to automatically reset itself
This may take an hour or more
Make sure you have the correct code

Jun 10, 2011 | Car Speakers & Subwoofers

2 Answers

Im looking for a procedure to remove the safe mode on a smart 450 stereo car. I have the code number, but I really don't know how to introduce it.


It is showing SAFE because wrong codes have been entered previously

Leave the radio SWITCHED ON...UNDISTURBED for as long as it takes to automatically reset itself

It may take an hour or more

May 09, 2011 | Car Speakers & Subwoofers

1 Answer

Hi, I have the code for my gm2002 radio but dont know how to enter it, can you help?


Although I'm not totally sure how to solve your problem because I don't know what kind of car/radio you have, this website should have the information you need to enter the code on your radio. http://www.radio-code.co.uk/code-entry-help.php All you need to do is click on the brand of radio that you have, and search through the list for your specific radio.

Mar 01, 2011 | Car Speakers & Subwoofers

1 Answer

I have a Blaupunkt Radio cassette mounted on my car Peugeut XT 306, I changed the battery and now I need the code. I would also like to know how to enter the confirmation code and its . Thank you for...


We need the serial number of the unit found on the label at the back of the case beginning with BP. You will need to remove the radio to find this.

Post up the details and I will have a look at it for you.

Thanks for using FixYa.

Jan 27, 2011 | Car Speakers & Subwoofers

1 Answer

Reset Car Radio for Opel Corsa Njoy


Try this..Turn your radio off, take the fuse out (for the radio) for one minute. Replace it and turn the switch on. Turn the radio on and enter the code. If this dosnt work you may have the wrong code. If you enter the wrong code 3 times it may lock and you will have to wait an hour before entering again.

Jun 15, 2009 | Car Speakers & Subwoofers

9 Answers

I need the code please for my Philips RC600 car stereo. PH600CY0142592 Thanks, Andrew


please explain your question.
like what code you need for your speaker?
Thanks

Jan 25, 2009 | Car Speakers & Subwoofers

1 Answer

Disconnected my battery on my mercedes benz c230 1998 now i need a code for my radio. I tried one like that now it says wait help please thank you


if you have the message «wait» you did put a bad code, you have to ask a mercedes dealer to have your original code with your serial number of your car.
the message «wait» disappear about 30mn the first time and about 1h the second time if you reenter a new bad code, after the radio will be blocked. so get the right code and before you'll enter it turn on the radio and wait until the radio reask to enter the code.
I hope this helps
Please rate accordingly
Thank You
sserpentio

Apr 26, 2008 | Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Speakers & Subwoofers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...