Question about Akai Projection Televisions

1 Answer

I have an akai tv model no. sn71b6 and was wondering if it would work in the irish republic,as i could give it to my uncle over there if it works. many thanks garry regan.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

No, we are NTSC and they are PAL, and the voltages are different as well. Too many issies with teevisions. You can't even send him a dvd to play on his DVD player, most likely

Posted on May 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to replace projection lamp on my 42 inch akai rear projection tv. Where is the panel I need to remove?


Akai is Samsung--If I may ask what is model number and problem so I can give you an answer that applies to your problem.

Apr 02, 2012 | Akai Projection Televisions

1 Answer

Have black dust looking spots on my screen.


Howdy;
Yes there is a way. The easiest for you would be to remove the back top of the TV. That will give acess to opt lense and mirror. But first check the Lamp and inspect the lense that the Lamp into. It does not take a lot to cause your concern. Use super soft cloth and wipe surfaces.

Good Luck,Big Irish.

Nov 22, 2009 | JVC HD-56G886 56" Rear Projection HDTV

1 Answer

When i turn on rca tv it shuts off after about 30 seconds


Hey; applelrton_man;

With out the type and age of TV you own it is hard to determine what is wrong with your TV. Example, if it's a projection, it may be the fly back. Or dlp it may the lamp. You see what I mean.

Please give Fixya the model we will be able to give you a more proper Fixya solution.

Thanks, Big Irish.

Nov 13, 2009 | RCA Projection Televisions

1 Answer

My 42" rear projection tv wil not turn on worked fine yesterday came home today tried to turn it on and you can hear it click inside and then the red light under "timer" just blinks i was wondering what...


I was handed the same model the other day.You're Lucky it clicks. The one I have is completely dead. I will give you an idea to try. Unplug your TV set......for a few days. Find someone who has acess to a variac transformer....And see if your tv will come on at about 70 volts...Somewhere less than 90 volts. If it will powerup, you will need the powerline regulator replaced. Part# STR X6459. I will purchase one for the tv I have and see if this will correct my problem.

Oct 11, 2009 | Akai PT4250A 42" HDTV

1 Answer

The volume, channel and TV/Video buttons are not working on either the TV (itself) or the remotes.


Good Day, amberhorwitz;
It sounds like you may have a Mitsubishi TV. Am I right? If so remove speaker grill, you will see cables, disconnect..... That should solve concern.... use remote ONLY. Or give model and brand. Also, try to 'reset' the TV. To reset unplug TV for 2 to 5 minutes then plug TV back into power (A/C).
Good Luck, big IRISH.

Aug 28, 2008 | Projection Televisions

1 Answer

Thanks


Good Day, hdj2269808;
So, you have a RCA TV that does not come on and you hear three thumps. What you are hearing is the TV trying to turn on, the TV will attempt do this . If you are technical please give me complete Model Number, if not please call an Authorized Service Center and have them come out and give you an estimate before repairs begin.

Let me know, big IRISH.

Aug 21, 2008 | Projection Televisions

1 Answer

I need to remove the base from my 42 inch plasma TV to mount it onto a TV stand. How do you remove the base?


Good Day;
The base is attached by four, inset, allen screws on the back of the unit, bottom. The 'key' word is INSET (recessed).
Good Luck, Day, Big Irish.

Jun 18, 2008 | Akai Projection Televisions

1 Answer

An Akai PT 4298HDX/SMS with a blinking red light


it jus depends on your electronic back ground and if you have multimeter and solder equipment. or a little easier ifnyou can confirm it is the power/deflection cba it is sold as an entire assemble in this model that does not require solder work to change. big board on the right looking at from rear with large black transformer on it with red wire coming from top. a company called vance baldwin sells these parts

Jan 22, 2008 | Samsung HCM4215W 42" Rear Projection...

1 Answer

Akai tv


have a good tv guy repace you convergence amp's john

Jul 31, 2007 | Akai PT4298HD Rear Projection Television

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

seerads

Level 2 Expert

77 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you an Akai Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...