Question about Cell Phones

2 Answers

Anycool T808: LCD in sleep mode something... NEED HELP!!! Need full reset or promts...

I've got a big problem with my Anycool T808. Can you help me to swich off the sleep mode in Engineer Mode " *#3646633# " ? When I swich off the Sleep Mode it does not stay OFF! LCD working on 1/3 of normal bright- I think it's because of Sleep Mode and I don't know how to fix it. the first thing I did was restoring factory default settings in "Settings" section of user's menu- I did
it several times and there is no problem with basic parameters reset such as all user's settings, BUT THIS DID NOT HELP to restore the normal LCD state! It's still very dark... I can see the normal brightness in two cases:
with the charging goes on the swiched off phone and when I'm swiching it
on- about 2 sec. of "Rising Sun" picture... I just could swich
the Sleep Mode ON in Engineer Mode(*#3646633#),-I was in there just to
check memory papameters sinse the micro SD card was unaccessible when I
swiched T808 at the first time. But Now I think the problem with LCD
could be not only because of Sleep Mode couse it was working properly until that
actions: battery has out of charge- appeared the report about
self-swiching off, then T808 swiches off, then I connect it to the USB
port of PC, then appeared the animation of charging the battery by USB
on a bright blue background, then I'm swiching the phone on and THEN I
see that screen is in very low level of brightness such as the
intermediate livel between the screen's normal mode and it's shutdown
mode when it's not in use set time. I thought that it is related to
the Sleep Mode(sinse it looks Just Like This)and that's why I was
trying to swich off The Sleep Mode in *#3646633# menu. But swiching
the Sleep Mode in OFF state was unsuccessful sinse the program does
not remember this position and it's still "ON". It's still possible
that the Sleep Mode is related to the screen problem because the
swiching off and swiching on the phone after the run out the battery was the
first reload after my descovery the *#3646633# mode.

So I guess I just need a hard reset or full reset. Maybe that's
because of some program failure...
I would be happy and thankful If you'll tell me what to do.
New Firmware can help me I think,but in Kharkov UA where I live in
it meets a big problem and as I heard the TVset could not work after that...
If thare is no other way exept the new firmware maybe you
can send me it?
This is not realy possible to find out without specialists I can contact like You...
I like my T808 very much and hope it will be ok...

Please feel free to write to me.


Whith hope and kind regards,Tim.

Posted by on

  • w123456 Jul 05, 2008

    i have Lh01 phone same problem

  • Anonymous Jan 05, 2009

    when i connect my usb cable to the computer from my t808 anycool phone it just says charger connected its not even saying anything about the usb and i cant find it connected on my computer ... it was working properly about 3 weeks ago and now its doing this ... SUM1 HELLLP grr

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Cant receved the sms but outgoing sms is working

Posted on Sep 26, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It's called economy. Go to settings > Phone setup and it's last on the list. Turn it off.

Posted on Dec 20, 2009

1 Suggested Answer

  • 1 Answer

SOURCE: Hi, I have one T808 mobile but could not use it

internet settings china mobil u800, please send.

Posted on Jan 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I reset my iphone 3g and now its been frozen for 2 days, it only shows start-up apple logo. please help!


Do a hard reset.
  1. Press-hold the Home button (big circle below the screen) and the Sleep/Wake button (on top of the iPhone) simultaneously.
  2. Continue holding both buttons (Ignore the "Slide to power off") until the iPhone shuts off and begins to restart.
  3. You may let go when you see the silver Apple logo.
  4. You have completed a hard reset successfully.
  5. Don't be alarmed that it takes quite a while to load from the Apple logo to the main screen. This is normal.
If this does not work, put into recovery mode and restore from itunes.
Step One
Open iTunes and connect the iPhone to your Mac.
1350.png

Step Two
Press and hold the Home button and the Sleep/Wake button at the same time.
1349-500.png

Step Three
As soon as the screen goes black release the Sleep/Wake button. Continue holding the home button until you iTunes pops up a message telling you that it has detected an iPhone in recovery mode.
1351-500.png

The iPhone will look like this:
1352.png

Feb 28, 2011 | Apple iPhone 3G

1 Answer

My iphone 3Gs is not starting up and is stuck on apple logo. Please help


Do a hard reset.
  1. Press-hold the Home button (big circle below the screen) and the Sleep/Wake button (on top of the iPhone) simultaneously.
  2. Continue holding both buttons (Ignore the "Slide to power off") until the iPhone shuts off and begins to restart.
  3. You may let go when you see the silver Apple logo.
  4. You have completed a hard reset successfully.
  5. Don't be alarmed that it takes quite a while to load from the Apple logo to the main screen. This is normal.
If this does not work, put into recovery mode and restore from itunes.
Step One
Open iTunes and connect the iPhone to your Mac.


Step Two
Press and hold the Home button and the Sleep/Wake button at the same time.


Step Three
As soon as the screen goes black release the Sleep/Wake button. Continue holding the home button until you iTunes pops up a message telling you that it has detected an iPhone in recovery mode.

Feb 22, 2011 | Apple iPhone 3G

1 Answer

My phone will not ring, it is not on any silent modes


If something isn't working right, restarting, force quitting an application, or resetting
iPhone will likely solve the problem.
Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears.
Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and
hold the Sleep/Wake until the Apple logo appears.
If you can't turn off iPhone or if the problem continues, you may need to reset. A reset
should be done only if turning iPhone off and on doesn't resolve the problem.
Force quit an application: Press and hold the Sleep/Wake button on top of iPhone
for a few seconds until a red slider appears, and then press and hold the Home button
until the application quits.
Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the
same time for at least ten seconds, until the Apple logo appears.

Sep 30, 2010 | Apple iPhone 3G

1 Answer

Hi, I have one T808 mobile but could not use it


internet settings china mobil u800, please send.

Dec 10, 2009 | Cell Phones

2 Answers

My iphone froze i took a screen shot and the screen is completely white im still getting calls and text messages but i cant acess them i need help now!


Trying doing a hard reset on your iPhone:

1. Press the home button (the big circle below the screen) and the sleep wake button (the button on top of the iPhone) simultaneously.
2. Hold both buttons simultaneously for a few seconds, Ignore the "Slide to power off" and keep holding
3. The iPhone should now shutdown automatically - (fade to black)
4. Turn the iPhone back on by hitting the sleep/wake button.
5. You should now see the Apple logo, your iPhone is restarting and thus booting up.
6. You have completed a hard reset successfully.

Oct 20, 2009 | Apple iPhone 3G

2 Answers

SIM LOCK


hi i locked my sim card, i went onto 02 website and went onto PUK code. it asks you to put your phone number in then comes up with the code. i put the code in and it it worked

Jun 26, 2009 | Samsung SGH-D600 Cellular Phone

2 Answers

SECRET CODES


SAMSUNG UNLOCK CODE....
*2767*688# = Unlocking Code
*#8999*8378# = All in one Code
*#4777*8665# = GPSR Tool
*#8999*523# = LCD Brightness
*#8999*3825523# = External Display
*#8999*377# = Errors
#*5737425# = JAVA Something{I choose 2 and it chrashed}][/b]
*#2255# = Call List
#*536961# = Java Status Code
#*536962# = Java Status Code
#*536963# = Java Status Code
#*53696# = Java Status Code

#*1200# = AFC DAC Val
#*1300# = IMEI
#*1400# = IMSI
#*7222# = Operation Typ (Class C GSM)
#*7224# = I Got !! ERROR !!
#*7252# = Oparation Typ (Class B GPRS)
#*7271# = Multi Slot (Class 1 GPRS)
#*7274# = Multi Slot (Class 4 GPRS)
#*7276# = Dunno
#*7337# = EEPROM Reset (Unlock and Resets Wap Settings)
#*2787# = CRTP ON/OFF
#*3737# = L1 Dbg data
#*5133# = L1 Dbg data
#*7288# = GPRS Attached
#*7287# = GPRS Detached
#*7666# = SrCell Data
#*7693# = Sleep Act/DeAct (Enable or Disable the Black screen after doing nothing for a while)
#*7284# = Class : B,C or GPRS
#*2256# = Calibration Info
#*2286# = Battery Data
#*2527# = GPRS Switching (set to: class 4, class 8, class 9 or class 10)
#*2679# = Copycat feature (Activate or Deactivate)
#*3940# = External loop test 9600 bps
#*4263# = Handsfree mode (Activate or Deactivate)
#*4700# = Half Rate (Activate or Deactivate)
#*7352# = BVMC Reg value
#*8462# = Sleeptime
#*2558# = Time ON
#*3370# = EFR (Activate or Deactivate)
#*3941# = External looptest 115200 bps
#*5176# = L1 Sleep
#*7462# = SIM phase
#*7983# = Voltage/Frequenci (Activate or Deactivate)
#*7986# = Voltage (Activate or Deactivate)
#*8466# = Old time
#*2255# = Call ???
#*5187# = L1C2G trace (Activate or Deactivate)
#*5376# = ??? White for 15 secs than restarts.
#*6837# = Official Software Version
#*7524# = KCGPRS
#*7562# = LOCI GPRS
#*7638# = RLC allways open ended TBF (Activate or Deactivate)
#*7632# = Sleep mode Debug
#*7673# = Sleep mode RESET
#*2337# = Permanent Registration Beep

Mar 16, 2009 | Cell Phones

13 Answers

Iphone does not ring on sleep mode


1. File manager in ipcsuite
/System/Library/SystemConfiguration/PowerManagement.bundle
2. Find the file:
com.apple.SystemPowerProfileDefaults.plist
Then rename it to:
com.apple.SystemPowerProfileDefaults.plist2

3. Reboot your phone

Apr 07, 2008 | Apple iPhone Smartphone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

1,587 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

IT Solution
IT Solution

Level 3 Expert

805 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...